Hardbody(D21) Adjustable Upper Control Arm Assembly

[@AmateurRedneckWorkshop]

Those parts look so nice I almost wish I had a Nissan.

[@bluehandsvideo]

Thank you very much Harold!! :)

[@sharktooth1985]

Damm wish I could still get some of these need them big time very kool..

[@bluehandsvideo]

If I do them again, it will have to be a group buy to be worth it. They were a ton of work and just not worth it. They're low on the list. I'd like to think I'll get to them this year, but maybe not.

[@lh1678]

Question?. So if you wanted to lower the front end as low as possible without bagging the D21..Would this work? Where can I get a set?

[@bluehandsvideo]

Some guys used them for that. I shut down over a year ago. I tried to find some else to take over making them, but didn't.

[@DCT_Aaron_Engineering]

Nice looking Nissan kits Mike. I bet these kits are falling off the shelf as fast as you can make them. Hopefully you get sales from all over the world too. Ok, off to watch your other videos now. :-)

[@bluehandsvideo]

Thanks Aaron!! I only have 8 of the original 14 sets left. They haven't been flying off, but this is some of the first "real" exposure they've gotten. They were a pain to make.....so I'm a bit undecided on making more at this point. lol

[@erasmovelasques8071]

Hey where to buy this parts please let me know thanks

[@bluehandsvideo]

I'm trying to turn them over to another shop to do.... pastpowerparts.com Not sure how long it will be before they're available.

[@MaGZKaRmA]

Will these work on a 720?

[@bluehandsvideo]

I don't think so, unless the shock tower and suspension were the same as the D21. It's a moot point though since I won't be making any more.

[@titusfox3177]

Any of these control arms for sale??

[@bluehandsvideo]

I just got done with another batch of them. Not sure when or even if I'll do any more. There's more info about the last run on my site... bluehandsfab.com

[@runcoltrun]

oh man... I just checked your site and your closing it down? I only see the cross shafts available :/

[@bluehandsvideo]

That is correct. There's a slight chance that some or all of the parts will be picked up and made by another, but I have no clue how soon that will happen since they're moving to a new location right now.

[@devinlewis5693]

@@bluehandsvideo Has this new person started manufacturing? I would love these arms so I can do a coilover conversion

[@bluehandsvideo]

@@devinlewis5693 Not yet. I just sent him a msg to see if he's gotten his mill up and running yet. You can contact Kyle at pastpowerparts.com/ and see if he has a time frame in mind. He hasn't said he's ready to start, so I haven't sent him any of the designs yet. I'll have to watch the vid to see just which style of arms these were.

[@TheL3GITOne]

Dang, wish I found these when I bought upper control arms to lift my truck a bit. You wouldn't happen to know if these will be available in the near future? I have a severe caster difference and causing an annoying pull and need something to adjust it. These parts look like they have the perfect adjustments.

[@bluehandsvideo]

There's been talk of another company taking over all my parts, but they're still moving and don't have their shop up and running yet.

[@TheL3GITOne]

@@bluehandsvideo Hopefully they will. I found the company once before but can't seem to find it again. Who is it again? And thanks for replying back so fast.

[@sn15familyiseverything96]

What are those for

[@bluehandsvideo]

These are adjustable upper control arms for the Nissan D21 pickup.

[@weldmachine]

Hey Mike. Very good kit you put together. The tapered washer is a great idea, and looks the best option to go with. If we want to fit this set up to our cars, we need to have it inspected by an Automotive Engineer $$$. And even then it,s not guaranteed they will pass inspection. You seem to have very relaxed modification rules in the States. But like most things in life, the people who do the wrong spoil it for the people who do the right thing. Usually Rules / Laws are made because some idiot has done something wrong now they need to change the Rules / Laws to guard against a repeat of this happening again. Thanks for showing us your suspension kit, it was good to see the work that you do. Regards Peter.

[@bluehandsvideo]

Thanks Peter! I agree....I like the coned washer the best too....that just popped up at the last minute as I was going out to the shop to reshoot the video of the spacer. I already bought 30 of them for another reason.....so this worked out really well for me. Anything that not D.O.T. approved is technically off road use only.....at least that's my understanding. You're welcome. Some of that video was shot over a year ago. LOL I've been a bit slow about editing it. :) Mike

[@tennareable]

How can I order these?

[@bluehandsvideo]

They're the first item on my site... www.bluehandsfab.com If you're not in the US, contact me via the the contact page so we can figure out the shipping difference. Thanks!

[@bluehandsvideo]

@The Blue Jeans Sorry...I sold out of them over a year ago. It's still a bit up in the air at the moment as to whether I'm doing any more this summer or not. I've had a few people ask about them....I should probably start a list. You can contact me via my site, if you'd like, www.bluehandsfab.com

[@bluehandsvideo]

@The Blue Jeans My instagram and FB will probably be the first place to see if/when I start on them. They're under the same name as this channel. :)

[@bluehandsvideo]

@The Blue Jeans You're welcome. :)

[@cesarconh895]

Are these a good option for LIFTING my 89 pathfinder?

[@bluehandsvideo]

The verdict is still out on that. I'm pretty sure they'll bolt up with out any issue, but I don't know about the ball joint angle yet. If I've heard right, the lifted trucks need slightly longer arms. Longer turnbuckles can be put on if need be......but the range of motion on the ball joint has not been checked on lifted or lowered rigs yet. So far, most of the guys that have bought them are running drift trucks or weekend racers....so they're not lowered extensively.

[@sn15familyiseverything96]

Would i be able to do alignments on my own with that.

[@bluehandsvideo]

Hmmm....it will certainly make it easier and allow a lot more range, but you can technically align your own front end with the stock setup....you just have to use shims.

[@nathanieljames8974]

Are these still purchasable?

[@bluehandsvideo]

Sorry. No. They've been gone for over a year.

[@chrisbishop2825]

Are these still for sale?

[@bluehandsvideo]

Sorry, not at this time. There's been some talk about a group buy or making more, but I doubt it will happen soon. You can find a bit more info or contact me at bluehandsfab.com Thanks. Mike

[@toycelica185]

👍🏻

[@bluehandsvideo]

Thanks :)

[@meanpaintandbody]

I want them were do i buy and how much

[@bluehandsvideo]

They're on my site www.bluehandsfab.com ...first item.