Audi TT mk1, Rocker Cover and Cam Gasket kit

[@williampritchard7837]

Absolutely brilliant , clear and concise. Video of exactly what I needed . Thank you loads . 1:59

[@stevenharpervw]

Best review ever 😅 thank you. Like and subscribe

[@stevesloan6775]

Fourteen minutes in an you have impressed me with this video. Really excellent camera work and real-time description.

[@stevenharpervw]

Thank you 😊 I couldn’t find a video that really shows off the engine from different angles so others know what to look for or how it looks

[@allvan1109]

Thanks for sharing this video. My brother-in-law and I are going to change this gasket today.

[@stevenharpervw]

Hope it went well 👍 like and subscribe

[@stevesloan6775]

You had me chuckling at 2 minutes in…when you dropped that heat shield clip pin. haha! 🤜🏼🤛🏼🇦🇺🍀🍀🍀😎

[@stevenharpervw]

In my head I was f******** it’s gone forever , never to be seen again

[@GuruJay333]

Thank you 😊 🙏🏼

[@stevenharpervw]

I’m glad my video helped you . Like and subscribe as it really helps me out

[@dre4011]

Also SAME PROCESS for VW 1.8T AWP....1J Golf GTI & Jetta GLS & GLI.... You're very welcome 👍👌 (VW Tech of 28yrs)

[@stevenharpervw]

With your 28 years, did I do a good job explaining the job, did I miss anything ?

[@stevesloan6775]

I love what you bring up regarding the 3d printed tool. Definitely design in the top tool part way stronger(more material).

[@sebastiancristea2347]

Grat stuff, the best video out there showing haw this job is done. 👍

[@stevenharpervw]

Thank you so much for those great words of encouragement

[@sebastiancristea2347]

@@stevenharpervw Thank you mate!

[@andreacannizzo9641]

Excellent and detailed video! The only doubt I have is if you cleaned enough of the parts near the half-moon before installing the new gaskets

[@stevenharpervw]

Thank you . Yeah I Totally agree but it’s very difficult to clean the parts near the half moon where that blue seal fits, because access is so difficult, So far no leaks.

[@julesmatthews2178]

Hiya pal Watched the video you did on the red oil warning light . And it turned out to be a faulty pressure sensor 👌

[@stevenharpervw]

Ah deadly ! I hope my videos helped you.

[@julesmatthews2178]

I have that now the car runs brilliant no untoward noises or any blue or black smoke or anything.changed engine oil other day different type oil and I’m not sure if that’s affected it as I’ve never had the warning light before.so I’ve dropped the oil and put castrol edge back in what I’ve used the most but after half hour or so it beeps again red light. I have zero strange engine noises .. stupid car 🤣

[@julesmatthews2178]

@@stevenharpervw I’ve not got a sensor yet 🙏

[@hugoreyes6757]

Did you get new nuts for cover or can you reuse them ?

[@stevenharpervw]

Reuse then

[@izb8yt]

Donyou have to change the chain tensioner gasket when replacing the valvecover gasket

[@shayzaadkallan8978]

It's not necessary, but while your down there then why not, because they do leak at some point

[@stevenharpervw]

If it’s leaking or you don’t want to do the job twice then yes 😉

[@stevesloan6775]

Loctite is a gimmick 100%… That being said choosing your correct locktite is critical, but you only realise when you go to remove said bolt.

[@stevesloan6775]

Man you start getting those sweat KZbin money you need to buy a submerged parts cleaner pump😂 Way Way Way quieter!

[@stevenharpervw]

I got the pump for €15 and everything else for free. I was like. This will never work…. ( apart from the noise) it’s actually really handy and I have used it a load now on different Agri parts as well as car parts

[@stevesloan6775]

The only constructive criticism I’ll give, is I’d of loved to see you put on some nitrile gloves on when handling the new gaskets and seals. Oils are not your friend.

[@stevenharpervw]

Yes 100 % agree with you. Stopping every minute or so to record as I work I find the gloves disappear but you are correct I do always try and wear them