No Spark China Quad 12Volt CDI Hack makes troubleshooting easy,

[@RustyGlovebox]

No spark... If only I knew someone that could help..haha , Great job Harvey !

[@HarveySpooner]

Hey Rusty, I am asked so many ignition questions, I figured that I would clean up the videos and put them all in one play list.... I hope it keeps a few ATVs out of the scrap yard.... Thanks for your thoughts, encouragement, watching, and commenting Bud!!!

[@kachiskid]

Bro, you must wake up every morning, look in the mirror, and know...this is one cold dude! Learned a lot from you, keep up the great work.

[@barrydoucet3213]

Sorry if I missed it, but have you showed the wiring of a honda keyswitch on a chinese sunx 250gcw

[@johnbonetski6683]

Can u change wire harness on viper 90r 2 stroke everything runs threw the cdi I have no spark

[@HarveySpooner]

Hey John, If there is a pulse generator, U can use this CDI hack... I hope this helps, thanks for asking, watching, and commenting, Good Luck!!!

[@johnbonetski6683]

Harvey Spooner I don’t think there is

[@HarveySpooner]

Hey John, Can U mount a pulse generator such that it is adjustable a little in front of TDC.... U should be able to wind up to 6k rpm, maybe a bit higher.... Kind of an interesting experiment to play around with.... Thanks for asking, watching, and commenting!!!

[@johnbonetski6683]

Harvey Spooner I have good ground power to the coil butt I’m not getting any reading on the mutimeter from the stator

[@valentinevenegas2592]

Have the same problem did you ever find out what it was?

[@TheZantiago2000]

Harvey!!!! watched your playlist about no spark learn how much as i could and try to understand it. troubleshoot it. everything seems fine bought a chinese ac cdi. Got spark!!! thanks Harvey you helped me alot. i was about to lose hope. Should i buy a original honda cdi or is the chinese ones just fine? Its a Honda 200e 1983

[@joshd7142]

Hey I had another question if there gas in the oil what that mean? Maybe a carburetor rebuild?

[@HarveySpooner]

Hey Josh D, Gas in the oil normally means that the carb float is leaking by, the gas is flooding the carb, going into the engine, where it works its way by the piston rings into the oil.... I tend to turn off the gas for all my stuff and let the engines run until the carb is empty.... Frequently, I find that the fuel shut off valves leak by also and one can end up with the same problem... A long path to the answer, sorry.... Yes, a carb rebuild, using a kit with a fresh float needle valve is the place to start, I would also make sure there is a fuel filter, so nothing gets down into that valve seat to all fuel to flow, I would also check the fuel tank turn off valve, replace if necessary, and also run the carbs out of fuel unless the ATV or motorcycle is going to be used right away.... Thanks for asking, watching, and commenting!!!

[@joshd7142]

Harvey Spooner ok thank u for the advice I

[@CalvinsCorner72]

So your making playlist on the different models of videos for us? That would be helpful for people to be able to find the video they need for their model right? I know it would take a while but it still would help out others and might keep them from asking for the same videos too. Your a good fellow doing this all the time for them. As long as your enjoying all your days. .....

[@HarveySpooner]

Hey Calvin, Great minds must think alike, I was thinking about making a play list for the 400ex, then 300ex, trx250, then the 200s, and the 200sx... I don't mind asking most questions... Thanks for your thoughts, encouragement, good ideas, watching, and commenting!!!!

[@paulcalhoun6339]

Harvey, it seems like I spending more time watching your tube then tv. I at least learn more. I would love to build a CDI hack box. Do you have plans you send out?

[@HarveySpooner]

Hey Paul, I love the idea that U spend more time watching my channel then TV... I used to watch politics, now, it just gives me a head ache, makes me want to buy my own mountain top somewhere surrounded by self sufficient folks who build things.... I put all the info U should need in that play list, (located in my library), I put the last video on the Casoli CDI in there today.... Here is the link - kzbin.info/aero/PLXe3Ur9S11oeX8iOzfD80fe5fpK37tg5W , Please ask if U have any questions.... Thanks for the kind words, asking, watching, and commenting!!!

[@paulcalhoun6339]

Harvey Spooner Harvey Thanks. I have all the parts q up in my eBay cart as a write this. I just watched your Casoli vid as I dutifully wait in Tate's supermarket parking lot. By the way it was cold here in my part of Florida this morning - 64°.

[@macsboost01]

will this hack work for ac cdi? do you have any wire up scematics?

[@HarveySpooner]

Hey Mac, If one wants to use a 12VDC, one has to use a DC cdi... To power an AC cdi a stator coil needs to be used as power... I may try using a 25 VAC source as an experiment, but, as of now, I have not tried it.... Thanks for asking, watching, and commenting, Good Luck!!

[@macsboost01]

@@HarveySpooneri just ordered a dc cdi, but thank you so much for your time! your info is greatly appreciated, and you have great content keep it up!

[@HarveySpooner]

Hey Mac, Thanks for Ur kind words and support.... I wish I had more time for the channel and to reply to comments!!

[@Mbruno916]

My bike has 5 extra wires coming from the same place as the stator. they are not individual wires but all 5 are connected side by side like a kit kat and all white...very strange

[@HarveySpooner]

Hey Hella! I'm thinking the extra wires are for the digital display that indicates what gear U R in, is it a 4 speed and reverse??? Thanks for asking, watching, and commenting!!!

[@paulcalhoun6339]

Harvey, first, thanks for you vids. With your guidance I finally have my 96 Honda up and running again. Question: in theory should you CDI hack box work on Polaris ATV?

[@HarveySpooner]

Hey Paul!!!! In theory, yes, if there is a stator for ignition, the Pit Bike hack would work, the 12Volt GY6 CDI/matched spark coil hack would work on anything with a pulse generator, as would the the Casoli 12Volt GY6 CDI/matched upgrade. Having said that, I have used the 12V hacks on Hondas, China quads, China pit bikes, and a Yamaha G6 golf cart motor... Personally, if I was trying to hack a Polaris, I would use the 12Volt Casoli GY6/matched spark coil hack and call it an ignition upgrade.... I should have a video on that ignition system up tonight....Thanks for asking, the kind words, encouragement, watching, and commenting!!!

[@paulcalhoun6339]

Harvey Spooner Thanks! I will take you advise. I will let you know the results.

[@GreatNorthWoodsHillbilly]

What you could do is do a video where you put it on a cd with links and part numbers to build it and sell it as a instructional video on ebay.

[@HarveySpooner]

Hey Great North Woods Hillbilly!!! An instructional CD, that is interesting!!! Good suggestion!!! Will have to put some thought into that.... We have winter coming back for the next few days, hopefully, the melt sets in strong after that.... Put up a video on the go carts of the hoard, plz take a look and let me know what U think.... Thanks for the suggestions, Ur thoughts, watching, and commenting!!!

[@craigbailey4448]

what would. make a Honda. 90cc rocket. not start but turn. over. any help

[@amandavallance6291]

hey i have a 125 cc tao tao im have a no spark problem changed stator and starter also changed cdi what could it be

[@tonymontana-vm3ty]

Hey harvey its a minni chopper does that make a difference,?

[@HarveySpooner]

Hey Tony, The China stuff I work on all seems to be the same for all the 4cycle stuff, the 2cycle engines can be interesting.... Thanks for asking, watching, and commenting!!!

[@tonymontana-vm3ty]

Harvey Spooner well it has a pullstart and a push Button but no cdi box just a regulator it has a yellow~red wire and a green that comes off the push button, then the pull start ignition coil has green,and black and a red wire where do they go to the sylinoid please help, ur are the man.

[@HarveySpooner]

Hey Tony, Is Ur minichopper a 50cc 2 cycle engine???? Thanks for the info, Ur thoughts, watching, and commenting!!!

[@tonymontana-vm3ty]

Harvey Spooner yes

[@tonymontana-vm3ty]

Harvey Spooner , im getting spark from the pull start and put a little gas down the carb but still wont fire i disconected the fuse the key lock and the kill switch ,and hand brake ,what could it be ,? Damn chinese bikes

[@cassandrabutler6928]

hey need 110 Chinese atv ant no fire on plug or wire

[@mariendeleeuw6537]

hi harvey, i think my stator is broken because im getting a reading of 117 ohms and when i crank the engine over im getting 12-13 volts. do u know what voltage u should be getting?

[@HarveySpooner]

Hey Marien, I'm going to drag a China quad out of the weeds over the next few days, I'll go thru all the readings on that, stay tuned..... Given the readings U provided, I think Ur stator maybe ok, I would expect it to be lower if shorted and given that it is hard to see the peak voltage, (should be around 45v I think but, it is hard to capture that with an ordinary DVM.... Did U check everything else, I rarely have a stator go bad.... Thanks for asking, watching, and commenting!!!

[@mariendeleeuw6537]

Harvey Spooner well the previous owner hacked up the wiring loom so i think he put the battery direct to the stator and blew it. i have checked the cdi and tried another one, still didnt work, the trigger was around 150 ohms and gave around 0.2 volts

[@HarveySpooner]

Hey Marien, Sounds like he may have taken out the cdi, stator and pulse generator, not a bad idea to replace the wire harness also, if U can find something like this, www.ebay.com/itm/CDI-50-70-90-110CC-Wire-Harness-Assembly-Wiring-Set-ATV-Electric-Quad-Coolster/262902310138?epid=692498679&hash=item3d3632e4fa:g:VZ4AAOSwWxNYz7b4&vxp=mtr .... I think it can be Ur most cost effective solution.... I hope this helps, thanks for asking, watching, and commenting!!!

[@mariendeleeuw6537]

Thanks! looks good but will the groundplate fit?

[@shiloh-onecallidoitall8886]

@@mariendeleeuw6537 hey did you ever find the solution for this? My stator is also giving out around 12 volts but im not getting spark. Ready to bring a little 150cc eton viper back from the dead!

[@tonymontana-vm3ty]

Yeah harvey i clicked on that link it says 400 error?

[@HarveySpooner]

Hey Tony!!! I say 400 pertaining to what???? An resistive value pertaining to Ohms, cost, or cc???? Thanks for asking, watching, and commenting!!!!

[@getitdonegarage]

Can u help.me with my baja 90 atv

[@craigbailey4448]

what would. make a Honda. 90cc

[@tstricklin4808]

Screw those other guys who would want money back 😂,just sell me one 👍

[@wtbm123]

How would i make a china bike spark again , lol

[@HarveySpooner]

Hey Terri, Sorry, I put up the last China ignition video today, (I hope), thanks for the laugh, watching, and commenting!!!

[@RoadFun]

Hi, i solve no spark.. fast and free !! very easy

[@HarveySpooner]

Hey Road Fun, For the China stuff, I tend to only be after functionality, I want to see if it will start, run, and shift thru its gears. I have a portable, self contained, 12VDC CDI box for that, if I want to restore the electronics, I tend to hack a $12 pit bike ignition, it provides me with everything including the left handle bar switches. I did subscribe to Ur channel as we have similar interests and there is always something for me to learn.... Thanks for dropping by, Ur suggestions, watching, and commenting!!!

[@tonymontana-vm3ty]

My wiring harness on this Little minni chopper is a messs can any one help me figure out this shit

[@HarveySpooner]

Hey Tony, I put together this play list to help folks with ATVs like Urs.... kzbin.info/aero/PLXe3Ur9S11oeX8iOzfD80fe5fpK37tg5W , Take a look, let me know what U think.... Thanks for asking, watching, and commenting!!!

[@tonymontana-vm3ty]

Harvey Spooner it only has a regulator and a pull start let me send you a pic

[@HarveySpooner]

Hey Tony, Is it a 50cc minichopper???? Thanks for the info, Ur thoughts, watching, and commenting!!!

[@rogeroconnor5182]

maybe you can group all the china stuff together since its apparent people keep asking the same questions about them. perhaps it will make it easier for people to find them and less work for you. did you get my email regarding the 350 dollar pos 200 sx i sent last night? i got a good laugh,another case of someone watching to much tv

[@HarveySpooner]

Hey Roger, I did see that POS, it was missing a lot of parts and had a recent paint job, right???? I made a play list of the more recent China stuff, now when I'm asked a question, I just refer to the play list first.... Thanks for the info, Ur thoughts, watching, and commenting!!!!

[@rexmorgan72]

I would certainly buy one for about $65 or maybe $70.

[@keontemingo292]

I need one ill pay the 99.75, my atv has been a headache

[@ouiroc]

Wait too much yak and about nonsense

[@ouiroc]

Definitely too much blah blah blah we don't care about where your shop is and the sun You're one of them guys if someone asked you the time they want to you want to tell them how to build a watch

[@robbiegwinn]

first

[@HarveySpooner]

Hey Robert, First, cool!!!! Thanks for dropping by first to watch and comment.... I appreciate my loyal viewers and friends!!!!

[@craigbailey4448]

what would. make a Honda. 90cc rocket. not start but turn. over. any help

[@craigbailey4448]

what would. make a Honda. 90cc rocket. not start but turn. over. any help

[@craigbailey4448]

what would. make a Honda. 90cc rocket. not start but turn. over. any help. any help

[@craigbailey4448]

what would. make a Honda. 90cc rocket. not start but turn. over. any help. any help