Arduino 10 Channels Wireless Transmitter Receiver | nrf24l01+| DIY 🔥

[@MohamedMusharafTEEE]

I made this it is not a fake video it is work well really. it is working I expected. I was very happy😁😁

[@hashincludeelectronics]

Thank you very much for your comments :) I am glad that this project helped you .

[@arprofessionalgaming464]

Your transmitter and receiver work properly till now?

[@JonathanDeWitt1988]

First of all I would like to say a very well done tutorial. The code explanation part seemed a bit rushed. But I think by pausing often the parts can be understood. And I understand why that portion was fast. The video would be much too long if you didn't. Besides, anyone who is going to be adapting your code to their project should be able to figure it out. I have been experimenting with both Arduino and ESP32 to control a 6-servo robotic arm. With the Arduino I've used an HC-12 module. I've been hesitant to switch to an NRF module because of the problems I've heard about them and needing so many Arduino pins for communication. Your tutorial is making me rethink using the NRF module. I'm very impressed by the responsiveness of your controls. And you dealt with the parsing on the receiving code nicely. You definitely earned my subscription. Thank you for sharing.

[@hashincludeelectronics]

Thank you very much for checking out the video and nice comment 👍I am glad that you found this video helpful. Yeah I kept code explanation short so that video does not become longer. Code is really straight forward and as you mentioned it can be customized as per project need. Thanks for subscription too 👍

[@Nkgfbf360]

@@hashincludeelectronics so nice ...

[@sgtsak]

This is a really good video. I have been building a custom radio for my model tugboat following a different video, with no audio. This video filled in some gaps for me. I’m soldering my project PCB boards. Thank you for posting.!

[@hashincludeelectronics]

Thank you very much for checking out the video and nice comment . I am glad that this video helped you 👍🏻👏🏻

[@sarfarajakram6386]

I have building a remote controlled ship about 10 feet long

[@Nkgfbf360]

Awesome one , its very useful to me, all the best for your upcoming video...💜💜💜🥳🥳🥳🥳😇🔥🔥🔥🔥🔥🔥🔥🔥

[@hashincludeelectronics]

Thank you very much 👌🏻👍🏻

[@sagarthakorlive]

Its a perfect 100% pure tutorial its called tutorial exately thanka a lot for this stuff

[@hashincludeelectronics]

Thank you very much for checking out the video 👍🏻👏🏻

[@dax_bro]

Which receiver code we have to use? "receiver" or "receiver_print_code" ??? Best tutorial in the KZbin ❤😊

[@hashincludeelectronics]

Thank you so much 👍🏻👏🏻

[@dax_bro]

But which code we have to use?

[@hashincludeelectronics]

@@dax_bro receiver 👍🏻👏🏻

[@dax_bro]

So much thanks 😊❤❤

[@hashincludeelectronics]

@@dax_bro welcome 🙏

[@witelectronic]

I tried it and it works perfectly. Very good. .....Mix two channel code ? Please. Thank you.

[@hashincludeelectronics]

Awesome 🙌🏻

[@olegsamsonik4939]

Hello! Very clear and great video. What needs to be changed in your code so that when you press one of the buttons, the LED lights up and goes out when you press it again. And what needs to be changed so that when you press one of the buttons, the LED blinks like a turn signal. I would like to apply your control in the model of the car where there is a headlight and turn signal control.

[@hashincludeelectronics]

Thanks for checking out the video. You can do that at receiver end. At receiver end you need to set the LED status (Use some variable). So when the LED status variable changes from LOW - > HIGH that is ( 0 -> 1) , then you consider toggling the LED. same you can use of blinks.

[@shadinov6334]

Thank you for uploading an amazing video!!!!!! 😍

[@hashincludeelectronics]

Happy to help 👍🏻👏🏻

[@jeremias5737]

Excelente video te felicito mi amigo. Eres el mejor, todo muy bien explicado y ordenado. Este si es un tutorial de verdad y no falso como en muchos otroa videos. Like y suscripción saludos

[@hashincludeelectronics]

Muchas Gracias 🙂👍🏻

[@jeremias5737]

@@hashincludeelectronics estoy haciendo un camion con su remolque a control remoto. Me sirvió mucho tu video saludos

[@valquiriavalor7082]

hola, no estas batallando con los modulos nrf? los mios no se comunican:c

[@jeremias5737]

@@valquiriavalor7082 hola si batallé porque habia visto otros tutoriales y crei que los pines los conectaban siempre igual y en este tutorial en lugar del el pin 10 era el 11 (el miso). Pero fue error mio por no verificar bien la conexión. Checa eso y ojala se te solucione saludos

[@valquiriavalor7082]

@@jeremias5737 muchas gracias por responder, hiciste algo extra para disminuir el ruido o solo seguiste tal cual el video?

[@davidtanguay7988]

I have the version with the Power Amp and external antenna. Had to modify the code to set the power level to avoid saturating the receiver during testing. Otherwise this project worked great.

[@hashincludeelectronics]

Thank you very much for checking out the video and nice comment 👍🏻👏🏻

[@bjornmosell1747]

Best tutorial ever❤

[@hashincludeelectronics]

Thank you very much 👏🏻👍🏻

[@samuddhaofficial4303]

Great. Can I use push on or push off buttons instead of normal push buttons? And how to use rocker switches, 3 position toggle switches in this project?

[@hashincludeelectronics]

Yes you can those buttons 👍🏻👏🏻

[@samuddhaofficial4303]

@@hashincludeelectronics Then there is no need to make some changes in the code?

[@samuddhaofficial4303]

​@@hashincludeelectronics please reply ..🙏

[@tamerkasmer1259]

Excellent!

[@hashincludeelectronics]

Thank you very much 👍🏻👏🏻

[@shahnewajbd4623]

Thank you for this type of video

[@hashincludeelectronics]

You are welcome 🙏

[@shahnewajbd4623]

@@hashincludeelectronics please make a video for how to reset factory a nodemcu 🙏

[@shahnewajbd4623]

@@hashincludeelectronics please make it

[@yash-hy8gr]

Make a full detailed video on programming please in hindi

[@bolivianracing]

Great application! Thanks for sharing. I'm interested in creating a transparent bridge for only digital signals (on/off) for industrial applications, where a machine is moving fast or in a complicated manner and there're great inconveniences routing cables that will break. The problem is electromagnetic noise. How to choose the best hardware platform to be in a safe situation and avoid loss of information because EMI. I've seen ESP32 using wifi may be more robust in this regard, what can you say about this? Would you still use the NRFs? Thanks

[@janpol2282]

Question: can I put a 10uf capacitor & adapter at the same time on the NRF24L01?

[@MrBoi96969]

bro i tried but i didnot get any pwm digits on serial monitor ( i have checked the circuit )

[@hashincludeelectronics]

Please check the video slowly and carefully for any missing step 👍🏻👏🏻

[@AkashDas-vx2ph]

Excellent sir ☺️

[@hashincludeelectronics]

Thank you 👍🏻👏🏻

[@dax_bro]

Can we use only 3.3v ic instead the nrf adapter?

[@hashincludeelectronics]

Please use that adapter as it resolves many power related issues 👍🏻👏🏻

[@savithagatty3234]

Thanks bro it's fantastic

[@hashincludeelectronics]

Awesome 👍🏻👏🏻

[@CrazyGaming-lw7cf]

@hash include electronic very nice video. Bro i have a question can we use dc gear motor instead of servo motor. Or we have to do something pls reply

[@hashincludeelectronics]

Yes you can use dc motor. Please check my videos rc car using nrf trans receiver module for reference 👍🏻👏🏻

[@arunkantony5803]

what is the value of potentiometer ? Thanks for the video

[@hashincludeelectronics]

@@arunkantony5803 10k 👍🏻👏🏻

[@newthinkofficial]

Very helpful video. Good job!

[@hashincludeelectronics]

Welcome 👍🏻

[@newthinkofficial]

@@hashincludeelectronics please create a videos:- how to connect a motor driver (to connect 775 12v dc motor) to this receiver ?

[@hashincludeelectronics]

@@newthinkofficial You can check my video on nrf24l01 rc car which uses L298N motor driver to control DC motor . You can use this receiver in the same way. Give it a try .

[@newthinkofficial]

@@hashincludeelectronics okay... Thank you..!

[@harshdhanawade]

Hello bro I don’t want the push switch insted of this i add more 2 X potentiometer & 2 X toggle switch What is want to do for this ?

[@hashincludeelectronics]

You can only connect potentiometers to Arduino analog pins . Regarding toggle switch you can use it instead of push button 👍🏻👏🏻

[@rohithraj2716]

How to control motor forward and backward does the code changes or can we connect motor in place of one servo Please tell bro Or we should use brushed esc or brushless esc Please reply bro

[@hashincludeelectronics]

You can check my video on Arduino nrf24l01 car for reference👍🏻👏🏻

[@rmilo]

Nice, im gonna use a arduino uno for the controller and a arduino mega for the car

[@hashincludeelectronics]

Nice . Yeah it should work as long as you make proper connections as per Arduino board . Make sure you use rechargeable battery only 👍🏻good luck and also share the experience later .

[@milanporbakht5198]

Perfect

[@hashincludeelectronics]

Thank you very much 👍🏻👏🏻

[@cuber_boi]

Can i use this roborace comp Will this control the pwm and brake or i have to buy a heavy motor driver like smartelex ?

[@Mirzazahed21]

Sir plz make transmitter and receiver for drone

[@hashincludeelectronics]

That will be a new project 👍🏻👏🏻

[@FFSTARZARD]

Can we make 14 channels in aurdino nano

[@hashincludeelectronics]

Yes we can . You can use analog pins as additional pins 👏🏻👍🏻

[@rccreators7758]

Thank god its working smoothervthan me

[@hashincludeelectronics]

Awesome 👏🏻

[@rccreators7758]

@@hashincludeelectronics hi bro ive made this but its rx is not working properly

[@dinesh_electronics_lover]

@@rccreators7758 i also face the same problem

[@shahnewajbd4623]

@hashincludeelectronics for using esc for a bldc motor,in the place of servo motor shall we need to change any in code?

[@hashincludeelectronics]

You will have to make changes in receiver code . The value written to servo motor is 0-180 and 90 is center position when joystick is at center . For BLDC you will have to make center position value as 0 when joystick is at center . 👍🏻👏🏻you can check my BLDC motor video for the reference and see how we can change the code accordingly . 👍🏻👏🏻

[@hansenlobo]

The power to reciver arduino should be given to 5v pin or VIN pin?

[@bhavikkrutharth]

Vin pin

[@dayyanmushair2050]

How to make a brushless motor go front and back pls reply

[@hashincludeelectronics]

It’s not possible to reverse the direction of BLdC motor programmatically . It’s has to be done by interchanging any 2 wires physically. There is another hack way to do it programmatically using 2 relays but it’s not recommended.

[@dayyanmushair2050]

Can u pls contact me how to do that because i am a beginner and i want to know how pls

[@Er.dilipkumar]

I want make a project which is wireless home appliances on ,off & and also show ampere & volt in remote display

[@hashincludeelectronics]

You can check my video on home automation for reference 👍🏻👏🏻

[@GuilhermedaSilvaCaetano0095]

i have a question,I can do this project with the ARM STM32 DEVELOPMENT BOARD

[@hashincludeelectronics]

Thank you for checking out the video 👍🏻👏🏻. I have not tried that module . I would suggest to use the same modules which I used in project to avoid issues 👏🏻👍🏻

[@adamrichic8753]

genius

[@hashincludeelectronics]

Thank you 👍🏻👏🏻

[@_Creativo]

so controller gets 7.4v? does it burn? also what is the max amps it can support? Great vídeo 😊

[@hashincludeelectronics]

Yes we can provide 7-12 V to Arduino . It does not burn.

[@_Creativo]

@@hashincludeelectronics Nice! thanks im buying the components to make my own

[@kunalsharma7890]

Sir this i best kya aap eka pcb bna doge jisse hm pcbway ya kisi bhi site se order kr ske or wire mess bhi n ho please sir it will be much helpfull agr aap kr pao to

[@hashincludeelectronics]

Currently I don’t have PCB for this project . 👍🏻👏🏻

[@kunalsharma7890]

@@hashincludeelectronics ok sir bt i think it will be helpful

[@ishtq]

Can I replace lights with DC motors with same wiring diagram , please fast answer

[@hashincludeelectronics]

You can not directly connect DC motors to microcontroller . You will have to use motor driver module to run DC motors 👍🏻👏🏻

[@mohsenganjkhanloo2408]

Hello brother.. it is possible to install a screen on this control so that the related settings can be made. Same as the Fly Sky control panel

[@hashincludeelectronics]

Yes you can connect 16*2 LCD display to it 👍🏻👏🏻

[@mohsenganjkhanloo2408]

@@hashincludeelectronics Can you teach me how to do this?

[@shahnewajbd4623]

Please add burshless motor with it on a another video please 🙏🙏🙏

[@zlatkoturcic3041]

Question: Why don't you use the switch in the joystick?

[@hashincludeelectronics]

You can use that switch as well if needed. However I used additional switches .

[@orange_tweleve]

It's kinda annoying to use that switch cuz there's a high chance to move the joystick axes while pressing down on it.

[@rajveernanaware2986]

Sir you have made very usefull and best video ever but sir i have been having a problem that i had aploded the the code correctly but it is not working i have checked the connection properly when i connect reciver to computer and opened serial monitor it is not showing any values please give me a solution sir

[@hashincludeelectronics]

Thank you for checking out the video 👍🏻👏🏻. Please make sure you use nrf adapter as I used . Also double check for any loose connections

[@rajveernanaware2986]

Yes sir i am using nrf adapter aswell and i check the loose connections also but it is not working sir can i message you personally because i have to submit this project in school sir please

[@chidinmaogbazi5687]

Good day, @hash include electronics. Thank you for uploading an amazing video. I am presently going through the connections and I was able to read the values from receiver code - print values on the Serial monitor (Chapter 8:08). I am presently stuck on trying to add the LEDs and Servos. I tried connecting just the 4 LEDs without a battery (just the USB cable to the computer), to the receiver connection and ran the appropriate sketch, to no avail as the push buttons were not able to turn them on, from the transmitter side. I must admit I made some adjustments to your given circuit. I used 2 pieces of NRF24L01 RF Transceiver instead of 2 pieces of Nrf24l01 1.1km Wireless module because my Nrf24l01 1.1km Wireless module did not seem to work.

[@hashincludeelectronics]

Thanks for checking out video 👍🏻 if you are able to receive the values then it should work for LEDs as well . Hope you have using nrf adapter as well . Try using battery supply . Don’t worry it will work .

[@chidinmaogbazi5687]

@@hashincludeelectronics Thank you so much for your help, it has finally worked, I only needed to solder a 10uF 25V capacitor to my nRF24L01 module even with the wireless adaptor in use. I am very very grateful. Thank you once again.

[@hashincludeelectronics]

@@chidinmaogbazi5687 awesome work 👍🏻

[@utkarshnaugariya2118]

If i want to use 12v brushed motor in place of servo and led

[@hashincludeelectronics]

You can use that . However you will have to motor driver module to run that 12 v dc motor . You can check my video on L298N motor driver for that . Also check my car related videos using nrf24l01 module 👍🏻👏🏻

[@madiyorsulton4432]

is it possible to do with two DC motor l298n driver in addition?

[@hashincludeelectronics]

Yes you can do that . Check my videos on rc car using nrf module for reference

[@gametube630]

good job!!!

[@hashincludeelectronics]

Thank you very much 👍🏻

[@zlatkoturcic3041]

Good video. Question: Can it all be connected without an nrf adapter? !

[@hashincludeelectronics]

Thanks for checking out the video . 👍🏻👏🏻. We can make this without nrf adapter but I would not recommend it . Nrf adapter solves many power related issues in this project . So please use it . It’s cheap as well .

[@zlatkoturcic3041]

@@hashincludeelectronics Did you mean that because of a possible voltage drop? I would try to solder the capacitor (25V 100 µF), if that is a possible problem, since I don't currently have an nRF adapter.

[@hashincludeelectronics]

@@zlatkoturcic3041 yes you can try that . But how you are going to power nrf module ? Using 3.3 v from Arduino nano ? Don’t think that pin can provide enough current . You can give it a try . However if you face issues then please buy those nrf adapter .

[@android99ff]

Can i use only servo or motor without using led

[@hashincludeelectronics]

You can use but you need to make changes in code where we used LEDs and push buttons . We are already using servo motors though 👍🏻👏🏻

[@hallanherbert8694]

⭐⭐⭐⭐⭐ it works well 👍

[@hashincludeelectronics]

Nice 👍🏻👏🏻👌🏻

[@hasiah611]

How to connect multiple transmitter to one receiver to light up led and trigger relay on the receiver side?

[@hashincludeelectronics]

You can use same pipe address in all transmitters 👍🏻👏🏻

[@hansenlobo]

The power to reciver arduino should be given to 5v pin or VIN pin?

[@hashincludeelectronics]

Power is provided through 5 v pin at receiver .

[@hansenlobo]

Okay. Did some further research and found this: Use a regulated power source, trusted to be 5V, and connect it to GND and 5V. Connect an unregulated power source, eg a battery, to GND and VIN. This should be above 6.2V (since the dropout voltage is 1.2V) and preferably between 9V and 12V. There is a built-in regulator that will supply the Arduino with exactly 5V. I'm this case we are using 5v step down BEC power supply when converts the given input voltage to 5v

[@hashincludeelectronics]

@@hansenlobo exactly . We are providing the 5 v regulated power from BEC to Arduino 👍🏻👏🏻

[@lizoncarz1245]

Instead of servo can we use a bldc motor

[@hashincludeelectronics]

Yes you can 👍🏻👏🏻

[@sureshsurange9388]

Can you make different channels outputs for rc plane

[@hashincludeelectronics]

You can use the same setup for RC planes . It’s like you have to use servos and bldc motor . 👍🏻👏🏻

[@sureshsurange9388]

@@hashincludeelectronics no I meant that can you show how to make different channel output as in other commercial recievers.

[@shadowfighter7085]

Can i use this with arduino uno instead of nano

[@hashincludeelectronics]

Yes you can 👍🏻👏🏻

[@shadowfighter7085]

@@hashincludeelectronics hii bro Why are you not doing any projects it's been one year you posted videos

[@hashincludeelectronics]

@@shadowfighter7085 I will be back with videos soon . Currently occupied with some other stuff . But stay tuned 👍🏻👏🏻

[@habashkt1483]

Can use push Botten insted of joystick?

[@hashincludeelectronics]

Yes you can use . However we are already using push buttons in this project . Joysticks are used for different purpose that it to add some analog control .

[@rogelkimuelr.4473]

is it ok if the transmitter port available is com9 only? while the receiver port is com8?

[@hashincludeelectronics]

Yes that’s fine . 👍🏻🙏

[@rogelkimuelr.4473]

@@hashincludeelectronics hello, follow up question, is it ok to use variable regulated ps instead of using buck converter?

[@hashincludeelectronics]

@@rogelkimuelr.4473 yes you can . However make sure it provides 5v output at receiver . 👍🏻👏🏻

[@maheshkudale5318]

सर, क्या एक लॉरा मोडूल रिसिव्हर और ट्रान्समीटर दोनो काम एकसाथ कर सक्ता हैं ?

[@hashincludeelectronics]

Yes it can do . This module can act as transmitter and receiver . But it can receive or transmit data at a time

[@Shamoonkhan72]

Hello, Thanks for uploading such a good video but I want to ask that if, I want to replace the joystick with any other components like toggle switch or any normal button , so it will work or not. I know that you already add some buttons but I am asking just for information, i want to make this transmitter. Thank you I hope you will reply

[@hashincludeelectronics]

Yes you can add that . However you will have to read the button state as digital read same as other buttons.

[@rcjet5400]

Which arduino nano module should I buy, I mean there are many nano boards with different sram, cpu flash memory

[@hashincludeelectronics]

You can buy any Arduino nano board 👍🏻

[@subhadipghanta09]

for circuit design, what software is best ? free

[@hashincludeelectronics]

I use fritzing 👍🏻👏🏻

[@subhadipghanta09]

@@hashincludeelectronics but how can i add nrf24L01 adapter module ?

[@manjiro-g1c]

Thanks bhaaiii

[@hashincludeelectronics]

You are welcome 🙏

[@NLOLegion]

Здравствуйте, а с обратной связью? - чтобы приемник мог передавать данные на передатчик? Сложно такое сделать? К примеру - датчик движения будет на приемнике зажигать лампочку на передатчике.

[@jubayerhossain8694]

Sir Please using esp32...

[@hashincludeelectronics]

with esp32 you will not get that long range . And actually there is video on my channel "Parallel Parking Car" where I have created transmitter using joystick+esp32 and receiver+esp32. You can take a look at that. You can add more channels to it.

[@jubayerhossain8694]

Thank you sir.....❣️

[@jubayerhossain8694]

Parking car is only 2 channel transmitter and receiver but in this transmitter and receiver 10 channel so how to make a 10 channel transmitter and receiver using esp32..?

[@hashincludeelectronics]

@@jubayerhossain8694 just add those new channels variables in the sending data structure . Check how the 2 channels are used .

[@jubayerhossain8694]

Thank you sir .....🤍

[@akashpramanick9914]

Potentiometer value? 5k/10k??

[@hashincludeelectronics]

You can use 10k 👏🏻👍🏻

[@naveenk4792]

WHAT HAPPENS WE SEND TWO SIGNALS AT A SAME TIME THROUGH nrf24l01 ?????????

[@hashincludeelectronics]

Not sure if we can send 2 signals at the same time from same transmitter . Please check nrf24l01 sheet 👍🏻👏🏻

[@bebashambatan6903]

Sir, have you made it for 2 way communication?

[@hashincludeelectronics]

It’s one way communication 👍🏻👏🏻

[@orange_tweleve]

Hi nice video , I'm kinda curious why did you used a nrf24l01+ PLA + LNA module for the reciever instead of just a base module nrf24l01, does it have to do anything with more precise control and noise reduction ? I'm curious about it cuz you usually use that module if you want to transmit information back to the transmitter.

[@hashincludeelectronics]

This module has better range with antenna . So I used it . It will be very useful while making drone or plane projects.

[@orange_tweleve]

@@hashincludeelectronics oh that makes sense , plus I believe the antenna would be better off at picking signals compared to the pcb antenna on the module I used.

[@hashincludeelectronics]

@@orange_tweleve exactly 👍🏻

[@TechnoShuvo360]

What is its range?

[@hashincludeelectronics]

Theoretically it can go up to 1 km . But I haven’t got chance to test that full range . But with antenna the range is awesome 👏🏻

[@TechnoShuvo360]

@@hashincludeelectronics Thanks

[@pascalvonrotz6555]

@@hashincludeelectronics how far did you Test it jet

[@yogeshjangra3973]

Please tell the potentiometer reading.

[@hashincludeelectronics]

You can use 10k 👍🏻👏🏻

[@newthinkofficial]

Can I use on/off switches at the place of push buttons?

[@hashincludeelectronics]

Yes you can

[@newthinkofficial]

@@hashincludeelectronicshow much ( k potentiometer) you have used in this video?

[@hashincludeelectronics]

@@newthinkofficial it’s 10k

[@xrphobby1341]

Hello how is possible to connect wirelessly the pins of MAX7219 (CLK, CS, DIN) to Arduino pins? So that there's no more physical wires that connects between MAX7219 and Arduino. Thank you.

[@hashincludeelectronics]

Unfortunately I am not sure about this module 👍🏻

[@yash-hy8gr]

Kya hum 2 push button ki jagah toggle switch use kar sakte hai

[@hashincludeelectronics]

Yes you can 👍🏻👏🏻

[@yash-hy8gr]

​Thanks for answering

[@yash-hy8gr]

Bhai kya hum is transmitter ko scale vehicle me use kar sakte hai kya

[@hashincludeelectronics]

@@yash-hy8gr what is scale vehicle? If it’s a remote car then you can use this transmitter receiver 👍🏻👏🏻

[@yash-hy8gr]

Yes yes it's rc car means mini model of original vehicle

[@narenpai]

I got the code to work, but Now I am having the problem that as soon as I plug the servo in, the connection no longer works

[@hashincludeelectronics]

Which power source are you using at receiver ?

[@narenpai]

@@hashincludeelectronics I am using a wall outlet that supplies steady 5volts through USB port. It is not a adapter, it is a directly installed USB port

[@zlatkoturcic3041]

I have one more question ; can this be done with 2X Arduino pro mini MK 3.3V or 5V, or a combination with Arduino NANO and Arduino Pro mini (SparkFun) and do these codes of yours match? Zlatko Turčić (Croatia)

[@hashincludeelectronics]

If all pins are available then I believe the code should work . I did not try Arduino pro mini but you can give it a shot .

[@sulavshrestha8687]

Its like we need to connect differently than universal receivers can u do with 3 pin

[@hashincludeelectronics]

Sorry but I did not understand your question

[@sulavshrestha8687]

@@hashincludeelectronics i mean theres is light use in other channels can u do other functions rather than led

[@MegamindCreation]

what's the range bro? And can we use it for fpv planes? Video was awesome keep it up. 😊

[@hashincludeelectronics]

Thank you very much for checking out the video 👏🏻👍🏻. The range is said to be around 1km . However I did not test that much range . 👍🏻

[@MegamindCreation]

@@hashincludeelectronics can we expand it by any method to around 5km?

[@Bryan-h2w]

Hi I want to know what type of potensiometer do you use in transmitter?

[@hashincludeelectronics]

It’s 10k potentiometer 👍🏻👏🏻

[@Bryan-h2w]

@@hashincludeelectronics thank you ❤️🙏

[@hashincludeelectronics]

@@Bryan-h2w welcome 🙏

[@Bryan-h2w]

Bro i have another question How many watts of 220 ohm resistance did you use?

[@hashincludeelectronics]

@@Bryan-h2w just use any 220 ohm 👍🏻👏🏻

[@Allah_Is_The_creater]

I did everything the exact same and it keep showing me no signal in serial monitor 😢 please answer me 😢

[@hashincludeelectronics]

Please use rechargeable battery . Also make sure there are no loose connections . Also use nrf adapter only . Check video for any missing step again . 👏🏻👍🏻

[@yash-hy8gr]

Bro what for we use UBEC

[@hashincludeelectronics]

It’s kind of step down voltage converter . We need it to provide good 5v power supply to servo motors 👍🏻👏🏻

[@baybadki]

Hi , I have used Uno as transmitter and nano as receiver. But nothing shows up on the serial monitor even though im using rechargeable batteries. Please help as the serial monitor remains blank

[@hashincludeelectronics]

Are you using NRF adapter ?

[@marscreation.s]

How to bind transmitter and receiver

[@hashincludeelectronics]

Please check the video for the information you need 👍🏻👏🏻

[@yash-hy8gr]

Kya hum is Transmitter ko scale vehicle me use kar samte hai

[@hashincludeelectronics]

Not sure what is scale vehicle 👍🏻👏🏻

[@yash-hy8gr]

Means mini model of original vehicle

[@yash-hy8gr]

Bro I want to use it in mini model of TATA 4925 truck

[@GuilhermedaSilvaCaetano0095]

i have a question, how much meters this transmitter and receiver can stay conected?

[@hashincludeelectronics]

Thanks for checking out the video 👏🏻👍🏻. It is said that it can go upto 1km. Give it a try 👍🏻

[@indianaiscience3670]

can you add dc motor , motor control with a joystick (robotic car )

[@hashincludeelectronics]

You can easily add it . Check my other video on rc car using nrf24l01+ module for reference

[@xrphobby1341]

Thanks for your video, how is it possible to send data from 3pins of 74HC165 (Load input pin#1, Clock pin#2 and Output pin#9) to multiple arduino boards? Thank you

[@hashincludeelectronics]

Unfortunately I don’t have idea about this module you said .

[@xrphobby1341]

Thank you, it's a Shift register that I used to expand inputs of arduino to have more push buttons. I thought instead of connecting the 3pins of Shift register using wires to arduino pins, would be great if it is done wireless with NRF24L01 module.

[@Md7riyazz]

Bro i have one nano only iam use nodemcu instead of another nano pls reply quick i have exibition

[@Falcon_X1]

i dont think that works.. but try it... if you have 2 nodemcu , then check other videos in YT

[@Writertrueline04short]

Transmiter and receiver ki jagah par Lora 3:34 module transmitter and receiver Ka use kar Ke ak video banao bade bhaiya

[@hashincludeelectronics]

Sure will try 👍🏻👏🏻

[@hamadabob3823]

Is there is a different if I chose the nrf module vs nrf +antenna I mean the code is the same or change

[@hashincludeelectronics]

Yup it’s same . No change in code 👍🏻

[@nikolatesla892]

Can I make it with Arduino pro mini?

[@hashincludeelectronics]

Unfortunately I have not used Arduino mini . If all required pins are available then give it a try . Else use Arduino nano or Uno .

[@sanjeewakumara2755]

Can i control brushless motors from this transmiter and receiver

[@hashincludeelectronics]

Yes you can . You can use any of these servo channels . 👏🏻👍🏻

[@SampaBarman-rj1go]

Can i add trogle switch in this

[@hashincludeelectronics]

Yes you can add 👍🏻

[@SampaBarman-rj1go]

@@hashincludeelectronics thanks.. sir

[@surajkanojiya5943]

Is there any chance or way of extending the range of the transmitter and receiver?

[@hashincludeelectronics]

It is said that the range can go upto 1km . If you need additional range then please check for other module which can provide that much range . How much range do you need ? And for what purpose ?

[@surajkanojiya5943]

@@hashincludeelectronics I need at least 5km range for my project purpose.

[@Falcon_X1]

@@surajkanojiya5943 Most people say that antennas like clover leaf and Yagi can provide these range. However, you need to make it yourself (I mean test it yourself) and sometimes, it will have power issues or any other things.... But try it.....

[@nishantnimmana5903]

What is its max range ?

[@hashincludeelectronics]

It is said that it’s around 1km . However I have not tried that. 👍🏻👏🏻

[@jsjsjdjdj4400]

Hope that your code work if we try it!

[@hashincludeelectronics]

Yes it will . All the best 👍🏻

[@minazyoutubechanel8057]

vaiya, receiver er 2 pas theke 2ta pic diba, (servo motor gular wire guja j connet hoice oi jwgata clear na)

[@noiceman_but_yt4725]

I have nrf module without the antenna will it work ?

[@hashincludeelectronics]

Yes it will 👍🏻👏🏻

[@noiceman_but_yt4725]

@@hashincludeelectronics also I m thinking of making rc boat using this , and the module will be really deep in boat , will the receiver get signal from it ?

[@noiceman_but_yt4725]

@@hashincludeelectronics also is giving the power thing for module important?