HAYABUSA Handlebar Riser Kit Intallation

4cm rise from stock.
Available on Ebay.

[@hmroa3056]

It was an easy install for me as well. The only suggestion I have for the manufacturer is to provide 9cm bolts instead of 10cm. I found that the longer bolts protruded too much at the bottom, for my taste.

[@maidenstrat1]

Done mine and found the bolts were too long, kept hitting the frame(two of them) had to remove and cut them down a bit. Sorted now and a more comfortable ride as you say. Happy riding peeps...

[@Thelonewolf1154]

I noticed in the video, the front 2 bolts appeared to be too long.....I'm glad you were able to correct !!! Now, I'm wondering will it work on 2020 HayaBusa????

[@maidenstrat1]

@@Thelonewolf1154 cant see why I won't really... long as the spacer fits the frame correctly you should be fine. Made a better riding position for me too

[@MrEliteVideo]

I'm willing to see the before and after seating in the riding position...

[@MayorofDipshittery-lq7if]

Why do all these guys insist on wearing gloves ? Not even mechanic gloves. Use your hands you muppets. Looks decent riser though 👍

[@huwaali7759]

Nice video I tried looking for the 40mm but they only have the 33mm,do you have a link for ebay for the 40mm Cheers

[@BigDogRidgeback]

you should of used a lock pick for the chrome caps.

[@VR.VanderleiReis]

Excelente trabalho. Parabéns! Very good (By Brazil)!!!!

[@emnhw1comcastnet]

I know you say eBay, but what exact wording am I looking for? Thanks again! What other mods have you done to this bike to make it more comfortable?

[@Adikxx]

"Hayabusa 40mm bar riser" Higher screen and lowering footpegs. All available on Ebay.

[@trovadorramos3764]

Very nice riser...still have the agressive bars..

[@ahickin]

Hi mate 😊 u done a video on the osbe tornado helmet last year. Do u know where i can buy one please.

[@titol34]

thanks for this video . useful :-)

[@goodboyringo9716]

Why do you need gloves for that job? Those bolts look to long.

[@brianmathew09]

any other complaints? ..dial 1- ARGOFURSELF

[@zzzpip]

hi, good video. did it affect your fast idle/choke cable when turning bars

[@pmp6972]

Damn right that height would affect cables. I put on a set of helibars that gave me 1/2 inch in height and I had to re-route my choke cable. Even with that if the bars are completely to the right the choke is ever so slightly engaged. I look forward to the answer. I’d like to see the installation on a stock untouched bike then without edit see the bike run and taken for a ride without touching the cables. Excuse the skepticism and no offence intended sir but this view is based on a much lower rise and it once again affected my cables.

[@markdelichte5401]

Was thinking about doing mine I enjoyed your video it will probably handle different. Not sure if I should Not sure if I should

[@Adikxx]

Bike will handle exactly the same as you are not changing anything that affects handling such as tires, shock or forks. Nor you're changing bikes weight or wheelbase). It will just be a little more comfortable.

[@jsully4074]

why cant i watch this damn video?? it keeps stopping only like 30 seconds into it....FML

[@gerrygarcia1940]

Quick question my busa 2002 model .. the gauge was all ok including ligths, once i start engine never move once you reb and also dealer none, usually you switch on the ignation totally move all the arrows, check, mine zero . Any ideas ? Thanks and waitng your answer.... Greetings from phillipines

[@mag4208]

Lol Ull wait forever

[@djavankoolemansbeijnen349]

You want scratches, thats how you get scratches..

[@PelukaUSA]

where I can buy the riser, from USA

[@R3RLEE]

Good vid!

[@BobBerardjr772]

Does 1.5 inches make a difference? Not being wise. Just a question. Thanks guys

[@Adikxx]

Bob Berard jr massive difference. 2 hours in the saddle and it becomes collosal! Well recommended (if you long distance tour )

[@maidenstrat1]

Can you get 40mms extension for a 2014 hayabusa ? As I've looked around and can only get 10mms to 27mms if I'm correct. Would the kit you used in this video grit my 2014 model?

[@Adikxx]

Hi bud, gen 1 kit won't fit gen 2 as the yokes are different but there are 40mm risers for gen 2.

[@maidenstrat1]

@@Adikxx hi thanks for your swift reply, I've managed to locate a 35mm riser so far. Great video very good explanation. Thanks

[@Adikxx]

@@maidenstrat1 Brilliant. Happy that the vid was useful. Regards!

[@bradplowman3271]

How much of a pain is it to get the key in now? Looks like it would be a bit of a hassle. Thanks

[@Adikxx]

Brad Plowman it's not bad. In fact no pain at all.

[@LINKchris87]

Does it make it much more difficult to see the speedo, tac and rest of the display?

[@TheFujac]

i have this kit on my 2002 and no, it doesn't....

[@LINKchris87]

@@TheFujac Thanks a lot. I'm used to the original position but any comfort upgrade is welcome

[@giannibigliardi5342]

Grazie del video moto utile

[@BobBerardjr772]

Thank you buddy..

[@hectorquiles488]

Were i can buy the kit

[@Adikxx]

Ebay

[@vaibhav1.9]

Where you can buy it..??

[@Adikxx]

Ebay

[@jt3d867]

What about the master cylinders getting caught in the windscreen?

[@Adikxx]

JT3D you move it slightly further inwards and rotate it down a bit. It's just a matter of quick adjustments.

[@jt3d867]

adikxx83 thanks for your help

[@craigwheaton2506]

What was riding it like afterwards ?

[@Adikxx]

Craig Wheaton brilliant. Massive difference. Previously 45 minutes until wrist pain set in. Now wrist fatigue comes a lot later and isn't that nasty as before.

[@jackthomson5618]

Could you give me the company where you buy them

[@Adikxx]

Ebay

[@jackthomson5618]

I am in Australia and they are not available here ,so must be a American Company, if you could give me there name it would be appreciated

[@Adikxx]

@@jackthomson5618 www.ebay.co.uk/itm/Suzuki-GSXR-Hayabusa-1999-to-2007-33mm-Bar-Riser-Kit-Grab-A-Bargain-RRP-99-99-/223398607857?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0

[@jackthomson5618]

My Hayabusa is a Generation 2 Model 2016

[@Adikxx]

@@jackthomson5618 www.ebay.co.uk/itm/Suzuki-GSXR-1300-Hayabusa-2008-33mm-Bar-Riser-Kit-Grab-A-Bargain-RRP-99-99-/223058945978?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0

[@michael2642]

On peut acheter ou?

[@Adikxx]

je l'ai acheté sur Ebay au Royaume-Uni

[@michael2642]

@@Adikxx Ok merci !