JBL PARTYBOX 310 COMPLETE TEARDOWN !!!

[@Paul-gu2lv]

I gained more respect for the value of the speaker seeing just how many quality parts it consists of. Thanks for the time and effort.

[@EwertonDeMalta]

Onde encontro esse alto falante para comprar?

[@ivanjerez2417]

Nobody ever has done a video like this. Thank you for making possible dude.

[@devilbats1874]

I have to say that the built quality is superb

[@LegendaryMaoMao20]

I've been waiting for years for a proper teardown video of my favorite party box, and I'm very happy to say that you're finally the one!!! The 710 is up next!!

[@SL-qf7sr]

You dismantle everything, I hope fixing it would not be a problem. You are great

[@GeovaneRMelo]

Incrível a qualidade da construção da JBL, olhando de fora nem parece que tem tantos parafusos.

[@HBV90]

eu concordei

[@jbatista338]

me salvou,finalmente um vídeo internacional mas bem explicativo pra abrir a partybox 310

[@nolanwyatt5337]

the cinematic camera work and audio ballance is really well done

[@cleitoncicero5280]

Amigo seu vídeo me fez dar mais valor a minha partybox 310. Parabéns JBL pelo projeto fantástico.

[@Anocsi]

Great job, amazing, nobody ever has done such a professional teardown of this speaker, keep it up!

[@HBV90]

Yes, the speaker is reassemble back together for future use. It's easier to put it back together than taking it apart, so it normally takes 2/5 of the time tearing it down.

[@calyxl43]

​@@HBV90do you ask jbl for a speaker to do this or just spend your money on it?

[@HBV90]

@@calyxl43 It would be amazing if JBL provides me with the speaker, but unfortunetly it's out of my pocket.

[@Chris-yy7qc]

Amazing there is a wooden speaker enclosure inside. On the other hand this makes perfect sense, as wood has got the best acoustic properties for a speaker case.

[@Dj-Jon-E-C]

I agree good to see that

[@computerfreak696]

Only sad to see it is cheap wood with lots of air between the wood fibers. Not the best wood to use for a speaker. The cabinet was better if it was made out of mdf or multiplex.

[@Chris-yy7qc]

@@computerfreak696 Youre right. This was done for cost cutting I guess.

[@EACleDel]

You're the best man! Hope you can tear dawn the PARTY 710, that would be amazing! Greetings from México!

[@Musicloverpartybox]

Nunca imagine toda esa ingenieria en esta bocina, yo tengo 2 y creo que nunca me qnimare a destapar alguna ta que es un trabajo muy pero muy delicado y admiro tu valor por hacerlo

[@flopro7332]

JIN , what a great video, I've got one suggestion a lot of people are denting/bending the grill of the 310 including me, it would be a video that would interest a lot of us , how to get the grill out to straightened it. Thank you .

[@juan78501]

Bravo! Video will be useful in case the battery needs to be swapped out or any other components for that matter.

[@sezgindemirtas6978]

Next 710 bro🎉🎉🎉🎉

[@Chris-yy7qc]

Ultimate!

[@user-Sergei_]

710

[@jenspermadi]

UP

[@Chris-yy7qc]

@@user-Sergei_ Ultimate!

[@gageb556]

and the 1000 and the ultimate!

[@sachinshah481]

Yes iam also waiting for jbl710 . To much efforts you spend in your video 👍🏻

[@macK869]

wow complete and proper teardown of the beast speaker

[@adriangoyachallenges4739]

Muchísimas gracias por desmontar el altavoz y así poder conocer más mi altavoz. Un suscriptor nuevo.

[@zodiacfml]

good job. I wonder how reliable this product is, the number of parts is staggering.

[@robinbanda1723]

I own one. Dropped it out of the box by accident on its wheels and it survived.

[@tylerrodgers1693]

ive had my jbl party box for almost years now and everything still works amazingly when i saw the size of the battery i was shocked because i can use it for a good 3-5 days playing music at 30-40 percent in my house with the lights on and bass boost set to deep its a great speaker

[@tylerrodgers1693]

almost 3 years*

[@fahada5i]

great video. any idea where the fuse is?

[@davidsonkojo4190]

Careful tear down. Love it 💯

[@Lockeyofc2024]

Super bruh, you don't find partybox teardown of this quality on youtube

[@mattt0323]

this is hard work man. You've earned my respect and a sub!

[@HBV90]

@@mattt0323 thank you!

[@dannydanutzu1]

Great Video!!🎉🎉 please let me know if changing battery only how many steps to be performed, or how many plastic covers to bring down

[@satishmalik2005]

Good work buddy, very detailed video . A big thumps up for your efforts..

[@nyashax-factormuchemwa239]

Thank you for the very clear tear down video. It helped a lot wanted to cgange my battery

[@VictorHugoMamaniApaza-my8nn]

Hola sabes cual es el costo de la bateria ??

[@borjafeal9825]

Very nice work. Perfect Words and Perfect Video. Thank you and congratulations.

[@BalabantaNaik-y4g]

Very nice teardown and well explained with details ❤❤❤❤

[@michaelmuhammad8372]

Thank you so much!!! Can you please list the details of the Battery and/or where I can buy a replacement Battery. Thank you once again, from one Technician to another!!!

[@ultrongaming1177]

Your hard work 😍😍 Keep it up bro ☺️☺️

[@geovasy2976]

Very great video, thank you for your work.

[@higuys1157]

yes bro that is a real teardown thank you

[@cubajablonski122]

yo bro i got a question for you what do with the speakers after this

[@FeelingENTITLED]

So, what makes it more sound bassy than any other speaker out in the market? Does the foam inside that tight cabinet contribute to its rich sound? Please explain more. Thanks by the way though. I am looking for this type of content, to uncover the magic behind this powerful portable speaker.

[@Bard_Emancipovani]

Great video, excellent job! Can this front grille be completely detached? In a few places (mostly in the corners that are covered here), the grille has dented, and there are quite a few scratches. I was thinking of removing it entirely, fixing the dents, and repainting it. Do you think that's possible?

[@georgeduanejr]

Nice video guys. Thank you. I just got my 310 and love it

[@HBV90]

Yea the 310 is pretty nice!

[@ReasonRaider]

It will always amaze me how optimized speakers have become for power usage 😮.

[@Thomas-tf4cm]

Yes, it's really interesting! Also DSP, and active filtering.

[@bpp562]

Cool video, I just bought one. Next you need to disassemble that smoke detector😁

[@amorporlamusica1351]

Ayer estaba buscando este video en tu canal haber di ya lo habis hecho y sorpresa salio hoy genial 👌🏻

[@theresilientsurvivor1892]

Great job! I thought there was a subwoofer in the bottom. Only 2 small woofers!!!

[@PikeRoadFan]

Have you updated your 310 to the new firmware 1.55.0? I’ve only had mine for 3 weeks and am curious what the reason/expectation for the update was?

[@SilvioLima-hp6pi]

Excelente parabéns muito top esses vídeos 🔊👏🏼👏🏼👏🏼👏🏼

[@TheAntirossi]

Very good high quality components , JBL number one ❤

[@jeevansatav]

It's the Best Party Speakers which i ever heard.

[@mikeeshim]

I wonder if, now knowing where the battery is, if I can cut out a square on the back plastic where the battery is and make that battery swappable? That is my only gripe about the PB310, and heavily contemplating upgrading to the PB320 just for the swappable battery.

[@HBV90]

That is definitely doable.

[@Rony4491]

Hello, thanks for it ! What about the handle bar ? How to disassemble it ? Mine is Bent, I must disassemble it and fix it.

[@arkangell770]

710 is good but do you think you can make the ultimate ? 🎉

[@flump2468]

Thank you. Mine got a bit wet and now doesn’t work. So with your video I’m going to do a strip down

[@E2Grunt]

Mine did the same. Did you figure it out

[@flump2468]

@@E2Grunt Yes bought two new circuit boards from Ali express. I think they were around £70 Looked to be totally genuine ones and it’s now working perfectly

[@mitotv6376]

Nice teardown

[@ChloeSotolongo]

Hey? Can you do the Onn. Large party speaker next?

[@macbrebonicks8668]

I want to see mods and repairs on these types of speakers.

[@VikashKumar-xx1mw]

Very hard working

[@RavivarmanRVJEFF]

Detail teardown!! thanks brooo👍👍

[@rahulcreativity013]

Next video jbl 710 teardown. Please bro. 😄

[@HBV90]

Yes, definitely!

[@mannixpl]

Good work! I hope you managed to screw the speaker back in?

[@AkashdeepSingh-gf4xc]

Please make teardown video of sony xv900 and also another sony speaker 😊

[@felipesoares3590]

Top trás a 710 🔥🔥🔥

[@d-dayyt8470]

You should do a teardown of the JBL PartyBox 710 😮

[@SandunSuranga]

Thank you very much, you're really amazing!.

[@HBV90]

Thank you!

[@provincialcityboy8485]

I can't believe how the jbl made the battery so small that last....

[@franciscusdemeulemeester5945]

Can you do the tuner xl please

[@treal512]

320 seems to be different. Not sure where to start on this thing

[@ShamiTech424]

Can you teardown jbl xtreme 2

[@LAP-DESK_GAMING]

That air vent on the back. Is it open on the inside or it have some protection like a fibre or metal grill. Please reply.

[@yerkint]

I updated the firmware to version 1.55 and the sound disappeared, the battery indicator does not show. Resetting didn't help. How to return old firmware?

[@HBV90]

this this what you tried? Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.

[@nantechsupport]

What happen when battery is not working anymore? Can I continue using this Partybox 310 tru direct AC?

[@pulasthimarawanagoda]

Yes

[@graysonhardy2139]

Hey bro please consider disassembling one of the new JBL Authentic speakers. They’re intriguing and gorgeous 😁👍🏻

[@thecyborg6718]

They dont glued that spongy to the inner wals of the speaker?

[@WillianBalman]

Dude, did you notice if you can remove the front metal plate? Mine has some rust stains and I want to paint it

[@KizitoPaul-s7u]

Hi bro nice work the 310 party box i have when you remove ac cable it doesn't power on to power on you have to disconnect the battery what is da problem

[@gageagamer4966]

I own one of these and I wonder what the hole on the back that blows out wind to the bass is

[@אסףליברמן-ת4ל]

The spiker will work if i take the battery out and connect it to the cabel?

[@d.hulsman3553]

Are you ever planning on doing a JBL pulse speaker?

[@HBV90]

It's on my list of recommendations to do.

[@winstontalaman6363]

What kind of wood box did the JBL used to their speak box? I badly want to know.

[@madmanm7633]

PLEASE DO A 1000. I have one that has been smashed and you are my only hope for an actual guide

[@imviveksangwan]

What was the cabinet made up of?

[@HBV90]

wood lol

[@Regalert]

Is that battery lithium?

[@ThauãBrunetti]

depois de desmontada deu quantos parafusos?

[@SauliusJ29]

Amazing Brother Big Big Thumbs Up from Lithuania 🇱🇹 like i sayed you are amazing at this job 💪🏻💪🏻💪🏻

[@macbrebonicks8668]

Can the battery be replaced afterwards?

[@HBV90]

battery is definitely replaceable.

[@victorgutierrez5826]

what is your advice if I can add two MIDS speakers to 310 after opening or two tweeters more?

[@dino-cute8083]

hello sir, may i ask how's the condition of ur JBL GO3... is the rubber paddings and also the JBL logo in the front is still intact? and how about the battery sir is still doing well?

[@HBV90]

My jbl go 3 is still working good and the physical condition of it still looks brand new. I have a clip 4 which was rarely use and has been in storage and the rubber backing is already peeling off for no reason.

[@dino-cute8083]

@@HBV90 thank you so much for answering my questions sir. by the way i already bought my new Go3 because of your content but im worried about the physical appearance i want it to preserve the appearance of my Go3 because here in Philippines we have extreme heat causing my BOSE earbuds start cracking... by the way thank you again sir Godbless😊

[@aniket1047]

Amazing and appreciate your hardwork😊

[@HBV90]

Thank you!

[@aniket1047]

@@HBV90 welcome

[@doodskie999]

Bro I have something rattling inside my 310, I didnt drop it or anything. Sounds like a loose screw or rock. Though its impossible for a rock to go inside as the air box exhaust is pointed upwards. Any idea or encounters about this?

[@STAN_MAN94]

Can i upgrade the battery on this and where would i find an upgrade or even an replacement?

[@bassblaster505]

missed the opportunity to show that the amplifiers on the main PCB were. Im guessing TPA3116D2's, as the 8 output filtering coils show its a bi-amp design, meaning the woofers and tweeters have there own amplifier

[@skylerposton_EDP_Photo]

Are there any screws

[@HBV90]

Many..

[@monomoynandi]

Teardown JBL ultimate with show amplifier ic 🎉

[@bigbadaboomboom]

Is that a smoke alarm flat battery alert? In the background? I wouldn't even have posted s video like this if it is. Also, is that screwdriver all you need to disassemble it and can you get spare parts?

[@valquimart]

Amazing!! Perfect.

[@david029014]

How do you take off wheels?

[@HBV90]

You have to use a wrench on both wheel to loosen it.

[@david029014]

@@HBV90 got it, I had a hard time popping the covers off

[@Ton618__]

where is amplifier ?

[@janantons6930]

Hy! The Battery in your Fire Alarm are almost empty 👋🏼 Nice Video, interessting how this Monster Looks inside

[@HBV90]

Yes it is..it's has since been replaced. Thanks!

[@janantons6930]

@@HBV90 👋🏼 first i paused several Times the Video because i thought it was my Alarm 😆 Thanks for the Video, its total cool that you make auch Content

[@locoocho2415]

Awesome excellent job 👍 can you pair with a Samsung Galaxy phone s10, and above? Do the lights work with old skool Black Sabbath my music. How to charge the 310 ?

[@cvishnuvardhanreddy8500]

🤜🤛nice work bro thankyou🙏

[@nelsonty7650]

can I use a JBL 300 battery as replacement? my battery turned bad

[@DerickWrl-dh4ir]

Love all your videos ❤️

[@HBV90]

Glad you like them!

[@Speakerpro7435]

Can u teardown rave Neo 2

[@hyuseinhyusein367]

710 bro plis