Dig the video Brian great shots perfect transition great explanations.. Thanks for sharing brother..👍🤙
@BriansRCStuff Жыл бұрын
Thanks man, I try to do some editing to keep it a bit shorter so I have time for my long winded explanations! : )
@rush338 Жыл бұрын
How can this engine handle going above 50000 RPM?
@BriansRCStuff Жыл бұрын
The kv rating is unloaded. I don’t know the rpm it is at under load but probably isn’t much above 50,000. Also, the batteries will have voltage sag under high load. So the 12.6v quickly become high 11v range or possibly lower like mid 11v. I wish I knew the actual rom though.
@rush338 Жыл бұрын
@@BriansRCStuff I understand, my friend has a 5900kv motor to run in 3s with a 45 amp esc, what do you think?
@BriansRCStuff Жыл бұрын
@@rush338 I think that may be pushing a 45 amp hard! If I remember right the motor can pull over 60A! Edit - 88 amps according to the manufacturer. www.amazon.com/KingVal-Replacement-2845-5900KV-3-175mm/dp/B0BGHZWHZ9 I guess my HBX truck is fairly light which helps.
@dimamariankov19296 ай бұрын
Question: will i get the same speed with Surpaass Hobby 2838 6200kv ?
@BriansRCStuff6 ай бұрын
That motor should make less torque, but spin faster… So it should be pretty close I would think but it’s hard to say for sure. It probably will run even hotter, however. I would definitely get a heat sink/cooling fan combination if you’re gonna run that or even the combination I’m running. Surpass hobby makes a really nice one! I just haven’t been able to test it to make sure it fits.
@dustinrossi93844 ай бұрын
Can i put that motor in say a slash with same resluts ?
@BriansRCStuff4 ай бұрын
The slash weighs a lot, I would go with a bigger motor and ESC…. Like in my Traxxas Bandit videos. That combo is too small!
@xXDiVeRSeCHaoSXx Жыл бұрын
Did you change the dif gears or is this the metal
@BriansRCStuff Жыл бұрын
The gears are 100% stock other than the pinion (same as stock but the grub screw was stripped on the stock on so I had to get a new one). Yes they are metal.👍. kzbin.info/www/bejne/eJaWfpyEdrtrn7s
@Rcfunkykev3008 Жыл бұрын
Dam man 3s on a little car like that cool car
@BriansRCStuff Жыл бұрын
Little monster for sure!
@IowaBudgetRCBashers Жыл бұрын
What a little ripper
@BriansRCStuff Жыл бұрын
Thanks!
@c.k.hobbyshop3351 Жыл бұрын
Very cool 😎
@BriansRCStuff Жыл бұрын
Thanks for checking it out!
@treb1395 Жыл бұрын
i want to convert mine too but i don't know how
@BriansRCStuff Жыл бұрын
No worries, I got you! kzbin.info/www/bejne/jWGQkKKXr5xgmaM I have a ton of videos on this car. Take a look over that video and if you need any additional help, just let me know. I will say it is more practical with the stock setup but it is fun in a silly way how I have it set up.... quick for sure!
@treb1395 Жыл бұрын
@@BriansRCStuff thank you very much, more power and more sub on your channel
@BriansRCStuff Жыл бұрын
@@treb1395 thanks!
@wadeskelton7585 Жыл бұрын
Get it!!!!
@BriansRCStuff Жыл бұрын
LMAO!!! Hell yeah!
@inhhung16435 ай бұрын
Động cơ 2845 5900kv có gặp sự cố gì khi gắn với ESC 60A
@BriansRCStuff5 ай бұрын
Sorry, I am not getting a translate option. What language is this?
@inhhung16435 ай бұрын
@@BriansRCStuff Does the 2845 5900kv brushless motor have problems when attached to a 60A ESC?
@BriansRCStuff5 ай бұрын
@@inhhung1643 I had no issues at all with my 60A HW ESC. The motor will get hot before the ESC does and especially when warm out you will need to give that motor a chance to cool off every several minutes. I was considering running the Surpass Hobby cooling fan setup but never got around to it.
@BriansRCStuff5 ай бұрын
@@inhhung1643 I would run a lower KV set up if you plan on doing general running on 3S. The 5900kv is best for just for a few minutes of quick speed running and it drains 850 mAh LIPOs quickly.
@inhhung16435 ай бұрын
@@BriansRCStuff If using 2s and 3s together, how many kV motor and how many A ESC should be used?
@Neelis23 Жыл бұрын
Nice that you are giving this little truck some well deserved screen time and online attention, its a great truck :)
@BriansRCStuff Жыл бұрын
Thanks man, sure am. They should be sending me a 6 pack of these things for how many videos I have done.😂
@smiley37greg Жыл бұрын
Sweet little ripper
@TheThetruthmaster1Ай бұрын
Gyro bro 🎉
@BriansRCStuffАй бұрын
I have one in it now.
@TheThetruthmaster1Ай бұрын
@@BriansRCStuff what's it like now
@BriansRCStuffАй бұрын
Still a handful lol but possibly a little better. My last video with the truck had it running a gyro.