HD Ram 2500 / 3500 Bed Storage Molle Panels | Icky Concepts

Get yours: www.cjcoffroad...
Icky Concepts bed panels are a made in the USA and allow you to mount spare tires, jacks, lights, shovels, rotopax, maxtrax, tow straps and more in the bed of your truck. This also allows you to keep the floor of your bed completely free for towing and hauling with a 5th wheel or gooseneck hitch. These mounts are also made to work with bed/tent racks and even covers.
All Icky Concept Molle panels are made out of 11ga steel, laser-cut, and formed on a CNC press brake. The Icky Concepts Bulkhead Molle panel mounts securely to the bulkhead of your truck bed with zinc-plated heavy-duty rivet nuts and black oxide coated steel alloy bolts. These panels allow you to organize and carry your gear into any situation.
Fitment:
-2003-2021 Ram 2500/3500 Short Bed non ram box
-2003-2021 Ram 2500/3500 (this leaves room for a tool box or a retractable tonneau cover.
-2003-2017 Ram 1500 6'4" bed, non-ram box.
#overlanding #ram #cjcoffroad

[@CJCOffRoad]

Want some? www.cjcoffroad.com/collections/bed-wall-mounts

[@gadsdenconsulting7126]

I truly appreciate you guys. I have yet to spend a penny with your business, but you've offered help every time I've asked. And promoting American Made stuff is top notch!!

[@CJCOffRoad]

We’re here to help and expect nothing in return! We love these trucks and enjoy helping other people with them!

[@precisionmarksmanshiphq773]

Gottdang it....Now I gotta work more overtime! Awesome looking product...I think I'll start with the bulkhead one for my HiLift jack and shovel/maxtrax

[@joshfelten2597]

The bulkhead panel is my favorite to be honest! So much room for activities!!

[@treasem.9230]

Ah! was wondering if I could mount a floor jack onto the molle panel. Thank you for this! Great setup

[@sofianelaoussadi6760]

Very nice product Cole

[@gunfreak565]

Well that’s just badass

[@brianm4772]

excellent channel, always interesting and innovative equipment

[@jeffb6333]

You called it out in the video. I have a Retrax cover on my 2021 RAM PW, and want to install beside molle for an axe, shovel, maybe some rotopacks. There really isn’t anything out there that’s adaptable to work with retrax. However these seem to have enough offset from the sides to a accommodate the retrax clamps, but the length will need to be cut down. Was also thinking of mounting something to work with the retrax roll up inclosure within the bed. Seems like a great place for an integrated molle panel. Any suggestions????

[@epicdaytrading]

The one person who disliked the video does not have a Ram or Ford truck lol

[@austinblevins6804]

It's because they own a Honda ridge line

[@andresrivera4965]

Man i was just looking for something like this to put a jack for my f250 keep us updated once the f250 rails come out also any possible way to lock the items?

[@AddyOverbeeke]

I was looking for a Molle Panel system but for 8ft bed... looks like only for 6.4 inch bed. My 2021 Ram 2500 is regular cab long box Tradesman Lv2 . by the way....loving the Baja Design Fog Light and S2 Reverse light kits that were an easy install. Fit and wiring comparable to OEM quality.

[@CJCOffRoad]

These work in either bed! It is the same panel though so it doesn't use the full 8 foot length on the long bed trucks. Glad you liked the other parts!

[@Mapdotnowhere]

Can you add a bag system without it being bagged from the factory (RAM 3500)?

[@gunfreak565]

Yes

[@CJCOffRoad]

Absolutely! Here's a link: www.cjcoffroad.com/collections/dodge-air-bags

[@sergz33]

Take my money!!!

[@lyndonhamby7432]

Nice 👍

[@trestonketelsen2702]

Does Carli have a long travel bag kit for the coil sprung rear 2500 in the works ?

[@JamesSmith-ep7et]

I like this option, will it work with a BAKflip installed? Doesn't look like it would. Thx!!

[@rezab5894]

Bump. I have a Bakflip G2 and the rails are clamped to the top of the bed but are butted up against the inside of the bed too. I am thinking if we drill out a bit for the bolt head to poke through the rail, the rail will then sit on the molle attachment points. This doesnt seem like too big of a gap for the top to cover. I am hesitant to buy without knowing for sure though.

[@abqcrutch]

Relatively inexpensive too!

[@1SikTA]

could this fit the 2019 Ram 1500 bed ?

[@ThatCarGuy_Mike]

Can these be made to work for Gen 1 raptor?

[@fredscherber6720]

How about a chainsaw mount

[@rvmohr]

Whats up with that jack! Where do i get one?

[@joshfelten2597]

Pro eagle!

[@rvmohr]

@@joshfelten2597 Thanks Josh.

[@irondogallen6213]

So this literally won't work in the bed of a 1500?

[@joshfelten2597]

It’ll fit 3rd and 4th get 1500’s! It fits best with the 6.4 bed but the 5’7” bed will fit it! It’s just hard to access the rear tie downs

[@scotty4773rh]

How do you keep everything from being stolen?

[@CJCOffRoad]

You can install locks on everything!

[@cambamb80]

Where is the 1500 stuff????

[@joshfelten2597]

It’ll fit 3rd and 4th gen 1500’s! It fits best with the 6’4” bet but it will fit the 5’7” bed too!

[@danrather5473]

1500 is for girls

[@HFSIR]

Will these work for a short bed 1500 2018 Ram?

[@CJCOffRoad]

They do!

[@raytard96]

So I like the design of them, but builtright did a much more streamlined, simple, and modular design than these and for half the price.... I have them in my 2500 and love them.....

[@joshfelten2597]

Buildright makes a great product. This is just another approach and it fits nearly 2 decades of trucks. And builtright doesn’t allow you to store things on that panel that stick up past your bed rail. Great design on their part, just a different approach with these.

[@tonyboneize]

First to comment 😂😂😂😂What’s up guys!!!!! Love the videos🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

[@justinclark-mo3jo]

can you mount them back words so they make more sense.

[@joshfelten2597]

Give it a shot and let me know. They are designed to be away from the bed wall

[@angelrueda925]

Could this fit a 2007 1500 ram?