Bedside MOLLE Rack Installation - 2019+ RAM 1500/2500

[@TGWraith]

HIGHLY recommend getting the 25/64 drill bit. I also used the included threaded insert tool with an impact drill, and it was super simple. Four quick trigger taps, and they were installed. Specialty tools are fun, but drill bits are only $8.

[@pisquared1366]

Great service and product! I hit a snag with the rivet nut and I wanted to point it out here. Using the bolt/nut/washer tool, what is not correctly shown in the clip is the inclusion of a flat washer after the nut and star washer. If you only have bolt/nut/star washer, the star will grab on to both the rivet nut and 1/2" nut, not allowing you to undo the bolt after you cinch the rivet nut down. The flat washer provides enough of a slip to undo it nicely. Other than that, great product

[@secondstar08]

Just installed the driver and passenger rear panels in my 2021 RAM 1500 Rebel. These instructions were really helpful--install was straightforward and easy. Many thanks for including bolts that fit the OE threaded inserts! I was planning a trip to the hardware store, and I didn't have to go!

[@hammerking9596]

Just installed driver rear and passenger rear. Great quality and looks awesome! If I did it again, I would buy the tool.

[@lincolnlawyer9704]

So funny if you look in the background and see cardboard boxes. Here a big, big tip for truck owners that’s really really cheap. Lay a big sheet of cardboard box on the box floor. I use the cardboard to pull forward when something that light or medium weight slide forward in my truck box. I have a spray box liner and trifold cover but the cardboard helps to keep the box clean and scratches free. Things don’t slide around much on the cardboard and No drilling required also super cheap! When the cardboard gets worn toss it out and replace it. Sooooo….easy.

[@adidas4275]

would love for you to do a 4th gen Ram 2500 setup.... huge range of trucks in that group from like 2009 to 2018

[@abqcrutch]

Very cool! Just bought a '21 Ram 1500 Bighorn 4x4. I love your molle storage system. I will be making a purchase soon! Thanks!

[@BuiltRightInd]

Excellent! Let us know if you have any questions that aren't answered here or on our site!

[@overlandski7795]

I wish it was a no drill set up. Why drill into my brand new truck? Why not just design a fastener that fits into the oem hole?

[@qiqi7226]

hi I have a passenger side swing case, am I still be able to install a panel behind the swing case?😊

[@xgado15]

Hey there I really want to purchase these Molle's, but before I do I need to know if this fits on a 2021 ram 1500 with the bedlights already installed.

[@JA-gb7dw]

Will a spray in bed liner interfere with the threaded insert?

[@armenzakarian4491]

So you make a panel for the front of the bed?

[@baileylouque6579]

Do you have a version with a cutout for the in bed lights or will I have to cut myself a hole.

[@KarpyDiem]

That was my first thought as soon as he showed it in the bed. ☹️

[@lykaojalao2733]

I just bought my 3500 Ram Laramie Dually 2022 You have a kits for both sides and how much?

[@monzon529]

Just ordered mine

[@txjps652]

Do you make one that will go under the toolbox to take advantage of that space?

[@merellemain5835]

So, I got to buy a spefic truck for this? or will if fit any truck?

[@hibiki54]

I have a 2022 Ram 2500 Power Wagon. You guys have something for my bed?

[@titaniummaster1532]

Trx and 1500 only????

[@metternachtjaeger9392]

I have a 2020 RAM 2500 Power wagon. Are these compatible? I have a cleat tie off above the regular tie down loop. Front and rear. There does not appear to be a way to access those or they interfere with the install? Really would like to get these for my truck. Thanks.

[@l_speed8797]

I have a 2021 Power Wagon and I'm pretty sure whoever titled this video didn't know what they were doing as there's no way the panels they show will work with our 2500 bed. The holes are in the wrong place, there are no holes at all above the wheel well and I think most 2500s, like mine, will have a 400 watt power outlet that this panel would block access to.

[@IFHSP2]

Wish these guys would answer the questions here. I have a 22 PW and wondering the same thing.

[@HFSIR]

Do they have this for previous gen trucks like the 2018 style?

[@rossrytting6641]

Any idea if you will be doing panels for the 03-08 3rd Gen Dodge short-bed?

[@teamppappi2526]

Hello i emailed you a while ago about a MOLLE panel for a 2021 dodge ram with ram box, it has the track rail inside, can the jeep wrangler panel work?

[@BuiltRightInd]

Great question. I haven’t done it myself, but I’ve heard of customers using the jeep panels as well as our universal tech plates with success. I’m not sure how much customization was required, if any.

[@djwolf37]

Any plans on a kit for a ram 3500 8ft bed?

[@richardcastellon7100]

Question, what if I have a bed liner in my truck???

[@mokimmy6457]

Can any of the panels be mounted to the back cab wall behind the back seat? I’d like to be able to maximize the space back there. Thanks!

[@321southtube]

Hey....does the Builtwhite system work with the popular swing out toolbox? I've heard interesting answers from sales people. Just a yes or no will suffice. Will the molle panels work with swing out toolboxes. In advance....Thanks Mark from Builtwhite

[@BuiltRightInd]

Hey Daren, unfortunately since we haven’t done it ourselves, the official answer, if we must, is a no. The longer version is that I’m sure the two could work together if you got creative mounting the catch mechanism but you wouldn’t have asked if that was the right solution for you. Sorry!

[@travistettleton4024]

Will these fit if you have a Decked drawer system installed?

[@ytcrazies487]

What is the name of that specialty tool for the rivets and is there a particular size to get?

[@BuiltRightInd]

It’s a rivet but tool and the size you’ll want is 1/4-20 (that’s the thread size). Most of them come with attachments for a handful of sizes and 1/4-20 is extremely common. Should be $50-60 for a nice little set on Amazon.

[@ytcrazies487]

@@BuiltRightInd Good stuff, thank you! I'm going to upgrade my Ram with your system in the near future.

[@orlandochavez1724]

Wondering if these will still work with my plastic bed liner sides on my dual liner? The side panels fit pretty snug. Can you forsee any issues?

[@BuiltRightInd]

As long as the side panels fit snug, you shouldn't have any trouble! We've installed this kit on a truck with the bedrug as well with no issues.

[@alrude2847]

Will these the 2019 Ram 2500 short bed?

[@BuiltRightInd]

Yep! Just verify that you've got the hexagonal holes in your bedsides. If not, you'll need an 09-19 kit, which we also offer on our website.

[@Redeyereaper8]

Went to order but said 145 days to get....Holy crap

[@brandonh3951]

Just like I figured, WAY OVER PRICED

[@BuiltRightInd]

Don't know how much sheet steel you're buying these days or if everything you manufacture comes from overseas but this is what it costs to manufacture high quality products in the US and make enough profit to keep the lights on and pay team members a fair wage. If you don't see the value, that's totally fine, it's probably not the right product for you!

[@505thpir]

Maybe do the install on a white truck... make it clearer to see the end product