Headlight Projector Comparison Between 9 Popular Projectors HID - LED - Laser

[@dougfreeze]

FINALLY! Someone gives me just the pertinent information in one video.

[@dangoodman7374]

Very nice video! It sounds like the Morimoto Mled 2.0 is brighter than the Morimoto D2S 5.0 but when you get some 5.0s in stock it would be cool to see a comparison video of the two. I'd like to see how the cutoffs and width compare. Thanks!

[@7amoka]

Great video I wish you can update the comparison with the NHK Bi-LED 4th gen

[@arminag3827]

The best test of KZbin 👌👌👌👌

[@alaskadriftking]

Thank you for this comparison

[@JoeyLovesTrains]

Planning on using the profile hi lens along with the MLED 2.0

[@kynriv101]

"Toyota Corona"....homie predicted the outbreak. Good video though. Was considering getting my Cadillac retrofitted with the new mLED 2.0 from Morimoto and this solidified that decision.

[@therealb888]

Lol bro

[@Theferg1]

Sir great video I have been trying to find a channel like yours forever now I’m definitely glad I found yours. Let me ask you sir. I have a 2002 Chevrolet S-10 that belongs to my son that I’m trying to fix up a little bit before he comes back home from being on deployment in the navy. Which projector would be good to install into the 2002 Chevrolet S-10? What would you recommend? Thank you sir.

[@rajasekhar9840]

Very good comparison, you might have taken so much to put all this together. My request is if possible can you add iPHCAR projectors into comparison next time. It has headlight projector and also a fog light projector which are very good and reliable.

[@Lesiba2]

Brilliant video headlight guy

[@madbull4666]

Could you test the new NHK bi led projector? Seems decent but hardly any information.

[@willstamps5641]

check out this video and channel! kzbin.info/www/bejne/pWnKoImIitSZfsk

[@superdutyzack]

This test is amazing, it would be really cool to see some distance shots of these lights.

[@eugene9000pro]

The only thing that is in the question - is it really better to have ultra wide high beam (Morimoto HB mini) OR it would be better to go with concentrated narrow-focus far-throw supplementary beam. What do you think?

[@TheEelnoraa]

I have one installation question. The Morimoto HB, does it fit into H7 socket without cutting the headlight housing?

[@busared06]

Orienting the HB led vertical would be interesting! Hard to find out how it would perform though and if it didn't turn out well pita to turn it normal lol

[@eugene9000pro]

Great review. Sad, that manual exposition was not set to match the highest output headlight, so that we would not see 100% highlight clipping without getting difference between good and best

[@postrzelony]

Test is veeeryy good! Ups bi led laser - this is great! ❤️

[@summit111572]

Great comparison! If one does a retrofit, and wants extra performance, is it better to go for the best projector and expensive xenon bulbs 35w ballast? or to a quad cheap setup with low cost projectors, bulbs and such? Thanx

[@TheHeadlightGuy]

Quality always last in the long run. Expensive parts may seem similar to cheaper parts but if you look at the warranty offered with quality parts vs cheap parts that's what sells me to try new products and install parts into my customers lights

[@summit111572]

@@TheHeadlightGuy When i say cheap i don't mean bad. Another example would be quad morimoto mini h1 vs the most expensive bi-led projector.

[@TheHeadlightGuy]

@@summit111572 if they were aimed properly quad mini h1 would be brighter imo but alot more work. With a slight increase. Mini h1 only comes to my mind when space is tight

[@dangoodman7374]

@summit 1_1 I have quad Mini H1 7.0 with GTR gen 2 55w ballast and GTR bulbs that came with the kit. It's brighter than my Morimoto D2S 3.0 with the same ballast and CBIs. I tried XB35s in my H1s but they had a green hue. GTR, at least my models when I bought them 4 years ago had a lifetime warranty and I've been running 6 ballast across 2 cars and never had a ballast go bad.

[@jeremyswift7514]

Excellent video man, thank you for your time!

[@Levi-oq6ki]

Any experience with g5-Brt? It’s coated lens supposedly increases output. Would be interesting to see if it outperforms the EX in hotspot or side measurements

[@therealb888]

the g5-brt does outperform the EX in side measurements already, but the hotspot measurement is something to be seen. As for the coating it may increase the output by at most 100lx @30ft or something, it doesn't double the performance. The EX-L 3.2 coated lens version is the best spot performing HID projector with 1500-1600lx @30ft with 35w ballast, this is still close to 3x lesser than the laser hotspot which does over 4680lx!

[@rodwellcort7503]

Absolutely awesome video.

[@Dexion845]

Great comparison, next time compare a XenonDepot 5000K bulb to the competition. XenonDepot from my experience and many others, including even the retrofit source, performs a lot better than Morimoto his bulbs. Also an OEM D2S bulb comparison would be cool.

[@jhonimastersipayung5874]

Is there any differences between led projector vs hid projector? Especially at the lens technology. Or we can replace the bulb into all projector type and the result is depending only on the bulb quality?

[@whitelight32]

Hey friend, Great video, your work is appreciated, not many have such an ownest headlight review! very informative. I always travel at night in areas where animals crossing the road is quite often. Therefore, a headlight upgrade is necessary, What are your suggestions? I have a 2016 Mitsubishi Pajero, OEMs are: - low beam, HID projector (rated 35W). - high beam, halogen reflectors (rated 50W).

[@ozzysalas111]

Great video. Thank you for taking the time to compare those projectors.

[@andresorange2493]

Thanks for the videos man.

[@jessewashere4734]

I have the Profile Bi lens 2.0 for about a year now and I LOVE them! They are better than any of the HID projectors I have ever retrofitted. Then MLED 2.0 came out not long after. I have always wondered if they are better than the Bi Lens 2.0. According to this video, they are brighter. Issue for me is the shaft. MLED 2.0 shaft is too wide for my headlights (9007). I have tried to sand down the back side of the reflector to make the shaft fit. But I could never align it correctly. Couldn't get the lights to aim straight. So no MLED for me. :(

[@amjathkhan2004]

Hey, how do you like the Bi lens 2.0 so far? Do you have any videos to share? I'm looking to add it to my D2S setup which has G5R+Philps XV G2+35W hylux ballast. So, any help would be highly appreciated. And I'm also in the same boat, there isn't enough space for the MLED. Thank you!

[@jessewashere4734]

@@amjathkhan2004 I absolutely love my Bi Lens 2.0. I retrofitted them into both of my vehicles. I have no complaints whatsoever. However, you already have an amazing D2S setup right now. In term of brightness, your setup will beat Bi Lens 2.0. I also have the exact same setup and did a lux test, G5R with Philips XV 2 and 35W Hylux ballasts outperformed the Bi Lens 2.0. I think it was about 150 lux at 25 feet? But in term of color, Bi Lens 2.0 is whiter, a true 5000k IMO. MLED is a bit bluer like 6000k. Sorry, I do not have any videos to show. I have one picture but it's pointless. This is something you have to experience in person because cameras will never capture the true color or brightness of the light output.

[@amjathkhan2004]

@@jessewashere4734 Thank you for your detailed explanation, much appreciated! The pronlem with my current setup is either the bulbs has lost like 40% of their brightness already or the ballast has problem. All my friends were equally surprised at how well these bulbs light up the road in the beginning, but after little over two years, I feel they somehow lost the magic. I asked the same question in one of TRS YT videos, they replied back saying the bulbs and ballasts degrade in quality as they age! I am just disappointed given the cost of the bulbs and it's just two and half years. So, I have ordered a $30 Chinese yeaky D2S bulbs to just confirm. Meanwhile, I always wanted to DIY quad projector and this bi lens seems to be good fit in terms of less power consumption and long light throw like 500 meter away. I really appreciate your inputs in this. Seems like I should go with a 3" bixenon instead like Mini D2S 5.0. Thanks again!

[@jessewashere4734]

@@amjathkhan2004 I think a quad setup will be amazing. If I have the room to do it, I would. What TRS said about the degrading components is true. However, like you said, after two years? No. Especially the Hylux ballasts, they are OEM quality. They are unlikely the cause. I bought a pre built Mini H1 a few years ago. After a year later, I noticed the light output got a lot weaker. They were reading at around 250 to 280 lux at 25 feet. First, I replaced the light bulbs with Morimoto H1, 5500k and 6500k. While light output improved. But still no where close to where it was when new. So I replaced the ballasts with Hylux. Same result. So I suspect the HID reflector bowls are degrading. I disassemble the unit, inspect the bowls. Yup, the bowls are degrading because of the heat, not much, but enough to rob my light output. So I replace the projectors with Morimoto Mini H1 7.0. Ahhh... much better. But still not where I want it to be... Long story short, your HID bulbs will degrade along with your projectors. But your Hylux will last many years. Even with LED projectors, they will also create heat. But there is a heatsink and a fan to fight the heat. It will keep your LED chip cool, and should put out the same brightness until it dies. There is one thing you might want to consider. If any components attached to the LED projector fails, you will need to replace the whole unit $$$. HID wouldn't have that issue as you can replace one thing at a time.

[@amjathkhan2004]

@@jessewashere4734 Thanks you so much!!! That's informational and really helpful. Now, I know what to look into - The projector! I wish I had the tools and techniques to test the LUX before and after. Also, get to check both the old and new projector side by side with the same setup before buying though since it's just two years since I bought them. You mentioned that the projector bowls got weaker due to the heat. Is the damage visible to the naked eyes? How would they look? Thanks a ton!

[@gtcam723]

What year Corolla was that projector from?

[@Dj1Kreationz]

Would you by chance know which of the bi-led projectors you have would be able to swap into a 17 pilot housing ?

[@user-xm6oq9gz9u]

I'm having a custom headlight specialist upgrade my bow hid projector to the morimoto 2.0 led. do you think that is a worth while upgrade ?

[@Snicker60515]

I bought the MLED 2.0 and I've been sorely disappointed. While the color is nice, the width is just not there and sometimes it feels like a blindspot off to the right. At 25 feet away from a wall, the cutoff from the driver's side doesn't reach the cutoff from the passenger side. So I did what I should've done in the first place, I ordered a pair of D2S 5.0s. Problem solved!

[@Brucelungs]

What are you running on the D2S 5.0? Morimoto 35/50watt? Also what bulb

[@Snicker60515]

@@Brucelungs I'm running Morimoto XB 35W ballasts with the Osram CBB bulbs. It's necessary because the AR coating on those lenses warms the color. While I was waiting for the bulbs and ballasts I was running 4300k bulbs that I had stored and they looked like really bright halogens, same color and all. But the CBB bulbs are a huge improvement. Just make sure you don't have window tints on the windscreen otherwise you can't appreciate the overall white color of the bulbs. And also don't forget, higher wattage ballasts also warm the color as well. Even after all this though, my Mini H1 6.0s are still wider than the D2S 5.0s. Wish I could get my hands on a pair of D2S 4.0 or even 3.0, before all this hotspot, lux reading nonsense...

[@henrygonz5869]

1. Do Morimoto MLED 2.0 Projectors fit a 2014 Honda Odyssey EX-L ?? 2. Which LED bulbs do you recommend for these ?? Do they come with LED bulbs included ??

[@rumruumm]

MLed have the LED built into them. All you gotta do is hook up the low and high beam wires to it

[@johnmccarthy8883]

Hey, I have a 2019Jeep compass with HID projector setup, can I Retrofit em with a laser projector ?

[@mohammedalmubarak1070]

If I send you pairs of headlight can you fit one of those projectors car is Expedition 2010

[@limojag]

where can we find the laser?

[@borislavtodorov6191]

Is it nhk g5 is better than morimoto mini 2.5 5.0

[@shaymcquaid]

Very nice video!

[@marcingruba7391]

I have an audi A8 D3 with hella e55 xenon. Is the UPS bi LED larger than e55 and will it fit in the lamp?

[@s3ekon941]

Go for the mled 2.0, u can find the brackets to do a plug and play setup, at least that's the next step for me, replacing the old evox-r 😊

[@marcingruba7391]

@@s3ekon941 I already have ups biled from 2 years, they are amazing, and even managed to keep the adaptive cornering headlights.

[@marcingruba7391]

Whitch generation of koito bi led?

[@therealb888]

Probably 1a, aka 1st gen with a clear lens, so original fresnel has like a 100 lux less.

[@borislavtodorov6191]

May I ask

[@zacharyohare6029]

Funny, because the Corolla projectors outperform my shit GX Oem lights by miles too Need, uh, 4. yeah 4 please, BiLED/Laser...

[@jinzheng5347]

I am the manufacturer of car lights from china , our main product is LED&Laser projector for car lighting upgrade and also customize the lighting based on your requst. if you are intereted I can send you more infromation about laser projector , I believe our laser projector can sell well.may I have chance to do business with you

[@jkl6868]

😲👍👍👍🙏🙏🙏

[@carloscervantes836]

Toyota projector Worse performing Some engineer in Japan Prepares blade for Seppuku Next time can you list the output when a high beam secondary overlaps the primary projector.