Yeah this is something I’d probably just let professionals do for me instead of messing something up myself lol Thanks for this detailed video. A lot of respect to you guys putting in this quality work and craftsmanship
@variantaero3 жыл бұрын
I'm so glad this video came out right now! I'm about to do install mine this weekend
@circuitdemon_3 жыл бұрын
Awesome! Good luck and let us know if you have any questions!
@variantaero3 жыл бұрын
@@circuitdemon_ In the middle of doing the retro fit and I'm missing one of my 9005 washers for the projector 😭 Only one of the boxes came with it, I wish I hadn't taken my headlights apart without looking for both of them first. I sent you guys an email about getting the missing part
@DdgeShelby Жыл бұрын
I've never heard of an ultrasonic cutter before today! Thanks!
@circuitdemon_ Жыл бұрын
Makes cutting plastics so much easier!
@JoshRus Жыл бұрын
Hey man, appreciate the high quality content. I'm about to tackle this project on my rig pretty soon and look forward to using this as a guide although i'm not doing it on a subie! my only concern is that my highbeam is also my drl and i want to install quad halos so im not sure how that will work out, but i will be on the lookout and continue researching other content to see if my questions are answered! keep up the solid work.
@circuitdemon_ Жыл бұрын
You may need to disable the DRL feature!
@tonyg-2jz822 жыл бұрын
Whaaaatttt!!! You just made my day!!! Had no idea how to make a bixenon H1 (actually HID H1 Bixenon) when I have a female 9005 setup for my stock high beams. I'm so ditching that and buying this instead. I don't need a bixenon for high beams my low beam is a Q45 projector plus I have Halos surrounding both projectors so I don't need an even bigger headache this video is like Excedrin Migraine relief thank you 🙏
@adamhouston48833 жыл бұрын
This awesome! wish this would have been out before i did mine! lol.
@alexwalston72463 жыл бұрын
Thank you Jordan! You guys should link this video to your DIY kits :)
@sickcoverman3 жыл бұрын
I literally just finished doing my set 😂
@circuitdemon_3 жыл бұрын
Hope it came out super dope!
@ciannabrown33733 жыл бұрын
Is that shroud the mini Gatling gun? It looks much bigger than in the pictures. The projector itself looks bigger than in the pictures too.
@FiftyQuest153 жыл бұрын
If I am going to run a setup with these as the high beams what HID projectors would work for the low beams that aren’t bi xenon. I’d need mini as well to fit a 2012 civic.
@johnh.george90593 жыл бұрын
what shrouds are you using?
@myname92523 жыл бұрын
Pretty cool. So theyll work fine with the housings cover back on right? What sealant would I use to adhere the cover back on? Also,these dont require a ballast? Pff nm.lol.I didnt realize that these kits were for Subarus. But I assume I can use them on anything as long as I get the correct connector?
@nemoemo68343 жыл бұрын
outbut TEEEEEEEEST!
@geriatricginger2 жыл бұрын
Because I don't know... if the bulb burns out in the Morimoto, do you have to disassemble the entire housing again? Or am I missing something? Thanks.
@kevinarcher77012 жыл бұрын
I have low and high beam in my projector light with demon eye.On the low beam side. If I tie the stock high beam headlight into the projector light would it hurt anything? The reason is now I have a factory high beam bulb in its socket but is not connected.
@spencerfelt20936 ай бұрын
What shroud did you guys use for this retrofit?
@zombie22_8 ай бұрын
Do you know if these high beam projectors would work as a drl as well? I'm retrofitting some into a pair of honda accord euro headlights i imported from japan onto my tsx, and it's an actual pain to switch drl source since it's canbus controlled
@circuitdemon_7 ай бұрын
They do not have a DRL power setting, they would be just full bright. I would check out these guys if you need a high beam projector with a DRL setting: circuitdemon.com/products/led343?_pos=2&_psq=hi+lens&_ss=e&_v=1.0
@spallaxo11 ай бұрын
Are shrouds necessary for install? Or can I just chuck them up in new depo housings?
@circuitdemon_11 ай бұрын
You can just toss them in, but they will look a little odd with the hardware exposed on the front of the projector. The shroud is purely aesthetic.
@johnh.george90593 жыл бұрын
I need this
@EdwinRodriguez-et3sr3 жыл бұрын
You guys should sell the gills for 08-14 on the circuit demon website
@circuitdemon_3 жыл бұрын
Unfortunately we do not sell the gills for DIY kits as we like to keep them for in house exclusive builds only!
@sahirasaf78443 жыл бұрын
Can I fit this on my w211 high beam?
@Danything12310 ай бұрын
Is it legal to install highbeam projector?
@circuitdemon_10 ай бұрын
All depends on your local laws
@timonyc5 ай бұрын
it looks like you got nothing for Toyota ?
@circuitdemon_5 ай бұрын
We do! Email the team and we would love to help you out! sales@circuitdemon.com
@DanielChrisCole2 жыл бұрын
Does it fit sti 2011?
@circuitdemon_2 жыл бұрын
Yes it does 🤘🏼
@frankorobinson15402 жыл бұрын
These things always look great but if you don't know someone willing to risk there inspection license you can't get inspection cause the bazztards,buzzards say right on package, not legal for headlamps in usa only for fog lamp use,,would love to do projectors but you won't get a sticker in my state,lol
@CarsdotEV3 жыл бұрын
(Suzuki Swift) (2nd) generation headlight) 😢😢😢🙏🙏🙏🙏🙏🙏🙏🙏please please 💌💌💌✨♥️♥️♥️😔😔 sir
@Samjitsuu3 жыл бұрын
Hey could I convert my aprilia rs 125 headlight from reflector to projector demons eyes? Thanks 😊