Headrush MX5 - How to Midi Control with Morningstar MC6

We will take a look at how to use the Headrush MX5 with the Morningstar MC6 midi controller.
We will program the switches on the MC6 to turn on and off the blocks / effects in the MX5.
We will also program the MC5 to call the different menus that we program in the MC6 that correspond with the different rigs created in the MX5.
If you want to hear what the Headrush Rigs sound like in a full mix feel free to check out my music videos as I use Headrush FX in all my songs.
For those of you interested in the Headrush MX5 here is the Headrush FX channel
/ @headrushfx
and web site www.headrushfx...
For those of you who are interested in checking out Celestion's IR's check out the link below
www.celestionp...
For great informational videos on Headrush products check out my friend Doc Mcfarland he is one of the best informational channels for Headrush. / doctormcfarland
Here is a list of the equipment used in the making of this video
Video Capture equipment:
DVC - Digital Video Camera & OnReal 4K action cam
Logitech C922 & C920
Audio Capture equipment:
ZoomH4Npro & Cakewalk by Roland UA-25EX
AKG P220 Condenser microphone
Software used:
Reaper DAW www.reaper.fm
Corel video studio 2020
Logitech Capture
Epiphone inspired by Gibson ES 339
Headrush MX5 multi fx unit
Morningstar MC6 midi Controller
TL Pedals KingKlon
Boss EV30 expression pedal
cables by Boss & Digiflex
Shure SRH440 Headphones
Headrush frfr108 monitors
Helios Predator 300 Intel Core I7 NVIDIA Overclockable Geforce GTX 1660Ti
Time Stamps
0:00 Intro
0:33 Cables needed & connectors
2:05 MX5 midi settings
3:39 Create a new test rig
6:21 Program midi controller with Morningstar editor
12:24 Testing MC6 programmed switches with MX5 rig
13:35 How to program MX5 to send signal to pull menu in midi controller
15:25 Explanation of what is happening between MX5 & MC6
16:50 Final thoughts & overview
#Headrush #Headrushfx #MX5 #Headrushmx5 #morningstar #MC6 #Morningstarmc6
#HowDoYouHeadrush

[@iseemonkeys7190]

I know little to nothing about this stuff.....but man you really get some nice sounds, and it's fascinating to watch. A fantastic video brother. Huge thumbs up and rock on !! :)

[@ThePaddedPedalroom]

Thanks Brother! ;)

[@andreaboglio7792]

Great tutorial!! I had the pleasure to try one of these beasts a few hours from a friend of mine.. Amazing!!

[@ThePaddedPedalroom]

Thanks Andrea! I agree these things are lots of fun and sound great! ;)

[@MelaniCholie]

my support for sure even I have no idea about that...as a singer :-)) Anyway I like a lot you show people how to work with!

[@ThePaddedPedalroom]

Thanks you so much! Happy New Year, lots of Health and Happiness in 2022! ;)

[@katedeaux2039]

when I invest in pedals I'll def come back to this

[@ThePaddedPedalroom]

very cool, it is definitely worth considering if and when you look for something like this.

[@AndyDion]

Man the head rush can do a ton Cool video Francis

[@ThePaddedPedalroom]

Thanks brother! I hope you and the family are doing well. I am sorry i did not do my green screen yet, I have not been feeling up to it, but I am feeling a little better, I will try to get it done. You rock! ;)

[@DunsysGuitarWorld]

Nice video, Francis - when I finally get one of these fine units, I'll know everything about it thanks to you good self. Best wishes for 2022.

[@ThePaddedPedalroom]

;)

[@ziofender6699]

surely you can create very beautiful sounds, I have a (zoom g2 1u) I stayed in the Middle Ages😆 thanks Francis for this video 💪🎸

[@ThePaddedPedalroom]

Grazzi Fabio! if you are able to find your tone with your Zoom G2 1u then that is the right tool for you. I gotta say that you have great tone my friend, so I would not worry about being in the middle ages lol. ;)

[@weedyguitarstudio1715]

Awesome video brotha really like your super pedal really awesome brotha I got a Labtop and a Brand New mixer with everything needed to record and create can't wait to completely learn it it is what I needed for a long time Rock On!!

[@ThePaddedPedalroom]

Rock on Brother! That is fantastic news! I can't wait to hear the difference in sound, you will see it will be like night and day. What DAW will you be using? Happy New Year! Lots of health and happiness in 2022 to you and your family.

[@AdamBurseMusic]

Great video Francis, that was awesome man 😀🤘🎵🔥🔥🔥🔥

[@ThePaddedPedalroom]

Thanks Brother! You Rock! ;)

[@JeremyAbbottMusic]

Cool dude This is excellent!

[@ThePaddedPedalroom]

Thanks brother! Hope you are doing well, lots of health and happiness in 2022! ;)

[@Ast3rixMusic]

This is a great controller and it does everything you expect in a midi controller. I like that it supports adding a separate analog supported midi switcher so basically you could control your whole rig without touching anything but just this device. I was hoping to do that with the HR pedalboard as my master controller, but the midi features are just not advanced enough.

[@ThePaddedPedalroom]

Yes correct you could control the whole rig with the mc6 without touching anything. I understand the HR is a little limited in what it can do. Morning star also makes an 8 button controller.

[@davidwoods358]

I'm sure I would never be able to get this to work with my MX5 (no patience no attention span and no brain here) but it is nice knowing that the unit is capable of doing all this. Only having the three foot switches is a bit limiting at times.

[@timehasbeenkind]

Great tutorial Francis!!! 👏🤘🤘🤘🤘🤘🤘👏👏👏

[@ThePaddedPedalroom]

Thanks Brother! ;)

[@dr.gregoryweisswassernd7251]

Great review. Really helpful. Might have to get one to go with my mx5

[@ThePaddedPedalroom]

Thanks, I am glad I was able to help. how are you liking your MX5? have you got any 3rd party IR's loaded in it? Keep on rocking!

[@dr.gregoryweisswassernd7251]

@@ThePaddedPedalroom The mx5 is a lot of processing in a little unit. Love the workflow with the touchscreen more than any multi effects unit I’ve used before. This is my first IR device so I need to find some good ones to add. Seems like the way to go versus amp models. I’m running this with a Blueguitar Amp 1. Still working out where to put it in the flow. Tried 4 cable, after drives, and even parallel effects loop which was cool. So many options. The MC6 would push me into button heaven on a very small amp setup.

[@ThePaddedPedalroom]

@@dr.gregoryweisswassernd7251 I totally understand, I have spent over the last 2 years discovering Headrush, I have the Gigboard and now the MX5, which I love its small form factor. I have decided that I like the amp models in the system but paired with good 3rd party IR's, currently I have a few IR's from Celestion, I have Sonic DNA's Doc McFarland IR pack and I have the IR pack from Fuzzlord Effects, and with those I truly don't find the need for anything else. When Using IR's it is important to bring the High cut down from 20000Hz to about 5 to 6000 Hz and to bring the low cut up to about 60 to 90Hz, that makes it sound more real, it mimics the natural frequencies that a speaker cab would have. Enjoy your Rig, they are lots of fun.

[@elgato2717]

I did. Thank you,

[@recycled_city]

This might be nitpicky, but the midi TRS connection is 1/8” TRS, not 1/16”. May not be an issue for most, but figured it mention it in case anyone not familiar with midi was confused, especially as 3.5mm midi connections can be confusing enough.

[@ThePaddedPedalroom]

No worries my bad. 👍

[@mattfire83]

I couldn't get my HnK midi controller 432 to change patches on the MX5. I watched the video and shut off the auto assign like you did and now it is switching!

[@ThePaddedPedalroom]

Awesome, I am glad my video was able to help you. Have a great day and holiday season.

[@alextessier7762]

hey! is there a way toset 1 button on the mc6 for bank up and 1 for bank down?it a bummer to press 2 button to change your rig.

[@ThePaddedPedalroom]

if you hold down button 1 stop/rig you get a sub menu which gives you 3 options, if you select hybryde mode you can bank down with button 2 and bank up with button 3. I hope this helps.

[@toeyterry]

I was looking for a way to hook up another exp pedal to my MX5. I already use internal pedal for volume and wah, and love to have one to control tremolo or delay time. Reading from comments, sadly this doesn't seem possible.

[@ThePaddedPedalroom]

You can control up to 4 parameters per bank with the expression pedal. but you are limited to an A and B with the MX5 so you could have your built in pedal for A and control up to 4 different parameters and have an external pedal to control B which can control another 4 parameters. you can check this video I made going through that. You can not however have an A, B, C, D, that is only possible from what I see on the Prime. I hope this helps.

[@elgato2717]

Hi Thank you for your video. Just one question. Have you ever had any problems with the internal expansion pedal? Mine stopes working from time to time. Thanks

[@ThePaddedPedalroom]

do you mean the expansion pedal on the MX5 or the expansion pedal feature on the MC6? Regarding either i have not had any issues.

[@CAMPGMAY]

nice vid I just picked up mx5 and I can barely turn it on lol

[@ThePaddedPedalroom]

Thanks. The more you play with the the easier it will get. I find it is the most intuitive multi effects unit.

[@adenandsimonmusic82]

I send MIDI program changes from my IPAD to my mx5 on every song change, which brings up the relevant MX5 rig that I want to use. I like the idea of getting extra foot switch control using the MC6, but am thinking that I would be taking up a MIDI IN port which would prevent me using the connection method you have described here? Have you any thoughts on a work-around please?

[@ThePaddedPedalroom]

You probably could program your tablet with the mc6 pedal and send through to mx5, but if you have it working well with your tablet I say sometimes less is more. keep it simple. you could always contact morning Starr and see if they could help you with the programming?

[@alextessier7762]

Is there a way to create a bank with song preset ? Lest say for 1 song I have 5 preset ? Can I assign a preset number to each one and recall them with the mc6 ? Like song 1 rythm-lead-clean-ambiant-ambiantchorus.

[@ThePaddedPedalroom]

you can do that using scenes, you can either program the scenes on the mx5 and use its buttons or you could program the mc6 to control the scenes, I believe you are limited to qty 3 scenes per rig.

[@Kevinkrahn]

Great video. I’m getting the mc8 soon. Would I be able to use mc8 to change scenes as well as toggle up and down between rigs?

[@ThePaddedPedalroom]

I have not tried that but I know it can do both, just not sure if it can be done in the same menu. I will have to give it a try. if you get your mc8 before I try please let me know if you can get it to work.

[@veguillar1]

Can I plug in my source audio collider via MIDI to the headrush to control the parameters and presets?

[@ThePaddedPedalroom]

The HeadRush MX5 can be controlled by incoming MIDI CC (control change) messages from external MIDI gear. These MIDI messages can be received from hardware connected to 1/8” (3.5 mm) MIDI Input only. Check out page 28 in the user guide it shows a chart of the available parameters that can be controlled.

[@elgato2717]

Thank you for the video. Very informative! Just one question, pleaese. Why did you choose this controller? And what do you think of Blackstar Live Logic USB MIDI Footcontroller, would it work in the same way? Thank you

[@ThePaddedPedalroom]

My Pleasure. I chose this controller because of its flexibility and ease of use, the Morningstar software seemed easy to me. It has clear instructions and software, lots of support and videos of how to use. I am sure any other midi controller could also do the job as well, it depends on if you like the user interface. I am not familiar with how the Blackstar live works but it seems to have decent software to program it, if you like it I am sure you can make it work. I have seen others use the M-vave chocolate midi controller with the mx5 you may want to check that one out too.

[@elgato2717]

Thank you for your reply! I'm just choosing from what is available here in Dubai in music stores, and not too expensive))) I'll think about it a little more. Thanks

[@ThePaddedPedalroom]

@@elgato2717 the mvave chocolate typically can be found on amazon maybe even check hotone midi controller they have one that also works with the mx5.

[@elgato2717]

I will, thank you very much!

[@zoilopazos18]

Great video! Just a question. Can I program the mc6 for the mx5 scenes option?

[@ThePaddedPedalroom]

I believe so, i have not tried it yet, but you can program the mc6 to mimic the buttons on the MX5 so in essence you should be able to, but I would just leave the scene mode set up on the buttons on the mx5 and use the mc6 to turn on and off the blocks.

[@sammy_rayz]

hey great video Francis, I'm on a Pirate Midi Bridge 6 - it's a pain in the a$% trying to program it using the editor as I don't know what I'm doing. Any chance you could send me like a screen shot of your program codes and I could just go with your set up?

[@ThePaddedPedalroom]

For Headrush MX5 go to page 28 all the CC codes are there. cdn.inmusicbrands.com/HeadRush/mx5/MX5_User_Guide_v1.2.pdf Hope this helps.

[@dlight9456]

Can we set mc6 footswitch to choose a particular rig without scrolling? Just automatically switch directly to a selected rig. Or can we assign 1 rig in a setlist to one of the midi footswitch? And do this to other rig on a setlist and assign it to another footswitch. So the function will using the midi footswitch to select different rig in setlist without scrolling.

[@ThePaddedPedalroom]

Thanks for your comment. I will look into this some more, but from what I can see the MC6 would be capable of doing this if the mx5 programming would allow this, unfortunately at this moment there are no PC codes available for rigs to be called upon directly by a button. Maybe write an email to headrush and request this option, they could always expand the software in a future update and make this possible to do.

[@tannerspurlock1997]

yes you can. set the MC6 or any midi to send a PC # for the midi control number that is set in the hardware settings.

[@alexisolivo3574]

Hi! Can the morning star send a CC that controls more than one pedal? Ex button A will turn on 2 pedals and will turn off 1 pedal.

[@ThePaddedPedalroom]

It should be able to do that.👍 Not sure if this is an issue, it seems that it may momentarily mute the signal if it is sending a signal to more that one pedal at a time, it does not seem to do that when sending a signal to only one pedal. that was the case in 2019 not sure if it still is, I have not tried it personally so I can not comment, I may give it a try if I do I will let you know.

[@alexisolivo3574]

Thank you so much brother! This is what I am thinking, Imagine you can operate “a rig” as if you had a rjm pedal switcher

[@danielgreenberg4751]

Very cool! Is there a way to have each button on the morningstar be a different rig/patch of a setlist on the MX5? So you can bring up a new completely different patch with each botton on the morningstar?

[@ThePaddedPedalroom]

I have been trying to accomplish that but at the moment not been able to maybe if the software gets updated to permit that then we will be able to. if that happens I will let you know.

[@tannerspurlock1997]

yes you can. set the MC6 or any midi to send a PC # for the midi control number that is set in the hardware settings.

[@metalguitar777]

Can you do this but with scenes? For example, I have a few songs that require more than 3 scenes, what I’ve been doing is duplicating my rig and on the duplicate rig I’ll add the 4th or 5th scene. Changing rigs in the middle of a song is annoying on the MX5. Would I be able to use this controller to just have one rig and then put the additional scenes on the controller? I want to get this controller but only if I can use it for scenes and not just individual blocks. Thanks!

[@ThePaddedPedalroom]

The controller (MC6) is capable of doing this, but the MX5 programming does not permit it. The limitation of of this working is the programming of the mx5 (there are no CC codes for this), if Headrush expands the programming in a future update, perhaps we will be able to do this at some point, but for the moment it is not possible. Hope this helps.

[@metalguitar777]

@@ThePaddedPedalroom Ah ok that sucks but thank you very much for the quick reply! I guess I’ll consider getting the pedalboard then lol.

[@ThePaddedPedalroom]

I think the pedalboard is an awesome choice if I was gigging and weight was not an issue for me, I would definitely have one.

[@musicandthewalk]

Thanks for the tutorial. Would you know how the mc6 would call presets in the mx5? Basically use the mc6 as the master controller and have it call the presets/rigs in the mx5?

[@ThePaddedPedalroom]

I am not sure if that is possible, the only way I can see that working is if you program the mc6 buttons to mimic the ones on the mx5 so you can recall or bank up and down the rigs but to actually assign on rig to a button on the mc6, at this moment I do not see how, unless headrush program it to funcion that way and make some sort of assignable code for it not sure. I will keep fooling around with it and if I find it or if there is an update made which permits this, I will come back to this comment and let you know.

[@tannerspurlock1997]

yes you can. set the MC6 or any midi to send a PC # for the midi control number that is set in the hardware settings.

[@MultiGuitar321]

Hey great video! could it be possible to recall any rig with de mc6 and use the mx5 fs to control the scenes?

[@ThePaddedPedalroom]

I believe so but I have not tried it yet, I will see if I can get it working and I will let you know, If it work I will make a video to explain it.

[@tannerspurlock1997]

yes you can. set the MC6 or any midi to send a PC # for the midi control number that is set in the hardware settings.

[@richardlatham3771]

how do you run power from mx5. is there a power supply for pedals that will work to power the mx5 on a pedal board.

[@ThePaddedPedalroom]

I was just using the mx5 power supply, I have not found a power supply yet that supplies the correct amperage to do away with its power supply. If I find one I will let you know. if you find one please let me know.

[@richardlatham3771]

I’m looking at getting an IEC adapter fitted to board then split to 2 cables to

[@richardlatham3771]

Sorry pressed send. Split to 2 cables. 1 for mx5 and 1 for power supply. Just have to hide it all under board

[@toddpattison]

Are you sure you're not scotty streaming from the engine room of the enterprise :P

[@toddpattison]

Ok I was close.. you're on the next gen star trek :P

[@ThePaddedPedalroom]

LOL

[@ThePaddedPedalroom]

@@toddpattison Bingo! ;)

[@robertoquintana7359]

Good morning ! Thanks ! can i assign two pedals (effects) to a single morning star switch

[@ThePaddedPedalroom]

HI Roberto, The morning star is capable of doing that it is only limited by the program of what it is controlling. in this case the mx5 does not have that option available in their midi programming code. perhaps if Headrush has enough requests for this, they can update the software to permit that. the only way at this moment with the headrush to activate multiple pedals at the same time would be using scenes, if you create a scene with multiple pedals on that will work.

[@robertoquintana7359]

@@ThePaddedPedalroom thanks ! God bless you !!! You are amazing !!!

[@ThePaddedPedalroom]

@@robertoquintana7359 Your Welcome.

[@starluxstudio619]

Is it possible to program it to change which rig you're using while in the looper mode? I just need to go up and down one patch.

[@ThePaddedPedalroom]

I don't think that is possible. the MC6 is capable of doing it, just the program limitations of the MX5 do not permit at this moment. perhaps if Headrush at some point update the programming, it may be possible in the future.

[@starluxstudio619]

@@ThePaddedPedalroom Dang ok. That would be my number one want for a footswitch. Having to turn that rotary knob with your fingers to change rigs in loop mode is not going to be very convenient in live gigs.

[@ThePaddedPedalroom]

@@starluxstudio619 I understand, if you use the looper a lot during gigs what you could do is leave your MX5 in rig view and program a midi controller to control your looper, if you look on page 28 of the mx5 manual you will find the CC codes to program your controller and you can assign individual switches of your controller for your looper and leave your mx5 in rig mode so you can hit the footswitch up and down on you mx5 to switch rigs. I hope this helps. for any other features we need to bug headrush to add CCcodes to permit us to do what we are looking to do, maybe if enough of us complain they will do an update with added cc codes.

[@LauriesMishmosh]

How are you?

[@ThePaddedPedalroom]

I am feeling exhausted but better. I think I got through the worst of it. How are you doing?

[@uburoibob]

If the Morningstar has Expression pedal inputs, you can plug one in and do a CC# to address 1 with a range of 0-127, you can control expression pedal A. Still looking for the CC# for expression pedal 2. Any chance you found that?

[@ThePaddedPedalroom]

There is no CC code for either the mx5 or the gigboard for that. the morning star can accept two expression pedals but the headrush does not have a cc code for that. however you can add a second expression pedal to your mx5 directly by plugging it into expression input and you can program it in the hardware assign, so you could use the mx5 built in expression for one thing and a secondary expression for another. also remember that in the hardware assign you can actually assign 4 tasks per expression pedal. I hope this helps.

[@uburoibob]

​@@ThePaddedPedalroom Right. With my Gigboard, an expression pedal plugged to EXP 1 with CC#1 emulates whichever expression pedal is active from using the external toe-switch (which I use an MXR TAP to control). On my MX5, EXP 1 on the MIDI switcher only handles EXP A (via CC#1), while B, as you said, doesn't have a MIDI call and is plugged directly into the MX5. The nice thing about the MX5 is I can use both A and B at once with two external pedals (A through MIDI and B plugged directly) and with the rest of the MIDI buttons, keep the unit off the floor while practicing. Or, just take the tiny pedal to a gig and put a Dunlop Mini X pedal next to it and have both at once. Which is what I am doing, while actively lobbying Headrush to give us full MIDI controls so there's only one cable coming from either unit. I primarily use the expression pedals to control mix, mod, and feedback on delays. BTW, great videos!

[@ThePaddedPedalroom]

@@uburoibob Thanks, I think I will join you in lobbying Headrush to give us full midi controls also.

[@jackmesser7148]

Great video thanks so much for putting this together - but I have a question I hope you can help me with! I have a Bias Mini amp head (with no effects built in) & the Headrush MX5, I ideally want to be able to use a foot switch to do the following: Press 1 = Clean channel on amp engaged, delay + chorus on Headrush off Press 2 = OD channel engaged, delayed + chorus on Headrush off Any idea on how I can achieve this? I know both the head and Headrush are compatible with PC messages but this is my first time really using MIDI so any recommendations would be great!

[@ThePaddedPedalroom]

Hi Jack, I believe it is all dependant on the programming capabilities and limitations of the midi functionality of the bias mini amp head and the headrush. I am Sure MC6 has the capability of doing what you want but it is dependant on the other items. I wish I could help you more but I am also new to midi control. I would test it if I could but I do not have the bias mini amp. I hope you are able to figure it out, it really is amazing what you can do today with midi. Rock on!

[@jackmesser7148]

@@ThePaddedPedalroom Hi mate - thanks for the reply! So both the bias mini head & Headrush Mx5 will work with a midi board that can send and receive PC messages - any suggestions on a midi board?

[@ThePaddedPedalroom]

@@jackmesser7148 the Morning Star MC6 is good but if you do not need as many buttons you could use the mc3 if not you could look at the Hotone Ampero Control 4 - Button Bluetooth midi controller, it may be more accessible. however there is a way for you to send a signal from the headrush mx5 to your amp, you may want to try and see if you could use scenes in the mx5 to get the effects you want on while sending a signal to your amp to change channels on your amp.

[@jackmesser7148]

​@@ThePaddedPedalroom So I have setup the following on MX5: Rig 1: Midi Program 11 Rig 2: Midi Program 12 Both these midi channels correspond with amp presets saved to the Bias Mini head, however when I changed rigs the channel does not change; regardless of me checking both amp and pedal board have the same assigned midi presets. I am a little lost for what to do!

[@ThePaddedPedalroom]

@@jackmesser7148 I would say you could ask your question directly to Headrush, they seem to be very responsive and helpful, you might be able to find out if what you are trying to do is possible. If not maybe ask Doc McFarland, kzbin.info he is a master when it comes to the Headrush, I think he has dabbled a little with the midi function in the headrush.

[@elgato2717]

The M5 internal pedal, I mean.

[@ThePaddedPedalroom]

I have not encountered any issues with it. you should contact tech support at Headrush, they are very response and should be able to help you.

[@musicnonstop1945]

can i use the M-wave chocolate wireless midi controller on the MX-5 ?

[@ThePaddedPedalroom]

Hi Music NonStop, I just looked up the Mwave midi controller, and I can't see why it would not work. it is at a really good price too, I might have to pick one up to do some tests. let me know how it goes for you.👍

[@ThePaddedPedalroom]

I was looking aging, just make sure you get the model that has the wireless midi conector, as the mx5 can not receive bluetooth.

[@musicnonstop1945]

@@ThePaddedPedalroomok that's good to know,, i'm just about to order mine, hope it works, ill let you know, thankz so much, appreciate your reply.

[@ThePaddedPedalroom]

@@musicnonstop1945 My Pleasure! hope it works out.👍

[@joshjabrica]

Yes, you can use the M-vave Chocolate plus the MS-1 BT adaptor.

[@mikael.cherin]

Is it possible to change rigs with midi? I cant figure that out. Not using a morningstar though… good video anyway

[@ThePaddedPedalroom]

The only way you can change the rigs with midi is if you program the buttons to copy footswitch 1,2 and 3 then you can use that to bank up and down, but you may as well just do that on your mx5 buttons and leave the other buttons free for other functions. if you look at page 28 of the mx5 manual you will find the midi control CC codes, this is what the mx5 is limited to control. maybe if at some point Headrush expand the software in an update to include new cc codes that will change but at this moment this is all that can be controlled by a midi controller.

[@mikael.cherin]

@@ThePaddedPedalroom Thanks for the answer. Then i can stop scratching my head for now 😂 the thing is, after the latest update they removed the function to change rigs from inside the looper… a feature I miss very much now. That’s why I want to change rigs with midi now. I’ll have to wait and see if they add more midi commands.

[@ThePaddedPedalroom]

@@mikael.cherin In that case leave your mx5 in stomp rig mode and program your midi controller with the looper functions this way you can do both at the same time.

[@mikael.cherin]

@@ThePaddedPedalroom Thanks, I’ll try that.

[@mikael.cherin]

@@ThePaddedPedalroom how about sending PC messages to the mx5? My midi controller can do that. But how do I know wich pc number a rig has?