Heater Box CLEAN OUT! Suzuki Samurai

The easy way to get your heater blowing HOT AIR again! Simple and effective access hole to vacuum out the debris in your heater core. Hwy83 Suzuki KZbin channel thanks you for watching! ‪@Hwy83SUZUKI‬
Order Suzuki parts from our Website Http://www.hwy83suzuki...

[@SkitzerPoindexter]

You jumped out, said, "Yo, yo, yo!", and I hit the like button before I even knew what you were going to say. LOL

[@eddiesosa2510]

I did my starter today on my tracker. Thanks for all this knowledge! It’s Miller time !!

[@Hwy83SUZUKI]

Happy we can help out! 🍻

[@duaneshort186]

I had tried this project several times before but was unsuccessful. I kept forgetting the damn beer! Brilliant! Thank you!

[@nunapitchuk]

Love it. You are a natural entertainer. The idea is very cool too. I removed mine to clean it and it was full of all sorts of junk, but it was a big job to get it out.

[@Hwy83SUZUKI]

Glad you're enjoying the video content! Yes the whole unit is a pain to remove but you definitely can get a totally cleaning that way 👍🏼

[@sozekeysersoze]

That was a killer video 😆 always wondered what my heater core looked like on the inside

[@Hwy83SUZUKI]

Now ya know! 😁👌

[@MIKE_WOLF_GR]

​@@Hwy83SUZUKIThanks for that but i would like a video how to replace the air filter at the heater core. Tanks

[@ditship]

Dude.. I don't even own a Suzuki but I love your channel. I've watched 5 of your vids now and I'm now a subscriber.

[@Hwy83SUZUKI]

Glad you are enjoying the videos! I think we need to get you a Suzuki sometime soon!

[@ditship]

@@Hwy83SUZUKI I’m thinking about it. That’s why I checked out your channel. Would be a nice off road beater in the desert in AZ. Anyway keep up the good work!

[@leroys4wd]

love that plow sami!

[@gbtivbay]

Hi Tony, ive just done this to my restored 1988 Sammi here in the UK. What a difference to the heating ! I had a few leaves but just debris covering the fins of the core, i also sucked out some plastic sheeting that had been in for a while, now the heaters too hot on fan position 1 - before fan3 was weak. Thanks so much. I used a 40mm saw & plug. Oh and I had a Stella, cant get Miller high-life over here

[@19dannydude97]

Can you do a video on how you mounted that snow plow?

[@Hwy83SUZUKI]

It is a bolt on kit designed for the Samurai. Yes that is a good video idea!!

[@ZUKME]

Thanks for these videos!!! They are awesome!!!

[@Hwy83SUZUKI]

Glad you're enjoying the videos, thanks for watching!

[@daltonraymond1572]

Love the vids! Really entertaining. Especially the Easter egg beers and the signature outro 🍻

[@Hwy83SUZUKI]

Ahhhhhhhyeaaaahhhhh 🍻🤟

[@Gr8mom2tac]

Thanks for the tech tip. Actually was able to battle snopocolypse 2021 with an actual clear windshield and side windows.. Thanks

[@Hwy83SUZUKI]

Snowpocalypse stands no chance against at the mighty Samurai 💪🏼

[@johnog8358]

Great video! Can you do a video how to remove the dash including the choke and trunk release lever.

[@Hwy83SUZUKI]

We'll try to make a video on that in the future. Thanks for watching! 🍻

[@mathewsren9712]

Excelente video. Gracias

[@Toby-uk9hv]

Awesome! Thanks a lot!

[@Hwy83SUZUKI]

Happy to help out 👌

[@MsStefan94]

Thank you dude for helping us out ❤

[@5870cve0]

Thank you very much for this tip

[@Hwy83SUZUKI]

Happy to help! Thanks for watching!

[@micklaporta4503]

if you blow some compressed air up through the bottom vents while vacuuming it helps , love the channel working on my 87 tintop 4.3 swap

[@Hwy83SUZUKI]

Good tip!

[@paultrimble9390]

Cleaned mine out yesterday. Ah. Heat. Again!!!!!!

[@jessicakirkpatrick691]

Alright I could really use some help I got my dash out of my 1988 Samari now I’m having trouble hooking up the climate control cables to the controls do you have a video showing an install or removal of those flap cables

[@Dust1220]

Do you have a video of how you put the plow on ?

[@evi1dav3]

I did something similar but cut a square hole and patched with gorilla tape. Made an attachment to my shop vac to get into the very back where it was tight with some 3/4 inch clear vinyl tube. It helped immensely with the heat in the cab. Unfortunately my heater box will have to come out to facilitate cleaning of the water separator. Most likely it is full of silt. Water pouring into the cab onto either my or my passengers calf and ankle after it rains isn't a good time. Neither are rusted out floors. Any recommendations on good videos showing the r&r of the heating system? Thanks in advance.

[@kristoffersondomingo1356]

awesome snowplow!

[@Hwy83SUZUKI]

Thanks!

[@rickmercer6437]

So simple looking at a Zuni and the heat isn’t maxing out now I know what one solution might be

[@Carl-zj2vd]

Does this improve air flow from the air conditioner?

[@sebterror]

How to remove the box?

[@TerryBoivin]

Great video series! I could use the flex hoses that run from the heater box up to the windshield defrost. Mine are missing! You got any?? Thanks!

[@shirtlessstella]

This is awesome! There is no heat in my Suzuki 800 hatch so I'll try this out. Any advice or videos issues with when you turn the wipers on and water pours out from under the dash where the fuses are? I'm kind of terrified of pulling the dash out and not getting it back on. Thanks from Australia

[@shirtlessstella]

On an SJ70 tin top

[@regginaldwilliams9381]

Do you have to remove it from the vehicle? Enjoy that Millers and thanks for your videos.

[@CTMadModz]

I’ve done this, but my defrost is still sub par.... it had a bunch of leaves in it from the previous owner, should I take the whole heater core housing apart and make sure the vents aren’t packed full? I can’t see any leaves inside there 🤷🏼‍♂️

[@cozysajan4813]

Just a quick question, I have 1988 samurai with no AC, I am curious to know if I tape bottom air went to get more heat on defrost. Am I damaging the heater core or any part of the blower. Do u have any suggestions bud?

[@richardvalitalo3670]

Open the valve fully under the hood.( on the heater hose)

[@cozysajan4813]

Thanks

[@mikezanassi207]

Do you have to take out the dash to remove the heater box? Say if you had to replace your heater core

[@ashleygrace9618]

Have you got a video on how to remove this heater?

[@MechanicForGMCCars]

Hello sir today I hade unusual problem I took of me wire harnest I was curiuse to see how the 2pin warning lights on buzzer relay is conected and I traced that positive wire to light switch and the other pin from the relay goes to the blower motor resistor so thats where me confusion comes from ??? What has the buzzer to do with blower motor ???

[@louiswooley966]

My blower works great-no heat thou?

[@oczuk32]

Is it possible to remove the blower motor while still being in the samurai?

[@Hwy83SUZUKI]

Yes you can

[@braddahdussifyoumuss596]

About to swap an ac system into my 96 tracker!🤙🏽🤙🏽🤙🏽

[@Hwy83SUZUKI]

Sweet! 👌😁

[@pappawandpaepaesmith837]

Is that heater box hard to get out is there a video or link to get it out

[@Hwy83SUZUKI]

You clean out while it's in the vehicle. Watch our dashboard removal video if you need to remove the heater box

[@pappawandpaepaesmith837]

@@Hwy83SUZUKI I have to get it out to change my core

[@Goodsnout]

How do you do this on a Tracker?

[@ryandreyka]

What size whole saw

[@mattmiller9718]

how the fuck do you not have more views? your videos are not only quality in terms of information. but fucking hilarious.

[@Hwy83SUZUKI]

That's what I'm talking about! Help us share and get more views in the Suzuki community 😁🤟 Glad you're enjoying the videos 🍻

[@RaulSolisJr84]

What is the size of circle saw you used? I'm using the floor plug.

[@Hwy83SUZUKI]

Saw size is stated in video to match factory floor plug

[@jamesdahmer5027]

yea but like how did you get it *out of the vehicle*

[@Hwy83SUZUKI]

You clean it while it's in the vehicle

[@jamesdahmer5027]

@@Hwy83SUZUKI I need to remove the unit to access the heater core, not for cleaning.

[@mjvbhaskar1000]

Hello from India, Does your samurai come with AC too? or its just the heater? Did you try installing AC? Also, can you please post a video of the AC/Heater controls? Thanks.

[@Hwy83SUZUKI]

In the USA air condition was a dealer installed option

[@トラックりふと]

😉👍✨

[@KungLao92]

Mane I’m getting heat from the bottom but it feels like a fan on the dash I don’t get it

[@Hwy83SUZUKI]

Heat is designed to only come out on the feet and windshield settings. Front vents are cold air only

[@KungLao92]

@@Hwy83SUZUKI wow okay didn’t know that !

[@jacobrice5452]

Some compressed air might work better than a stick

[@brockukg]

you are cool as fuck bro!! love from the UK :D

[@wking523]

Miller time

[@Hwy83SUZUKI]

Ahhhhyeaahhhhhh!

[@brandonhookey7654]

No heat November.

[@dovydaskaminskas4227]

Can't you just take the motor out?

[@Hwy83SUZUKI]

That does not allow you to clean the heater box

[@salrivera7578]

Gd job I myself took all that crap out of my Geo tracker as well the air conditioning unit and I replaced it with a gd truck heater and at the same time I put a better stronger alternator more amp in reality I took out a list 30 to 40 pounds of crap that I really was pulling around I don't nd it at all and replace it with 6 pounds or less with a truck heater head my Geo real gd I think all that is weight that hardly get used to be hugging around really my work great the way I build it but like I said my is build old school plus I by pass the coolant meaning my motor run with the coolant faster inside the block and head better for my engine parts kp things running a lot better but my is another level more simple only have what I nd to have the rest is weight and weight is gas price jjjjj 😁 gd job amigo but I like things simple you know the deal mountain build hillbillies ways jjjjj take care gd job amigo