Heating Repair - Always Change This Part

[@HVACKnowItAll]

Get those roll out switches changed folks!

[@serialseatsniffer5610]

Man, Yorks are such piles of sh×t

[@chap3845]

I've been really lazy lately, and have been ordering my draft motors with the mounting plate and spacers. I just put new nuts on. I don't need to bring a sawzall on the roof anymore 😂

[@quadguy1470]

I service and maintain over 30 of these units every month and can not recall a failure of any rollouts or high limits. pilot tubes and venter motors though? That's a different story!

[@GG-sy8ic]

Great video! You're absolutely right about that rollout switch. Also, those little rollouts or high limits in the heat exchanger compartment can create havoc as well. I had to change them out on the coldest day this winter.

[@superiorcomfortheatingairl3373]

Good video, I am a YORK dealer and never heard that recommendation from any training classes I have went to over the past years.

[@gas_man1565]

I change the safeties on them too. build better limits then we wont need to change them out!

[@jaycurtis3092]

Great video, great sound, great production! Thanks.

[@HVACKnowItAll]

Thank you

[@jrh86]

Excellent presentation thank's

[@stephentrask6641]

I always carry 1/4” hard drawn copper to replace the spacers between the motor and plate.

[@HVACKnowItAll]

Nice idea!

[@TheRyansDen]

Woah! Never seen a double wheeled IDM - thanks for the PM tips

[@HVACKnowItAll]

You got it!

[@stevenzachelmeyer2925]

found out years ago after i replaced everything else. Now on inspection I kick or hit the side of a york sunline unit to see if the burner turns off to test for weak roll outs

[@HVACKnowItAll]

Haha that's funny

[@jimbola77]

Awesome Advice partner thank you for sharing!!!!.

[@HVACKnowItAll]

No prob!

[@hughmc5419]

Very mild weather in midwest,me in Chicago,mid 50's yesterday,& warm all the way to the 31'st. Heaters wont be working to hard. Ouch~~∆t $ $

[@crespino1492]

Thank you

[@chriswanamaker211]

Was that a street 90 before the union? Manufacturer piece or...

[@HVACKnowItAll]

If it was it's from the manufacturer

[@ericcancel6946]

This video is exactly what I'm up against when I go back to a call Tommarrow that i was at.i had no spark on ignition on 2nd stage module ireplaced ignition control and still no spark I tried another ignition control that did not have the r1 rollout terminal on it and I had spark ,I checked rollout had continuity so at this point I'm going back with a new rollout switch hopefully that was my problem all along.thanks for video hopefully its a quick fix

[@MrChipBryant]

Good video, great job. Thank you.

[@chrisscerbo5731]

it looks like your driving from the right side of your truck like in the UK . where are you working

[@HVACKnowItAll]

Canada, the camera is just in reverse

[@edilsonserafim4784]

I am currently try to find the schematic for these unit i did not find in the Bluon app can some one help thank you

[@jordanday3426]

I created a tester for these ignition control modules. It was a hobby project. I have a demo on my channel.

[@Luzt.]

Are these backward- or forward curved blades?

[@HVACKnowItAll]

Forward curved

[@Luzt.]

@@HVACKnowItAll Thanks. I make an effort to be able to judge "forward/backward-curved" just by sight and possibly application. I'd always mark old/new fans but some previous guy might have made a mistake.

[@geraldjohansen2421]

Celsius ?

[@bobberger918]

I love when wire ties aren't trimmed lazy 🙃

[@alandobbin2164]

I've had that bite me also. Great tip

[@HVACKnowItAll]

Cheers!

[@jasonsmith5895]

Blow out those pilot tubes with nitro!! Every maintenance!!

[@philipwall1025]

I'll be honest I never had to always change a module every season,with thos particular units and there one of a kind design, pm s are must for maintenance on the crossover tube,the separation between the spark and the crossover is a must ,I would bet the farm that's what u have goin on,very sensitive that design with the crossover tube,spider webs after the summer,or moth nest.

[@HVACKnowItAll]

The video never stated that the module every season. I said the roll out should be replaced on every heating repair and I explained in detail why.

[@philipwall1025]

I use a mirror to visually see spark ,Dont go based on sound,get a visual on your spark use a mirror and visually ID GOOD SPARK.never had to routinely change modules and rollouts,HAD TO ROUTINELY CLEAN ,ADJUST,NUISANCE CROSSOVER TUBE ISSUES TRUST ME DAWG

[@HVACKnowItAll]

The module is not a routine change out, it's not generating a spark. The roll out on York, rtus is a must to replace, they cause a lot of problems, intermittent and direct.

[@superiorcomfortheatingairl3373]

Good video, I am a YORK dealer and never heard that recommendation from any training classes I have went to over the past years.

[@HVACKnowItAll]

Thank you, ask them about it.