Heavy Duty Upgrade for Lippert SlimRack systems.

  Рет қаралды 337

Little Enterprises - Metal and Motors!

Little Enterprises - Metal and Motors!

Күн бұрын

Пікірлер: 9
@TheMinnow101
@TheMinnow101 13 күн бұрын
Outstanding !
@rvlifediy
@rvlifediy 18 күн бұрын
Nice. I will definitely have to do this upgrade for my main slide. My upper and lower slide rails don't seem to be the same length or the installer didn't clock the lower rails with the upper rails right e.g the upper rails have a large bow when fully extended or retracted. Instead of removing all the components and reclocking, could the upper rail be cut shorter after the bracket removal? I need to think about this before I make the order. If my slide is 100% retracted, from the outside, the top of the slide is very tight, and the bottom of the slide sticks out a little bit.
@ralphsarc1471
@ralphsarc1471 22 күн бұрын
Love these. Is there a different design for the upper and lower tracks. I’m assuming I’d need four per slide?
@Little-Enterprises
@Little-Enterprises 22 күн бұрын
@@ralphsarc1471 Thanks. Each slide typically has four rails/racks so you would need 8 to upgrade the whole system. You also need to know what style of end brackets your RV uses. Typically notched brackets are used on the outside and flat on the inside, but each RV is different.
@MrPancake0825
@MrPancake0825 24 күн бұрын
What about galvanic corrosion?
@Little-Enterprises
@Little-Enterprises 24 күн бұрын
@@MrPancake0825 thanks for the question! The aluminum end bracket is going to be hard anodized that will break the possible conductivity between the nickel plated rail end and stainless screws/springs. The other possible areas are between the nickel plated rail end and the anodized Lippert rail and the stainless pins. Nickel is the less noble metal, so that would be the first after many years to show signs of corrosion, but because the surface area is so small, it is not a electrical part or submerged in salt water, the rest of the Lippert system will fail first. I will supply a small tube of dielectric grease to keep things lubricated which will also prevent corrosion. The parts will have a lifetime warranty, so the customer can request replacement if by remote chance any of this happens. Thanks for the great question!
@SteveKramer-x4y
@SteveKramer-x4y 13 сағат бұрын
Where do you buy these and how much?
@Little-Enterprises
@Little-Enterprises 4 сағат бұрын
www.little-enterprises.com/store/p118/RV_Slide_Rail%2FRack_Heavy_Duty_Upgrade_Kit.html#/
@unwired1281
@unwired1281 21 күн бұрын
Lippert should be recalling their junk and furnishing this upgrade. They are a disgrace.
Broken RV Slide Lippert SlimRack Failure!  Quick and Easy fix.
12:33
Little Enterprises - Metal and Motors!
Рет қаралды 7 М.
The Hinge / Pivot - 6x6 Forwarder Ep.8
26:03
Donn DIY
Рет қаралды 15 М.
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 45 МЛН
Aluminum Replacement for the Plastic Lippert SlimRack End Bracket
3:13
Little Enterprises - Metal and Motors!
Рет қаралды 343
New ShopSabre IS-M 408 CNC router - Part 1 - Delivery, Unboxing, and Setup
19:56
Little Enterprises - Metal and Motors!
Рет қаралды 2,5 М.
The New IFD-175 AP Inline Filament Dryer
2:00
Thordsen 3D
Рет қаралды 4,6 М.
10 Engine Oil Myths Stupid People Fall For (Don't Be One of Them)
11:53
John Deere THREATENED Farmers & They Totally Loses It!
24:45
Top4Cars
Рет қаралды 4,4 М.
sawing three cherry 6x6s # 657
23:06
mark galicic
Рет қаралды 23 М.
Norweld Cylinder Install
7:34
1Key Company
Рет қаралды 53
Explore Forestry 🔧 Machines That Bring Amazing Efficiency 🌲
16:02
Making a BMW M5 Coffee Table!
9:15
Little Enterprises - Metal and Motors!
Рет қаралды 142
Did We Just MESS Up The Articulation Geometry??
22:33
Welker Farms
Рет қаралды 198 М.
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН