Heavy Duty Upgraded Flex Cable Installation Proboat Ul-19 Rc Hydroplane

GET BOAT HERE. UL-19
www.avantlink....
UPGRADED .187 CABLE HERE
www.offshoreel...
5MM TO .187 COLLET
www.offshoreel...
Thanks for watching ironclad rc tinker test and tune everything
Personal contact information [e-mail]

[@jefferyferguson9232]

Hate to admit it sir, I usually make all my purchases from ose, zippkits, or gizmo. Nobody had the cable I needed. One of your subscribers mentioned seducer. Low and behold they had what I needed. Thanks to you and your subscribers. thanks sir. You are awesome.

[@roadstar499]

I learned a lot here... never had to cut a drive dog notch,but now if i need to i feel it will be very simple...thanks

[@douglosier1208]

My son wanted a rc boat I order the boat and I saw your videos after lol holey !! Jesus Christ he is only 9 yrs old having fun together great hobby for both and Tks for the mod info I’ll send you a video of it soon😉

[@IRONCLADRC]

Good luck with the maiden. She runs excellent stock on 4s...... 6s she gets warm proboat recommends 4s operation 6s capable, best on 4s. Plenty fast. Oh yea WELCOME to the "BOAT GANG "

[@NeilHodgsonDARKHOURS]

What I have done for years is after placing your prop onto the drive dog cut a small peace of fuel line the length of the drive dog teeth next up to the back of the prop then the nut to just touching the fuel line. Holds the prop onto the drive dog but it disengages if you hit anything with that expensive nicely sharp pend balanced prop u put on. Then it reengages right after by the fuel line. I have saved a lot of props doing it this way. on your shorter props no shims needed or moving drive dog back. like 5.52 min mark. Just what i do. but good video.

[@IRONCLADRC]

Thanks for the tip brother

[@timturley7573]

Glad to see you finally got the U-19. I have had my about a year. It's super fast boat

[@remkojerphanion4686]

"Stick around guys, you might as well... you're here!" I like that 😄 Cool video BTW!

[@nossrc5638]

I used to buy my cables at OSE but many times they are out of stock, now I buy cable at Seaducers boat and I do it myself loke you did

[@jamesstuarttolford1978]

As I keep saying, you ROCK, Bro. Learning tons from you, Sir. Thanks

[@sebastianobeltrami8742]

Have a nice day man, 🤣🤣☺️🤣☺️☺️ after your happy meter and funny drill

[@dimalranasinghe8152]

Thank you very much.

[@Aleks-gt1ki]

I learned so much! Thank you for all these kick ass videos.

[@leddiablo101]

Nice one 👌🏻 Super keen to get the blackjack in the water. Waiting on my speedy to arrive from the states and she'll be ready to rip. Love your work

[@thomasbradfield5534]

Nice info brother , I know the feeling from one shop and then going to the house your not alone lol great video B !!!

[@kylefletcher1002]

Hahaha dude when the blade broke I was like ahh hell 🤣🤣🤣

[@schoenmakerijjohnmoes1846]

Great tips thx mate

[@jefferyferguson9232]

Very Informative. To bad you purchased the last 3/16 cable.....ROFL....

[@IRONCLADRC]

He should restock shortly

[@jamesstuarttolford1978]

Just got mine, almost scared to open the box. Jitters. 😂😂😂 lol

[@IRONCLADRC]

You'll love it brother trust me

[@jonathandemaria1865]

I use a chuck I took off a dead drill to make my cable cuts

[@IRONCLADRC]

I might steel your idea. Lol.

[@remkojerphanion4686]

That's a good idea!

[@shanehoule9477]

Sweet man bad ass

[@roadstar499]

ps you need to file down flat that yellow piece on your tape measure..lol

[@JimmyB55]

Hit something and broke my steering servo in my 19. Are your upgrades for more speed or holeshot. All I've done is split the cooling and dual return cooling lines

[@ifly65]

Zipp has the cable in stock. I like your flat spot wood block holder. Im still looking for your video that shows it, how do you remove the Teflon tube?

[@IRONCLADRC]

I use a pic tool with a curved tip reach in there puncture the Teflon liner and pull it out or you could put the flex cable in use the shaft to pull it out, from the inside

[@yevsnyder5387]

This boat is nut have to upgrade everything lol

[@IRONCLADRC]

Not really. If you run her on 4s she's ironclad stock. But I'd you wanna run 6s yes she needs alot of work. Worth it in the long run.

[@yevsnyder5387]

Hello how you been question? I broke my shaft cable stock first run on 6s should have known better same thing plasik straw melted lol. OSE is out of stock on 187 do you know sny other olace online yo get one thank you i learned alot from you

[@IRONCLADRC]

I got mine from zippkits.com or wholts rc boat supply

[@Buellerwtfman]

Good timing, getting ready to do the same swap out on my ul19. Any tips on getting that stuffing tube out? I feel like you said it in another vid, but cant remember which one lol.

[@IRONCLADRC]

I usually cut ST as close to the hull as possible then use a drill bit that fits perfectly inside the ST drill the tube until the tube heats up the glue, usually when the glue heats up it will break the stuffing tube loose so you can pull it out the boat

[@Buellerwtfman]

@@IRONCLADRC Thanks for the reply, but I have to make a correction to my question. Do you have any tips on removing the stuffing tube liner? Really sorry about that

[@IRONCLADRC]

I use a extra long pick tool that has a rounded off tip kinda like a tiny hook that I use to grab onto the liner from the inside it will hook the liner at the end or press it into the liner mid way and pull out

[@Buellerwtfman]

@@IRONCLADRC Thanks B

[@hoodatdare7039]

I DIDENT SEE YOU SOLDER THE END OF THE DRIVE SHAFT ? DID I MISS SOMETHING ?

[@IRONCLADRC]

I didn't solder it yet. Actually slipped my mind

[@PigglyWigglyDeluxe]

What happened to the fins?

[@IRONCLADRC]

Broke off in a flip. They don't float lol.

[@theironman_man291]

Hey just curious if you would be interested in me make you a intro for your vid’s I’ll do it 100% free let me know PS love the videos

[@IRONCLADRC]

Thanks for the offer brother. I really need some one to make badges and emojis for memberships and supers? I don't know how to do it. If you want to make an intro I'd be glad to take a look at it. My email is [e-mail]. email me any time so we can talk about it

[@bobmarley6968]

Do you have a 160 amp on the sonic wake?

[@IRONCLADRC]

No the v2 is 100% stock only thing I've upgraded is the stinger

[@bobmarley6968]

I got 160 amp for it .. will it work?

[@norcalrc]

Remember Big b , Jesus Christ is not a swear word! 🚤💯