Laser Engraving on Leather - Is a Laser Engraver worth it? My leather craft studio vlog

[@cliffcotter9764]

By the way. The work you doing and the items you are creating are beautiful.

[@hedgecomber]

That’s kind of you Cliff, thank you ☺️

[@2kattt]

Amazing to see the new ideas are coming along sweetie xx

[@hedgecomber]

Thanks petal 🥰😘

[@sueb8270]

A very thorough review Jane! Looks like a great bit of kit 😊

[@hedgecomber]

Thank you Sue! I’m surprised how much I enjoy using it ☺️

[@lilychristoffersen3047]

This was so informative! Thank you!

[@jeanadamsick9854]

HEY THERE JANE, GOOD INFORMATION FOR THOSE PERSUEING THIS LINE OF CRAFTING!! LIKE THE BOOK MARKERS!! I'M GLAD YOUR GOING TO SHARE YOUR UPCOMING CRAFT SHOW. Do take care. Fl., USA

[@hedgecomber]

Thanks so much Jean ☺️

[@elizabethfinch2150]

Brilliant video. I'm looking at going down this path but know nothing about laser cutters. Could you tell me the largest size project this machine is able to do. Thanks

[@brotherscoyote]

You are an absolute delight.

[@barbblack7825]

Best of luck at your craft fair. I have a 10 watt XTool and I love, love, love it. One day I will move up to their higher watt machines but one day at a time. Thanks for sharing.

[@hedgecomber]

Aren’t they brilliant Barb? I love what this thing can do!

[@Drubeez]

What brush do you use for tracing if you don’t mind! And thank you for this video

[@ninatheambulancecamper]

It’s great to see you doing so well with your laser, you are doing what I wanted to do with mine. But instead it’s sitting there gathering dust unused for ages now. My brain is all over the place at the moment and right now it’s focusing on the gaming stuff rather than the laser cutting or the photography. I don’t have to put any effort in to the gaming, it’s just sit down and play it. The photography and laser all require a lot of effort and I’m just not there yet. I’ll give it this year to see if I use either, if not I’ll sell it all again and see where my creativity wants to go if it comes back any time soon. Keep up the good work Jane, and good luck at the craft fair xx

[@hedgecomber]

Thanks Damon ☺️ Passive hobby’s definitely have their place, and with what you’ve been through this year the gaming sounds just perfect ☺️ Be kind to yourself buddy, your creativity has just gone on holiday for a while, but I know it’ll be back and firing on all cylinders when you’re ready. Love to you both 😘

[@denisestravelsandexperiences]

I have been thinking about getting procreate (and therefore an ipad) for a while to make my artwork easier to put into print! You make it sound easy so I might re look at it.

[@hedgecomber]

Oh Denise, I LOVE THEM!!! As with all tech stuff it takes a bit of learning, but if you have the interest you’ll learn it all in no time. And the ipad replaced my laptop, I use it for everything now and a laptop feels totally alien to me - I keep whacking the screen and wondering why nothing happens! 🤣

[@ChrisCoolmagicEdwards]

Thanks for the card case! It’s fab, even with the extra holes!! Now we need to decide what to laser engraver on it!!

[@hedgecomber]

Yes we (you!) do! Let me know when you have a plan and we’ll get it finished, and thank you again my little tech geek buddy ☺️

[@thornhedge9639]

Charming as always!

[@hedgecomber]

Thanks thorny 🤩☺️

[@jonnypickett2546]

Super cool tool !

[@hedgecomber]

🤩

[@rosseveritt8250]

Excellent review Janey. Very interesting, I learned stuff so that’s always good. Love the bookmarks. I may be contacting you about those. 😅 Thx for sharing this video. 😊

[@hedgecomber]

Haha, bless you Ross and thank you 🙏 If you can make it down this way I’ve got a market coming up in Lerryn this Saturday, one in Charlestown and another in Lostwithial soon too if you’re up to the journey. it’d be lovely to see you again ☺️

[@rosseveritt8250]

@@hedgecomber I would love to but my back strongly disagrees. 😅 I will look forward to any videos of the mentioned shows. I have DM’d you regarding the lovely bookmarks. 😊

[@hedgecomber]

Your back is very naughty huh? Hope you can get it to behave itself soon buddy xx

[@JPLamoureuxsTravels]

❤ lush kit hun loving the leather goodness 😂❤😂x

[@hedgecomber]

Thanks buddy! 🤩

[@zelphiaellerson6283]

Good Luck @ the craft fair!!!

[@hedgecomber]

THANK YOU!!! 🤩

[@ronnyi3714]

Hi we're looking for laser engraver - but we want to do a lot of small wallets at the same time - pls show us how

[@ShopSoothi]

How do you determine the distance for the leather using M1 Ultra?

[@cliffcotter9764]

Hello. I quite enjoyed your video on laser engraving leather. It appears that you have only now had your XTool S1 for a number of months. As I am considering purchasing an engraver for leather working, I am interested to know if you are still satisfied with it's results. Any recommendations or suggestions you could pass along would be very much appreciated. Thank you. Cliff

[@hedgecomber]

Yes, very much so. I find it quite intuitive to use (at least when I got over the initial 😱 factor!). The results are always stunning and I find the lasering process quite meditative. I have to stay near the machine whilst it’s running (for safety reasons) so have to just focus on that one thing for once!

[@SDEANO99]

Great video, future work opening in talking books 😉😎

[@hedgecomber]

☺️

[@nice2nettles]

I have studio envy! This might be a cheeky question, but - could you share how you package your bookmarks? I'll be selling Fair Isle bookmarks in my new shop, but I can't find any outer packaging that would be good for bookmarks without creating a lot of unnecessary packaging waste! Even just padded envelopes - the ones that are long enough are far too wide. Just wondering how other bookmark makers send them!

[@hedgecomber]

I haven’t sent any yet so I have no clue 🤷‍♀️😆 I’m thinking a regular envelope with a backing board but I’d be interested to know what you end going go with too 👌

[@nice2nettles]

@@hedgecomber Haha, no worries 😁 I've just found some 22x11cm 'do not bend' envelopes on Amazon, so going to give those a try 😊 Good luck with yours, they look fab!

[@hedgecomber]

Thank so much, you too!

[@moodymakes]

Lovely video

[@hedgecomber]

Thanks Moody! 🥰

[@cynthiamccoy845]

Great video! I'm a printer by work including laser. We don't laser leather, but my boss wanted me to try it. The smell was awful even though the machine is vented. All that to ask, does engraving leather smell badly? Thanks.

[@hedgecomber]

Hey Cynthia, People do say it stinks, but I haven’t found to to be the case. It smells of smoke, yes, but not the burning flesh smell that people talk about. Also, never laser chrome tan leather, the fumes are so toxic - always look for veg tan (or vegetable tanned) leather for laser work. Although I tend to assume that all smoke produced by a laser is toxic, so I try to avoid breathing it in at all costs. Also I think it depends a lot on the style of laser - this one is enclosed, and the pipe vents it directly out of my external wall. If you used a smaller, more portable machine that wasn’t enclosed, you’d have to use it outdoors or in a shed, and possibly wear a mask.

[@SCARFACE69247]

12:12 Where do you get those leather coasters from?

[@mrock1167]

What leather do you use? Curious of weight and if it’s pre-finished or do you dye? Thanks for the info and time.

[@hedgecomber]

Hey mrock, I buy ready dyed 2-2.5mm veg tan Italian leather with a gorgeous pull up finish ☺️

[@mrock1167]

@@hedgecomber Thank you. I’m new to leather and was curious what you used for the bookmarks. It’s something I am interested in producing to see how they sell.

[@hedgecomber]

Oh, apologies, the bookmarks are thinner leather - I found the 2.2mm was just too thick for my liking. I would recommend buying a small pack with a few pieces of different weights of leather in as it really helps you visualise what thickness you’d prefer for each project x

[@anitafloydsarratt7487]

you can use the same stamp for any letter you need, when that letter comes up, dont need to buy more

[@SaintTrinianz]

Last night I dreamed about a machine. I was told that if I could figure out how to operate it, I would have the job! Later, I was watching YT and saw the machine! It was a lazer engraver...