Helical Piles and Deck Framing - THE MOUNTAIN PT. 1

We are on a new project and we are super excited for this one! We are starting off by installing our helical pile footings and building our deck framing. This deck is nearly 1200 square feet, which will be our largest we've ever done! Make sure to follow along this series as we build!
OUR FAVORITE TOOLS AND ACCESSORIES!
www.amazon.com...
GOLIATHTECH HELICAL PILES
www.goliathtec...
PROWOOD MCA TREATED LUMBER
www.prowoodlum...
#building #deck #backyard

[@CompletelyObsorbed]

Your videos, crew, attitude and projects are all top notch! Thank you for the amazing content!

[@THEpremieroutdoor]

Glad you like them!

[@stacyadams8265]

Being able to seamlessly walk out of the house to the outdoor space makes it feel like an extension of the house more than people realize. Nice.

[@mikesmithh]

Round Earth. Going to come out nice.

[@THEpremieroutdoor]

You seem like a sensible man, mike 🤣. We’re pumped for this one!

[@rmsanfor]

Man. Great video

[@tonynewton7902]

Start square end square. Great work as always guys. 👍👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@THEpremieroutdoor]

you know the deal Tony!!

[@RossMalagarie]

Dang dude thanks so much for the videos, the explanations, and the start to finish content. I am a DIYer and love getting ideas for projects and your work is top notch. I appreciate your explanation on how "torque" post can be better for holding a load than cement.

[@THEpremieroutdoor]

glad you liked it my friend!! Happy to hear you picked up a couple tidbits from it!

[@Hampchiller]

Round😁. You guys all do great work!

[@THEpremieroutdoor]

appreciate that my friend!!

[@maxochavez5854]

Amazing work man. I been framing for a 3 years , walls windows rolling trusses on models homes just changing a few details here and there. Just got a new job which is mostly decks and remodeling, stoked to be watching you guys. Excited to learn a lot from you dudes! Much love from Vegas !

[@THEpremieroutdoor]

That is awesome! Really appreciate that my friend!!

[@Jmramirez427]

Thank you! Missed this. Thank you for more details and specifics.

[@THEpremieroutdoor]

Glad it was helpful!

[@jonesboy201]

Impressive, as always.This is going to be an epic project

[@THEpremieroutdoor]

Thanks a lot!! I’m really pumped about this one, lots of cool stuff going in on this one

[@sgwsteve1665]

You guys have a great channel Keep up the amazing work

[@THEpremieroutdoor]

Thanks a lot Steve, very much appreciated!!

[@giantkillin8278]

nice.!!

[@MrMikeyBmore]

Great content guys !

[@THEpremieroutdoor]

Thanks a lot!!

[@gerardosantiago4115]

Team round earth 🌎

[@THEpremieroutdoor]

round earth for sure 🤣

[@tacticaljody4381]

Great stuff!! ❤

[@THEpremieroutdoor]

thanks as always my friend!

[@NAPREECHA]

มาดูวิธีทำบ้านด้วย🏘🏠🏘

[@kevinwise982]

Flannels are definitely still cool.

[@THEpremieroutdoor]

Right?! Ant doesn’t know anything about fashion 🤣

[@ThisMyMemeAccount]

Would love to know price p sq foot or overall costs and material breakdowns.

[@revfred2008]

I love my flannels.

[@THEpremieroutdoor]

right?! definitely still in style, ant doesn't know anything

[@a-carpenter9229]

I bought a Bosch rotary laser level kit that came with that same receiver and hated the thing. I upgraded to one that had a screen with arrows and solid line on it. It's so much nicer to use than the one that came with the kit

[@SirduteYT]

Man I would love to be in this field of work

[@THEpremieroutdoor]

its a lot of fun, most of the time lol

[@UnforgivenLlama]

That torque comment is a gold tip

[@THEpremieroutdoor]

really is a good little tidbit of knowledge!

[@jmert_5859]

@ 18:40 Like the way y'all explain things.

[@THEpremieroutdoor]

Really appreciate that my friend!!

[@eco_guardian]

I like big decks, giggle.

[@THEpremieroutdoor]

Big or small, we like them all!

[@joehowarth8093]

Round for sure….😊 nice job..looking for ward to the rest of the videos!!

[@THEpremieroutdoor]

thanks Joe! We're really pumped about this project!

[@69mjar]

You're the vest!

[@THEpremieroutdoor]

I'm so happy you invested the time to watch the video!

[@mikez4132]

Good stuff. Love the projects, info/tips and the helical content. Im still getting my business going in PA but tbh your channel is what I use to show other contractors piles. Still trying to get people past the idea that 3 extra days of work, cement, labor, holes filling with water and inspection delays is the prob not best way to do a footing...lol.

[@THEpremieroutdoor]

It’s always hardest to get someone to use them for the first time, myself included, but once they realize how much time they save they’ll never go back!

[@mikez4132]

@@THEpremieroutdoor For sure. Thanks for the reply!

[@dougfields23]

for us in the midwest, it's code to run blocking over the beam. personally I like the rigidity of midspan blocking every 4-6 feet especially with composite decking.

[@THEpremieroutdoor]

interesting! Its definitely better to go overboard with the blocking than not enough!

[@greghorne8678]

Hot tip: find your finished floor heights by measuring down from the windows. You will need a tape measure for this.

[@THEpremieroutdoor]

but the sill isn't the same height on both sides, so you have to put a level hanging out both sides of the window, and for that we'd have to track our muddy boots inside!

[@stay707]

I enjoy watching your videos. I started during covid and still enjoy them. Q: how would you attached a ledger board on a stucco exterior? All you videos are on homes that don’t have a stucco exterior and I wonder if they would be handled the same. My home builder didn’t remove the exterior and attached the ledger directly in the stucco which seems wrong but that’s how it seems to be done in my area by most builders.

[@greghorne8678]

Properly applied stucco is an excellent building envelope. No sense cutting out for a ledger. The best way to attach a ledger is to space it off about 3/8 so the back and ventilate and lag through the stucco to the house framing with polyurethane sealant in the the lag holes. Much more water proof than a flashed ledger cut into the stucco.

[@arnaudsimon7921]

Love your videos man ! The crew, your work and ethic are top notch !! Spending my time on all your videos. If i may ask few questions: Are you using yellow cedar ? is it better than pressure treated ? where do you find it ? Also, how do you find an the helical operator / provider ? Would that also work in a very rocky place? Finally, I had in mind that space recommandation for Trex or deckorators was 12" wide but most of the time you're at 16". Are you using a stronger/less flexible composite ? Thanks again man ! Luv your stuff !! Thanks for all your work !

[@dlfendel2844]

Love you guys! Tell me--that fireplace vent? Do you have to re-duct/vent it UP to avoid your new deck?

[@THEpremieroutdoor]

yup! it'll go through the new roof

[@srihcadi5383]

While I understand the design showed no "structural support" around the fireplace, I don't understand why you would need a triple joist on either side and a quadruple header. I didn't see anything bearing on these areas so why wouldn't doubles be enough?

[@alexill]

Awesome video Sean! Really enjoyed this one. Any chance we can get a guest appearance from scooter or pat

[@THEpremieroutdoor]

Maybe one day!

[@sigunz]

How are you guys building flat decks if the earth is round :)

[@UnforgivenLlama]

Does Kat hold tape measures and film?

[@UnforgivenLlama]

How do you get paint off of your tape measure?

[@mrmusic21]

There’s only one right answer: team round earth

[@gharbinizar7238]

hello, I encourage you and thank you for this beautiful work, I follow you from Tunisia. I ask you is it possible to give me an idea for my garden seen that I find a lot of difficulties and thank you in advance. very nice afternoon

[@THEpremieroutdoor]

So glad you like our videos!! I hope you can get some inspiration for your own backyard from us!

[@samuelhiggins5188]

Does the house wrap count as flashing out there? I've always figured it would be fine but the inspectors here make me cut it out and put vinyl/comparable

[@THEpremieroutdoor]

no it doesn't count as flashing so we cut it above the ledger and then tuck our metal ledger flashing behind the house wrap

[@samuelhiggins5188]

@THEpremieroutdoor different jurisdictions are wild 😂 here we have to have flashing behind ledger, then also overtop.

[@UnforgivenLlama]

Did you hear they aren't making 12' tape measures any longer...

[@mac8179]

I’d be interested to know the cost of some of these builds. $75-100K? The piles alone must be $400 per (labor and material) x 23 = $9K+

[@THEpremieroutdoor]

this one will probably be closer to 200k, we have a ton of features going in this one!

[@mac8179]

Phew. The cost of some houses in the Midwest.

[@andrewverburg3718]

How much does a project like this cost overall?

[@THEpremieroutdoor]

This one has a lot of details and features going in so it'll be somewhere around 200k

[@Ceeloy]

bhaha that intro

[@THEpremieroutdoor]

totally hidden behind Tony 🤣

[@UnforgivenLlama]

Ok... Ryan Homes, go or no go?

[@splanzza]

Flat earth 4 life. And flannels are IN most definitely. Tony should leave fashion advices to Mobile Command Center executives. Looking forward to some longer videos in this age of nonsense shorts. Go POL, Go! 🧨🧨🧨

[@THEpremieroutdoor]

loads more long videos upcoming!!! I agree, shorts suck, I wish KZbin wasn't pushing them as much. And you're right, Tony doesn't know anything about fashion!!

[@splanzza]

@@THEpremieroutdoor … and my “flat earth 4 life” is a joke.

[@Marine-wj4jv]

How's the new trailer on this project?

[@THEpremieroutdoor]

its working out pretty great so far! Time will tell if we need to make some adjustments to it

[@smcox1991]

“As flat as the earth” 😂

[@Tom-sd5ru]

Everybody got it wrong, the earth is square 😂

[@THEpremieroutdoor]

Mind blown 🤯🤯🤣

[@UnforgivenLlama]

Flat earth people are hot

[@THEpremieroutdoor]

🤣🤣🤣🤣

[@RossMalagarie]

Are we flat earth or round earth people? Easy, when you put your drink on the ground does it roll away or does it sit flat? So the earth is flat. Your welcome 😁😁👌👌

[@RiffleVFXportfolio]

If the Earth is flat, then why are there hills

[@RossMalagarie]

@@RiffleVFXportfolio if the earth was round then the hills would roll off the ground but since its flat the hills stay and don't move.🤔😎👍

[@RiffleVFXportfolio]

@@RossMalagarie damn, you got me there. BUT if the earth was flat then why do I keep losing my balance every time I get drunk

[@RossMalagarie]

@@RiffleVFXportfolio Hummmm......I'll have to do some research on the subject and get back to you. *grabs bottle of bourbon*

[@RiffleVFXportfolio]

@@RossMalagarie hey where you going with that

[@JamesLJesus]

Flat Earth.

[@THEpremieroutdoor]

seems flat where I'm standing 🤷‍♂️

[@JamesLJesus]

@@THEpremieroutdoor Have you looked into it?, and no I'm not talking about the Flat Earth Society or what you can find on KZbin.

[@shanew7361]

No roof or shade over bar area lol lame design bro they must've been cheap or low budget 🤣 an all siding house 🤮

[@THEpremieroutdoor]

hahah bro it would have been like a million dollars to roof over this whole thing, you'll change your mind once you see it finished!