Hi . I got an image from the support but I don't know what password and the user wants it in the BalenaEtcher application at home, it doesn't work via the link
@chspotato47742 жыл бұрын
Is my card corrupted if I get an error when I pair to my hotspot? If it is, could I recover it? Also when windows asks me to format the SD card should I click OK?
@eigentech65672 жыл бұрын
most likely yes, even if it happens after waiting for 30 minutes or so. Yes, you should reflash it. No. Follow the exact steps I have shown.
@peterlaidlaw86552 жыл бұрын
Thanks for your content :). I have a LoraWan Hotspot from RAK with the same hardware as their V2 Miner. Do you know what will happen if I boot it with the Helium flash. Would there be a way to turn it into a properly authenticated MNTD miner?
@mrsatisfyingworld29952 жыл бұрын
Rak Miner Onboarding address is invalid problem please solved? Please 🙏 solved and reply me
@Bloggins772 жыл бұрын
I just tried flashing my new 128gb SD card twice and it said the flash failed both times. However when I look at the partitions it looks like everything is there on the drive. I've seen other people with this issue and they were told that there would be no issue with the flash. Are you able to confirm this? Also is it okay to do this first thing before setting up the miner for the first time?
@eigentech65672 жыл бұрын
If it failed at the stage of "verification", it could still be fine. I would suggest doing the onboarding using the existing card first and then swap out with the new one.
@nilarmstrong3 жыл бұрын
Can you make a rak replacement
@eigentech65673 жыл бұрын
What do you mean? This video is made for RAK.
@sayefzolfikar36472 жыл бұрын
Great information, can we do the same with bobcatminer
@eigentech65672 жыл бұрын
I think no as bobcat has an emmc card
@oceanforward3 жыл бұрын
Coul you make a Nebra replacement method, thanks!
@eigentech65673 жыл бұрын
I think Nebra doesn't work that way. It always downloads updates from its own server.
@Rafikhan-mm7ow2 жыл бұрын
Shows disk data not available on diagnostic
@eigentech65672 жыл бұрын
If it continues to happen then might indicate a corrupted SD card
@javakhi51892 жыл бұрын
can i use extreme card not high endurance?
@eigentech65672 жыл бұрын
Yes you can
@kripalsinghrathore62913 жыл бұрын
Hi bro how to find clodpi ip address? And my hotspot still relayed open port 44158 2 days what happen?
@eigentech65673 жыл бұрын
I can log into your router and find the IP address from the list of connected devices. Check if 44158 is open portchecker.co/
@abhishekprabhakaran2 жыл бұрын
What is the config of your system ? Just curious
@lucasshires59222 жыл бұрын
Hey my outbound and inbound are fine but my sync is stuck at 0% for 2 days and now just saying it needs attention what should I do?
@eigentech65672 жыл бұрын
if the problem persists even after rebooting the miner, it might indicate a problem with the SD card
@varunbhati74283 жыл бұрын
helium by bgc promised to bring a 9 dbi antenna in 5000 INR on the website. I desperately need it for my suburban area.
@nx38162 жыл бұрын
Hi, is did needed for Nebra too?
@eigentech65672 жыл бұрын
I am not sure. You can check Nebra discord discord.gg/xWPDTj5ufx
@juanallendyperalta3 жыл бұрын
Hello there I just did the sd card upgrade and now it won't let me do the diagnostic The red light is on but nothing else IDK what to do
@eigentech65673 жыл бұрын
That usually indicates some problem with the flashing. Are you using a macbook? Can you check the file system of the SD card after flashing - is it FAT16 or FAT32?
@varunbhati74283 жыл бұрын
the order on cloudpi was stock out within 10 mins today ... but on helium by BGC its unlimited ordering since yesterday ... wondering which one is a better device Sensecap M1 based on raspberry or the cloudpi pro... ?
@eigentech65673 жыл бұрын
hardware wise both should be similar. I am not sure how well the updates will be maintained.
@mhmm20053 жыл бұрын
How regularly we should expect to receive HNT from our hotspot? I can see it s flat for couple of hours and after that a few HNT reward received....
@eigentech65673 жыл бұрын
It mainly depends on the frequency of witnessing other beacons.
@lisab95393 жыл бұрын
Hello. Rak v2 When I run diagnostics has been showing x on inbound and outbound for over 1 week. Disk says OK but nothing I do has worked. Paired with Internet ok but crosses still remain. HELP PLEASE!!!!
@eigentech65673 жыл бұрын
If you have already restarted it, maybe try to change the internet connection from ethernet to wifi or vice-versa.
@44Caliberlove3 жыл бұрын
Thank you for all your great videos. I am at a loss with my Rak Miner. Is there anyway you can help me troubleshoot it?
@eigentech65673 жыл бұрын
Take a look at this troubleshooting video kzbin.info/www/bejne/aWPZf4uZpLGibLs
@44Caliberlove2 жыл бұрын
@@eigentech6567 I looked at all of them lol I cant figure it out. Its a new Rak. Hotspotty is give me Miner:No listen address found Blockchain:No listen address found
@eigentech65672 жыл бұрын
@@44Caliberlove what is the name?
@44Caliberlove2 жыл бұрын
@@eigentech6567 Happy Sand Mole . Im getting different results from different site so I’m not sure what do it. Now it says its syncing but no Inbound yet it is not relyed. Ping test on Helium Status is good but Hotspotty no response.
@derrickdiaz37372 жыл бұрын
I really enjoy your content. Can you make a video that breaks down HIP 54 & 55 so we can make an informed decision on the vote?
@eigentech65672 жыл бұрын
Yes, I have a plan to make it but time is too short. Let me see.
@derrickdiaz37372 жыл бұрын
For the sake of time. What’s your opinion on the two votes? I’d still like to a video on the break down.
@eigentech65672 жыл бұрын
@@derrickdiaz3737 Here the video kzbin.info/www/bejne/g6e5YmSpiseLlZo
@serg.b64843 жыл бұрын
Hello. I have been subscribed to your channel for a long time. Thank you for the video. Sensecap hasn't been working for me for 4 days - "the blue light is flashing" and the miner is offline. Tried rebooting once a day, doesn't help. Please help me understand the cause of the problem.
@eigentech65673 жыл бұрын
Check if this page can help you www.sensecapmx.com/docs/sensecap-m1/troubleshooting/
@r6guy12 жыл бұрын
do I need to extract the files, it automatically extracted. is this ok?
@eigentech65672 жыл бұрын
You don't need to extract. The software does all the job
@r6guy12 жыл бұрын
@Eigen Tech thank you for reply, also I one miner worked fine and 1 miner will not connect to Bluetooth, any suggestions. much appreciated
@janroyland35243 жыл бұрын
Can you show the steps and what is needed to copy a mico sd card and at the same time go from 32 GM to 128GB?
@eigentech65673 жыл бұрын
If you mean cloning, I will soon make a video on that. Right now, I do not have the tools.
@WassupFred11 ай бұрын
Great video buddy!
@fracichi3 жыл бұрын
Is this apply to other hotspot as well or only at RAK miners?
@eigentech65673 жыл бұрын
I am not sure about hotspots other than RAK, MNTD and OG
@serg.b64843 жыл бұрын
Thank you for your answer. But the link you sent me does not contain an answer to my problem. Good luck.
@eigentech65673 жыл бұрын
I do not have a sensecap, so I can't guide. Maybe you can check sensecap discord channel
@nacirsaadsaoud72033 жыл бұрын
Any way to SSH into a MNTD miner? Great Video btw!
@eigentech65673 жыл бұрын
I think RAK doesn't allow that. Thanks
@cheddymatt2643 жыл бұрын
After I followed these instructions, my new SanDisk 64gb was flashed successfully but when I go into the disk info. it says it's formatted to FAT16 and not 32. I'm using a Macbook but any help would be great. Thank you!
@cheddymatt2643 жыл бұрын
To clarify - the upgraded SanDisk card I purchased is the one Helium recommended from Amazon
@eigentech65673 жыл бұрын
Yes, that card should be fine. I am not sure if FAT32 vs FAT16 will make a difference in this case. Did you try putting it in the miner?
@cheddymatt2643 жыл бұрын
@@eigentech6567 Yes and am still getting the green light. The flash drive came in the mail yesterday and I followed your instructions today. It does show FAT16 on the drive info after flashing
@cheddymatt2643 жыл бұрын
Also unable to “Pair” the miner now?
@eigentech65673 жыл бұрын
@@cheddymatt264 there could be two reasons - either the miner doesn't allow FAT16 or the snapshot used is corrupted, maybe try the exact version I used
@professorfaty42753 жыл бұрын
What's the most effective mining brand.
@eigentech65673 жыл бұрын
all miners work the same way, get the one you like
@anugauravanu3 жыл бұрын
Hello Roy, Can you please tell me, between SenseCAP and ClodPi - Which Helium Miner should I plan for ? As you know the technology more then you are the best person to answer this.
@eigentech65673 жыл бұрын
all miners perform the same calculation. So, whichever is easy (faster) to get.
@anugauravanu3 жыл бұрын
@@eigentech6567 I am getting Clodpi in a weeks time as they are opening their booking from today. And BGCFi are taking booking of SenseCap which will be delivered in the month of March. In different youtube video I have see SenseCap has better review. But yes, ClodPi is new brand and only delivering in India. SenseCAP has internal FAN to keep it cool but ClodPi dont have. Also SenseCAP has automated updation etc and can be attached with outside Anteena as I figure out from different youtube video where as ClodPi, I could not able to find much reviews. SC work on raspari and Clodpi has something else. I need to order one today before stock ll be out, if you can suggest your point of you. I am new to Helium but I trust you aloot.
@anugauravanu3 жыл бұрын
@@eigentech6567 Roy, I have finally ordered ClodPi miner under their Batch 2 bookings. Thanks for your help as always.
@StefAdr2 жыл бұрын
My stupid cotx miner has burned three cards so far... Keeps adding to the pile of wasted money...