Hi everyone! I am sharing this video by @lrn2diy for those of you who are interested in fixing the timing in your machine yourself 👉🏾kzbin.info/www/bejne/nKvLg2mGg9F8aqc The timing on my machine isn’t off, so I didn’t make this video to show how to fix it, but I don’t mind sharing resources that may help.
@geraleeparker19793 жыл бұрын
How do you replace the whole bobbin holder or is it better to buy a new machine
@sewfab78053 жыл бұрын
@@geraleeparker1979 You can get a bobbin case on sewingpartsonline.com.
@anowlin2993 Жыл бұрын
Thank you!
@lcomgarcia4 жыл бұрын
God bless you. I was this close 👌 to throwing my machine against the wall. Thank you for saving her ♥️
@the_angry_empath4 жыл бұрын
Right here with you
@brandybibian93514 жыл бұрын
Nicholas Kinsman same
@jenniferchisamore97244 жыл бұрын
i am right there with you I purchased this in March and it has already stopped threading/pulling the bobbin thread through. I am at a loss.
@sihluphekilezuze86883 жыл бұрын
Same here
@TheEstelaLimaa3 жыл бұрын
SAME!! Thank you!
@Cocoagoddess_3 жыл бұрын
spent two days trying to figure out why my top thread wouldnt catch the bottom thread and this video was the goldmine for me!!!!!! Thank you so much
@debbiejones58093 жыл бұрын
I have the same problem to so what do we do about it
@rw55532 ай бұрын
Just started using my sewing machine and immediately ran into this issue. I viewed several other videos, but this was only one that I found helped me resolve the issue. Thank you soo much.
@caseywells45912 ай бұрын
Same! This is the 4th or 5th video I watched, I was in tears. But what finally helped was when she explained about the length of the thread from the bobbin!
@KC-wg2qv3 жыл бұрын
I grew up watching my grandmother and mother sew and I literally can’t even start threading the needle on a sewing machine! Lol! But I’ve always wondered how the bottom and top thread “met” and made a stitch and no one has ever been able to explain it to make sense to me until THIS video! 40 years this has been the 8th wonder of the world to me. Lol!!! Now you have made me excited to learn to thread this antique sewing machine and learn to sew!! Thanks for sharing your knowledge - and for taking your machine apart! Lol!! You’re awesome!!
@Sewintoitlessons3 жыл бұрын
I'm glad this helped! I'm leaving this link in case you haven't seen these already. Hopefully these will give you a good start on your sewing machine. Take care! kzbin.info/aero/PLtL9D2hXyc1mPNbPn52SmPv_-SJvfo1hs
@Everyoneisanartist7762 жыл бұрын
May God bless KZbin!
@angcrivellone4 ай бұрын
Thank you SO MUCH! Like everyone else here, you have saved my brand new machine from certain DEATH! Being new to sewing has definitely been a challenge at 40 years old. I wish I would have paid more attention to my Grandma when she tried to teach me at a young age. You are a God send! This tutorial was amazing! Thank you for sharing your knowledge with those of us who obviously have alot to learn! Thank you! Thank you! Thank you! (MY LX3817 says thank you too!!!) ❤❤❤
@Sewintoitlessons4 ай бұрын
You’re welcome! I’m glad you haven’t given up on learning to sew. 😊
@kirstynpauley55353 жыл бұрын
I have been staring at my machine for an hour, in tears, on the verge of throwing it away because I was so frustrated with my bobbin thread. I went to the Brother website, I googled, I KZbind. Couldn’t fix it. Then I found you and this video and 4 minutes in, my machine is working 🙌🏼🙌🏼 THANK YOU!!
@Sewintoitlessons3 жыл бұрын
Kirstyn, here’s a big virtual hug! I’m glad this helped. Happy sewing 💜
@deborahdaye3153Ай бұрын
I was getting ready to buy a new one. I found you and I did what you said. I took the bobbin housing out, cleaned it all up and put it back and I'm back in business you a little while longer. Thank you❤❤❤
@XxMoonlitrosesxX4 жыл бұрын
Girl you just saved me so much time. I’ve been struggling with threading it and watching so many videos and after an hour, still couldn’t figure out what was going on. 5 minutes of your video and I’m good to go!
@hexlee38823 жыл бұрын
Wasn’t necessarily the same issues but watching up close precise timing was what helped me manually set it back right I had it off by one click. No one had done a close up video of the exact drop and rise. Thank you so much!!
@theshadowofgod12 жыл бұрын
You are a god send! Been trying to figure out for awhile why my mother's sewing machine wasn't catching the bobbin and you demonstrating with the wheel coming around and the hook catching the needle's thread helped more than any I've seen thus far.
@lisas291510 ай бұрын
You are a lifesaver!!!!! The thing that worked was to turn the hand wheel towards me!!!!! Thank you! I’m eternally grateful! ❤
@joannerichardson69856 ай бұрын
I swear you are my sewing guardian angel. If I'm ever having difficulty with this I watch the video and it works!❤
@Sewintoitlessons6 ай бұрын
Aww, you’re welcome! Happy sewing.
@joannalacanlale52013 ай бұрын
This was so helpful! My top thread wasn’t catching the bobbin thread and turns out I just needed to hold the top thread 🤦♀️. Thank you for the detailed troubleshooting!!
@tonyaweinberg59968 ай бұрын
Yes! I struggled for 30 mins to get this bobbin to catch. You said to turn the wheel towards me and that was ALL I needed!! Thank you!!❤
@Sewintoitlessons7 ай бұрын
Hi! I’m glad this helped.
@mwelsh644 ай бұрын
Thanks for the awesome video. I came to find out why my thread wouldn't pick up. Thanks to your link to fix the timing, I was able to fix my machine and was able to fix the split in my pants.
@Sewintoitlessons4 ай бұрын
This is awesome! I'm glad the video and the link helped. Happy sewing!
@rjuarez49134 жыл бұрын
This is the best suggestion for brother sewing machine bobbin threading. Good job. Concise and explanatory. Love it. Finally a good suggestion for this issue.
@boolean97872 жыл бұрын
this was SO helpful. i never rlly understood how the whole timing thing worked but the way u demonstrated it made it so clear to me. thank you!!
@Mission_Me3 ай бұрын
Tfs❤None of these fixed my issue but after all the stripping and cleaning. ...I realised my needle was inserted wrong🫣, that fixed the problem😂😂 sometimes checking the basics would help save heaps of time.
@4thMort4 жыл бұрын
Thank you! I have been sitting here all morning trying to get that stinking little thread to come up and you solved my problem. First time sewing, first time doing anything like this. Trying to make a mask for the first responders. So thanks for the very helpful video.
@mariadeleon41714 жыл бұрын
Thank you so much! very helpful information! I had no idea why my bobbin thread wasn't catching. I'm glad my machine isn't broken .... haha
@emilylong90962 жыл бұрын
God bless you! I had been crying for 15 minutes because I couldn't get my machine working. I'm a little rusty and was having a block. then I realized I was spinning the dial the wrong way.... 🤦🏼♀️ it's been one of those days...
@beckyborgeson53756 ай бұрын
Thank you! I was turning the knob forward, not toward me!!! I rolled it a bit toward me and it moved the bobber gadget! thank you so much!!!!!!
@thekeptcastle7 Жыл бұрын
You are a life saver! My thread was too short. Didn't use the cutter, and it worked immediately!
@ortizfam21924 жыл бұрын
Ughhh, thank youuu for this!!! I've been struggling with getting back into sewing during this quarantine. been at it for HOURS and watched this and finally got it. Thank you again!
@evjimz84603 жыл бұрын
Omgggggf I’ve Been trying To thread For 2 hours and I finally saw your video and it Worked Right away wow TYYYY FOR SHARING
@Sewintoitlessons3 жыл бұрын
😊 I’m glad this helped!
@sherylschluenz29984 жыл бұрын
THANK YOU!!!!! I have been fighting my darn machine for hours! I finally saw your video and I fixed all the issues!
@ranalakkis98204 жыл бұрын
Waw! Thank you so much. All that i was missing is the trick of holding the upper thread in order to catch the bobbin . Best video i've seen so far .
@lindag22144 жыл бұрын
OMGosh!! Thank you so much!! This drove me almost to the point of tears!! I love doing my own sewing and alterations but this had me tossing my machine and giving up!! Thanks so much for taking the time to help!!💗BLESS YOU!!
@Sewintoitlessons4 жыл бұрын
Linda G I'm glad this helped! 😊
@jamesj.austin36863 жыл бұрын
Thank you so much! I am a newbie who was having rough thoughts because my brand new machine wasn't picking up the bobbin. 😂 I made the string longer and am practicing stitches just that quick. Whew! #GODBLESS
@josiegoodridge39773 жыл бұрын
Big thank you!! I was about to take this machine back to the store. It was bought only 2 months ago. This vid saved me the stress. The thread was too short.
@TracyDunneDerrell2 жыл бұрын
Thank you! I've been having issues with the bobbin on my Singer ET-1, and I've watched several videos which all more or less suggest cleaning your machine. And I understand, but that's not my issue. Yours is the first one I've seen that addressed the possibility of a timing issue, and though I haven't been able to fix it, I'm pretty sure this is at least part of the problem. I'm very glad I found your channel.
@Sewintoitlessons2 жыл бұрын
Tracy, I'm glad this video helped you get closer to fixing the problem!
@Mimi07mystery4 жыл бұрын
Thank you so much for taking the time to make this video , it just saved me from throwing my Janome away . A little patience and knowledge got me through fixing it for the time being . God bless you .
@Sewintoitlessons4 жыл бұрын
Lolita Wonder you're welcome!
@Magesrook Жыл бұрын
Been fighting my machine for 3 days an your video did the trick. Thank you so much.
@tracymartell404010 ай бұрын
Omgggg I thought that I was going crazy. First time using my machine really no issues catching the bobbin. Ran out, refilled it and it wouldn't catch. Idk what I did the first time to get it to catch the bobbin, but this time holding onto the top thread off to the left od thr needle to keep the tension did the trick. Thank you!
@Sewintoitlessons7 ай бұрын
Hi! I’m glad this helped.
@julierauthshaw85566 ай бұрын
Laree, you have given the best explanation I have ever seen of the way the timing hook works. Unfortunately, mine needs to go into the shop. But a hearty THANK YOU!
@Sewintoitlessons6 ай бұрын
You are very welcome!
@sandrasmith55773 жыл бұрын
Thanks for all your videos! You have helped me understand so much about how the equipment works. I lost interest in sewing years ago because of tension problems. I lost my patience and the no internet to help me back then. I feel so blessed to be alive in this day and age!
@shantelmartinez594 жыл бұрын
Thank you SOOOO much for this video! I just purchased my machine 2 days ago and today during some sewing, I noticed my lower thread wasn't catching. I was so frustrated I was nearly in tears, I thought I had broken the machine. I found this video and I was able to fix the problem. Again, thank you so much, you are SO appreciated ❤
@Sewintoitlessons4 жыл бұрын
shantel martinez you are very welcome 💜
@hummingbirdlady115 жыл бұрын
First must say I very much like your videos. The camera work, narration and instructions are excellent. Hoping you make many more of your wonderful videos for us so we can be happy with our sewing machines of any brand. A feature I especially like about brother sewing machines is the "quick set bobbin" which allows to begin sewing without drawing up the bobbin thread when the thread is passed through the quick set groove and cut at the end. Page 21 of the manual explains about using the quick set bobbin feature and also about not using the quick set feature to draw up the bobbin thread as you explained as well for times when a long bobbin tail (with a long upper thread tail) is needed for sewing darts or making gathers.
@Sewintoitlessons5 жыл бұрын
Myra Thomas, thanks for bringing up the quick-set feature. I’ve used Brother machines with the quick-set feature and its pretty cool.
@hummingbirdlady115 жыл бұрын
@@Sewintoitlessons Very cool and I love that feature on my own LX3817
@Sewintoitlessons5 жыл бұрын
Myra, you’re right 🙈. My machine, like yours, does have the quick-set bobbin feature. Thanks again for pointing that out! 😊
@Philly_Driver3 жыл бұрын
after 2 years, this video is still helping people! thank you so much for making this video!!
@Sewintoitlessons3 жыл бұрын
Philly Driver, thanks for sharing. This made my day! I'm glad it has been a help.
@KutWrite2 жыл бұрын
What you explained helped me and I don't even have a Brother. I have a Simplicity with a vertical, cased bobbin.
@SexyPapasmurf4 жыл бұрын
You stripped the machine down and put it back together.....at home.....alone? You're a genius. I couldn't do that. Thank you
@TheJudeJane4 жыл бұрын
SexyPapasmurf She didn't "strip it down" - that's just the shuttle race area where the bobbin case is. Get yourself a manual by Googling the brand of your machine and the model number. Most manuals are in pdf format and absolutely FREE to download. Print out and keep in a 3-ring notebook, and put it near your sewing machine for solving problems. It is a Bible for your sewing machine - a MUST!! 😊 Happy learning, Happy Sewing!! 👍🏽👍🏿👍🏾🍀
@Sewintoitlessons3 жыл бұрын
@@TheJudeJane hi! Actually, I did mention--quickly-- that I ”pretty much” stripped my Janome sewing machine. I talk about it more in a previous video. 😊
@dianehanson26782 жыл бұрын
You helped me fix my Brother sewing machine! THANK YOU THANK YOU THANK YOU!!! God Bless you sweet lady!!!
@semco720572 жыл бұрын
I am having that problem on a new Singer model 2277 machine with the side loading bobbin and when I have time I will check the bobbin setup once more to see what I did wrong. Thanks for sharing this information with me and I appreciate the information you gave us.
@Sewintoitlessons2 жыл бұрын
Sidney, you're welcome!
@tonyatolleson940311 ай бұрын
We watched so many videos & you by far explained it better & was abke to fux my bobbin problem. Thank you soooo much
@Sewintoitlessons7 ай бұрын
I'm so glad this helped!
@SnowyTequila3 жыл бұрын
BLESS YOU! My thread ran out and the bobbin thread as well and I was losing my little mind over trying to figure out how to get the new thread to catch! Thank you !
@Sewintoitlessons3 жыл бұрын
You're welcome!
@joanmoore23882 жыл бұрын
Your videos are the best filmed and content is succinct!! I call myself the "CursingCrafter" because every time I want to sew something... the machine has other ideas!! Thank you!!
@Sewintoitlessons2 жыл бұрын
😂 I'm glad these videos help!
@joross9455 ай бұрын
I just found your video it helped me a lot was about to kick this machine out but you help me fix my problem thank you so much
@dawndorminy45934 жыл бұрын
THANK YOU SO MUCH!!! Im a beginner sewer and I've been "fighting" with the bobbin thread!!! Whew...
@meetmewithin Жыл бұрын
Omg. Thank you. I was so lost, it turns out that I was turning the wheel AWAY from me and not TOWARDS me. 😅 Thank you so much
@ocean101bob44 жыл бұрын
Thanks for the excellent video. Being a 10 year parachute rigger my sewing is more related to heavy sewing but it's nice to know how to keep up with the newer machines. Keep up on these very educational videos
@Sewintoitlessons4 жыл бұрын
Oh wow! I was not aware of parachute riggers before now. Thanks for sharing.
@keni9375 ай бұрын
PHEW! THANK YOU SO MUCH. You just showed me a new way to resolve the problem of my machine needle nit picking the thread.
@realchristianmusicchannele95323 жыл бұрын
Thank you so much. I have an older model I'm using at work and after an hour of trying, your video helped me get it to work. God bless.
@Sewintoitlessons3 жыл бұрын
God bless! You're welcome! You sew for work? That's awesome!
@realchristianmusicchannele95323 жыл бұрын
@@Sewintoitlessons not all the time but today I am. I'm an insulator and so sometimes we cover our insulation with heat resistant fabric to create pads to wrap around hot pipes.
@Sewintoitlessons3 жыл бұрын
Wow, it's amazing how sewing shows up in so many areas of life. I can see, though, how the sewing might throw off your workflow. I'm glad these videos are helping.
@francescohen86663 жыл бұрын
Omg you are amazing! Thank you so much for posting this for all of us very incredibly frustrated brother Bob and users! Thank you thank you thank you!
@runescapewarrior66 Жыл бұрын
I don't normally comment on videos, but they length the machine has you cut it to was killing me, thank you so much for showing this and keeping me from pulling my hair out more!
@Sewintoitlessons Жыл бұрын
Hi! Thanks for the comment 😊. I’m glad this helped!
@ApplePi3.14153 жыл бұрын
Im still having trouble. Idk what I’m doing wrong :(
@sunshinevibz52553 жыл бұрын
Same 😕
@WiLDBANCHiE05133 жыл бұрын
Same
@donnabailey86533 жыл бұрын
Thank You will check this out. My top thread keeps coming out of the needle immediately when I try to see.🙁. This is first time using. So frustrated.🙄 Will tune in again.🤗
@debbiejones58093 жыл бұрын
Me to I'm still having the same problem with the thread and bobbin and then I took it a part and find no bobbin catcher on it so what do I do now
@zambiarecreationsbykamosse31723 жыл бұрын
Thank you so much Laree! 20 videos later and I found you and you explained much better!
@Sewintoitlessons3 жыл бұрын
You’re welcome!
@nadinedellabitta57224 жыл бұрын
You are a incredible instructor. Fixed a problem that has been going on for weeks and I was about ready to give up on sewing. Thank you a bunch!!
@Sewintoitlessons5 жыл бұрын
Hi everyone! My latest video was meant to be uploaded on the first Saturday of this month; however, I became sick last week and lost my voice for a few days. I am really sorry about the late upload. I am currently editing and I hope to have this video up this week. Thanks, guys, for tuning in to see my videos! I appreciate you. Hope to sew with you soon!
@catzsmartzcutie95 жыл бұрын
Laree Washington Hi could you possibly explain why the timing won’t move at all???
@averyketterer53942 жыл бұрын
So i’m having a timing issue and i took mine apart and the needle and the hook aren’t meeting at the same time. how do i fix that so they’re synchronized?
@Sewintoitlessons2 жыл бұрын
Avery, please check the description box to for a video that demos the repair. Take care!
@liftingandstitching Жыл бұрын
Laree, I came across your video because I had this exact issue with my Brother sewing machine of the thread not catching. Thank you so much for sharing this guidance with both possible issues; turns out, it was the first issue! Threading was short. Thank you so much!
@Sewintoitlessons Жыл бұрын
Jw.fm hi! I'm so glad you were able to get your machine working. Happy sewing!
@Melissa07744 жыл бұрын
I have a Brother LX3817 and I have a problem with it that I can't find anyone else talking about anywhere online, KZbin, or anywhere else. I figured out that it's hard to catch the bobbin if you cut it to short with the cutter. So that's not my issue. My problem is that the bobbin thread doesn't seem to settle into the right position, once it does get caught by the needle. The needle catches the bobbin thread fine, but when I start to sew, the bobbin jams. I put it in, facing the right way. The thing is, I don't know anything about sewing machines because this is the first one I ever used since middle school. I see in this video, that when you caught the lower thread, it settled across the top left side of the bobbin, just like it does in my machine. And I see that it appears to be in that position in other brands of machines, as well in other people's videos when they're ready to sew. I wasn't sure if the bobbin thread was supposed to settle into that position until I saw in this video that it is. But on my machine, I've been having to use a dental pick and a pair of pliers to move the lower thread from the top of the bobbin, down to onto the right side of it. (I could probably use tweezers, but I don't have any.) If I don't do it, the machine jams. It's very difficult and annoying and I dread having to change thread colors because it takes forever and if I don't do it just right, then the lower tension is to loose. But if I do it right, the machine works fine. Does anyone else have this problem? Do you understand what I'm talking about? I hope my explanation isn't to confusing.
@Sewintoitlessons4 жыл бұрын
Hi! What’s happening with your bobbin is defiantly interesting. I actually just recorded a Q&A session with a certified sewing technician and we talked about issues with the bobbin and bobbin thread. We used my Brother LX3817 as an example. I hope the information there will be helpful to you. Be on the look out for that upload. Of course, there are situations that a professional may need to take a look at the machine. I would love for you to keep me updated about this issue, and I will definitely share any info I receive.
@Melissa07744 жыл бұрын
@@Sewintoitlessons Thanks for responding. What would really help me is if you would make a video where you show what the bobbin does after you load it and begin to sew. I want to see where the bobbin thread is supposed to go, once you've picked it up with the needle and are ready to sew, and then as you start to sew. I'm still not sure if the thread is supposed to sit on top of the bobbin, or wind itself around it. I know that as you're sewing, the thread goes up over the top of the bobbin and winds down around it. I'm just not sure what position it's supposed to start in. I'd like to see a video where you leave the cover off as you pick up the lower thread and begin to sew a few stitches. Point out where the bottom thread is before you start sewing and how it moves as you go along. You'd probably have to use a small piece of fabric that won't cover up the bobbin area, so it might be difficult to do. I'd really appreciate this because no one else has ever done it. I'm sure that whatever the issue is with my machine, it's probably something very simple that someone who knows what they're doing could fix in five minutes with a screw driver. But I don't trust the local sewing and vacuum guy in my area because I thought he was kind of rude when I had taken a vacuum to him and would probably charge me to much money.
@LeslieDennyFitness Жыл бұрын
You are an angel. I just caught this video and you saved me and my project. Thank you so much!
@WhippetOut4 жыл бұрын
Very clearly explained and it really helped me as I was having the ‘cutting too short’ issue with my Brother machine. Thanks very much!
@user-vl9eu1tz1x Жыл бұрын
GURL! Thank you sis! I was so pissed off at my machine I was so worried it broke since I hadn't had this issue until now
@CATBEST20113 жыл бұрын
Thank you, thank you, thank you!! I just spent an hour trying to figure out what was wrong!!! I should have come to you first. 🙌🙌
@StitchingUpChaos Жыл бұрын
You're an absolute lifesaver! Secondhand embroidery machine was driving me nuts!!! And now I don't feel like a complete idiot for buying such an expensive thing secondhand :D :D :D \o/ Woo!
@ifancydolls62823 жыл бұрын
Omg! I just used my very first sewing machine last night and the bobbin thread too short was my problem...thank you for this video
@paddedshell3 жыл бұрын
I've been asking other U2bers if the bobbin, when coming over the top, should be to the right or the left, and getting no answers. Derp, counter/clockwise! Thank you for defining the obvious. I just couldn't find the right words. LOL
@xolissyox16243 жыл бұрын
Ty so much I was getting so frustrated your video saved me from a meltdown
@Sewintoitlessons3 жыл бұрын
Oh no! I'm glad this helped. Take care 😊
@elmer.joannreifel7338 Жыл бұрын
Thank you foe the explanation about timing as I hadnt understood exactly what that meant. I bought the Brother LS14 from a friend when she moved but I dont have a manual so I am still figuring it out.
@williammroczkowski37323 жыл бұрын
I had the same problem with my Brother PE770, I did all these tweaks which are very well explained. My problem was an ever so slightly bent needle, carefully bent it straight and it grabbed the first time and im back in business.
@Sewintoitlessons3 жыл бұрын
William Mroczkowski, yes, a bent needle will cause problems. It's great that you were able to catch the issue!
@karendevaney9329 Жыл бұрын
Thank you so much - I was ready to throw my machine out the window in frustration! The long thread method worked for me.
@Sewintoitlessons Жыл бұрын
I’m glad this helped!
@rubymeister47432 жыл бұрын
Thank you ! I fought this machine for an hour!
@vbautista36284 жыл бұрын
Thanks for the video you were the first one to say that we needed to spin it towards us, issue fixed 🙂
@juliehuntley426311 ай бұрын
Thank you, thank you, thank you! My bobbin thread was too short! I have messed with this for 2 days! This was on my Brother XM 2701.
@juliehuntley426311 ай бұрын
Nope. It helped but my thread is getting stuck in the bobbin case! So when I’m done sewing I can’t pull the material out from under the needle foot. I open my bobbin case and the needle thread is all caught up in there. There is a piece of loose thread too!
@cassidyferrari72792 жыл бұрын
Thank you!!! I couldn't find instructions that actually explained what was happening during the 'needle picking up' bit, this helped massively - I was just pulling the thread at the wrong time :)
@Sewintoitlessons2 жыл бұрын
Cassidy, I’m glad this helped!
@kpwxx Жыл бұрын
I was doing the same I think! Pulling it when it had scooped up the bobbin thread but before it had slipped off the hook. Seeing what is going on inside is so so helpful! (It honestly seemed like magic before lol)
@ebunishola71467 ай бұрын
My goodness, thank you so much! I was struggling with this bobbin and on my last leg until I came across your video. All I had to do was to turn the wheel towards me 😭😭😭
@Sewintoitlessons7 ай бұрын
Whew! 😅I’m glad it helped!
@donnasutera83154 жыл бұрын
I have been trying so hard to figure out how to fix my bobbin issues,,, and it worked,,, your video was so helpful,,, Thank you , Thank you,,
@Sewintoitlessons4 жыл бұрын
Xbox Player 11 DTkid you're welcome! I'm glad it helped.
@ninamolina4584 Жыл бұрын
You are wonderful💕💕💕. I was so flustered and I was about to give up, but thank you so much, cause you saved the day.
@Sewintoitlessons7 ай бұрын
You're welcome! I'm glad this helped.
@hascallwaithe10184 жыл бұрын
my mom always told me two heads are better than one thank you so much for this video god bless you and your famil and please stay safe once again thanks very much
@Sewintoitlessons4 жыл бұрын
Thank you! God bless.
@kirarankin42304 жыл бұрын
Thank you SO much. After I took apart my machine I was able to see the bobbin case popped undone. Thank you!!!
@rosetodaro76923 жыл бұрын
This was so helpful! Thank you so much. I couldn't have fixed my sewing machine without you.
@Sewintoitlessons3 жыл бұрын
You're welcome!
@Mayan09083 жыл бұрын
Thank you so much!!! I am dealing with this problem for a couple of days and you solved it!!! God bless you.
@Diamond0074 жыл бұрын
Life saver. Thank you for taking the time to do this in detail. Very helpful. I am new to sewing and this was the key!!!
@Sewintoitlessons4 жыл бұрын
Lynn M you’re welcome! You may find this helpful...I am uploading a beginner sewing series 😊. Here is the intro video kzbin.info/www/bejne/qqqzqIR9fNdrhKc
@sereo5174 жыл бұрын
Life saver 🙏🏾 I thought I had to get a new machine
@nataliekittylane49103 жыл бұрын
Thank you so much for this step by step and beautifully narrated clip xx
@yowgyrl5 жыл бұрын
I didn't think that I would be so captivated on how the threading work. :)
@kathleenherb5426 Жыл бұрын
thank you I finally got my bobbin and my top thread to work together
@Forevermoretraining3 жыл бұрын
The bobbin is such a mystery - you helped clarify some of that mystery.
@lisavictorcruz31723 жыл бұрын
Thank you, I have been fighting to catch my boppin and I got it first try after watching you!!!
@Sewintoitlessons3 жыл бұрын
Lisa, I’m so glad! You’re welcome!
@maggiedyals14694 жыл бұрын
You are my hero! Threading it through that side groove and cutting it did the trick. I am so brand new to sewing I would never have figured that out LOL Thank you thank you thank you
@anonnnnnsh5 жыл бұрын
Thank you, very clear teaching, very helpful to see how the timing works.
@rluebbers42584 жыл бұрын
Awesome explanation. Now I know what to look for to get the machine to pick up the thread. Thank you!
@kellygarner76792 жыл бұрын
Oh Thank you so much for helping me fix my problem!! Your awesome!!
@merlinfalcon85184 жыл бұрын
Such a beautiful and competent woman. You just saved my life kid.
@Sewintoitlessons4 жыл бұрын
Merlin Falcon thank you! I’m glad I was able to help.
@greanfinisher40143 жыл бұрын
Great video! Now I'll have to try to figure out why my 1924 Singer electric sewing machine isn't pulling up the thread.
@bruv21853 жыл бұрын
HI! another problem you could be having (if your sewing has jammed before and you just cut the thread from the bobbin then and there without foreseeing that could be potentially an issue bc u were a beginner like me) take tweezers and pull out any small pieces of thread that may be blocking the thread from coming up. You ofc could take apart your machine and pull it out much easier but if you’re anything like me and know you aren’t very good at putting things back together then tweezers are the way to go!
@cashionsikes93203 жыл бұрын
Girlll you are the bomb! Thank you, thank you, thank you! No question left unanswered! Well done!
@Sewintoitlessons3 жыл бұрын
Cashion Sikes, 😂 you're welcome! All the best to you on your sewing journey.
@secretattractionna4 жыл бұрын
Thank you for this video. I am a beginner with this machine style and don’t have the users manual. Your video helped me troubleshoot and get my bobbin thread up. (I didn’t know to turn the knob towards me to get the thread to catch)
@TheJudeJane4 жыл бұрын
Joanna Santucci Google brand name of your machine and model # and get yourself a manual. Your manual will answer a ton of questions; it is a Bible for your sewing machine!!😊❤️(Many manuals are in PDF form and FREE!!!).
@nicolerakes5462 Жыл бұрын
Thank you. I was needing this help. Angel for the beginners like me