TV Studio in a Flight Case - 2018 Edition // Show and Tell Ep.50

[@GaryCruz]

Congrats on the new setup! It’s cleans and I’m digging the size! Have a look at the led strips I put on mine, you can cut them to size and they can plug into that USB power strip. Take care!

[@heretorecord]

Thanks, Gary! Loved your video on this topic and we’ve since added a simple light in there that works perfectly!

[@HansDeuze]

I like your new setup, looks a lot cleaner then your previous setup.

[@JoPhiGURU]

Best advice of this video was: Don't buy what you think that you need!! :D ... This soft rack-case is cool!! Thx for that idea!

[@heretorecord]

Really appreciate that. I think that is a huge part of investing and creating something like this!

[@martinchambers6930]

Nice set up. Any idea of a power distribution board exactly same as the the t.racks Power 8 S USB but with 240v Australian plugs? I cant find a thing!

[@TheTEENSTREAM]

I love your kit and am building one but I have a challenge with power supply, I would like to build a case that can be used in places as remote and off the power grid. would you consider advising us on a rechargeable battery or a portable power generator that can be used in the kit to provide power .

[@QuicksilverSG]

When plugging into a venue's network, how do you resolve the fixed IP assigned to the ATEM TV Studio HD with the DHCP addresses automatically assigned by the venue's router?

[@heretorecord]

I have my own router built into the system - that way I have full control over my internal IP address and can still connect to the wider internet also

[@leelannom1030]

Nice kit. Thanks for sharing. Do you know of any iOS apps that connect to the ATEM TV Studio HD that can be used for tally lights at camera? Thanks.

[@RodrigoSilvaFilms]

do you recommend put the xlr audio cables at atem? Is it possible to sync audio this way?

[@heretorecord]

I recommend plugging into the camera where possible. The audio coming into your ATEM via XLR will most likely arrive before the video (perhaps only by a small amount but maybe even a lot). If you have an audio delay function on your outputting audio device then you may want to use that.

[@RodrigoSilvaFilms]

@@heretorecord Thank you!!

[@markwilson8118]

What would you charge to build a setup in a hardcase ?? Something so easy to set up multiple cameras and mics for recording and live streams

[@fouzhomer2993]

Hi John, how would you hookup the Atem hd, Web Presenter and the HyperDeck. A diagram would be nice. Thanks

[@PadBoll]

What is the batterie life when recording video, does it last a FULL day (12H) ?

[@studiodaz]

You said you just plug the audio into the camera. Are you plugging in line input stereo Left right from a mixer or microphone. If microphones how do you get the audio panned center and not hard left and hard right on each mic?

[@heretorecord]

This camera in particular has a setting to change the audio from stereo to mono which is really nice. You could likely use a two XLR setup through instead which I use on another camera. Just keep the audio level the same for both inputs

[@aubisoka]

i love your videos! thx!!!

[@heretorecord]

Thanks!

[@rustmonster]

When you get around to adding it, what hardware box are you thinking would work best for keeping the live streaming built in?

[@heretorecord]

If I can test out a vidiu before buying one then I’ll likely go for that. I liked the web caster a lot but I need to have a keyboard and mouse with it (and I already have one for the mini pc)

[@marty2x1]

Here to Record Have you tried the BM Web Presenter? What do you think of it?

[@heretorecord]

I have not tried it yet. My main concern is that I’m still tied to a computer for streaming. I’ll also be interested to see if they bring out an updated one this year!

[@marty2x1]

Here to Record If they bring a new one out tomorrow it will take at least 6 months to a year to iron out all the bugs! I’d read that the Web Presenter had a few problems when it first came out but most had been sorted now. It would be nice to watch a decent review..hint hint!

[@evy.agency4720]

We use one - in fairness we were late to the party and installed latest firmware the day we bought it (maybe September/August last year) and it's been absolutely faultless. It's a shame you're limited to 720p out. Appreciate the reasons behind it but it's the only thing I can think that's problematic. The form factor is great for rack mounting. The menu is intuitive and detailed. Build quality is good. It gets a little warm but nothing to worry about. But yes, if they brought a new one out this year with a few improvements I'd jump on it, bugs and all.

[@Wysiwyg101]

I was wondering if you routed your video signal Cam In to Switch, Switch Program to Monitor, Monitor to Hyperdeck? I mean, what is that Right side monitor outputting a signal to except to the Hyperdeck? Very nice little compact setup by the way. I really like it. Great video as well.

[@heretorecord]

Thanks for the kind words! I would personally go Switcher>HyperDeck>Monitor - that way you can be sure that the monitor is showing exactly what being recorded. That way if there are any weird issues that pop up, I can spot them right away. If the HyperDeck shuts down for some reason I’ll be able to spot it a lot faster if the right monitor goes black all of a sudden.

[@Wysiwyg101]

Well, that's how I would do it too. However, I'm just curious as to what you have coming out of the output of Monitor 2 and where that signal is being routed to.

[@JTR...]

Hello! How you sorted your router settings for ATEM. When I plug internet cable to pc then wifi not working. Can you help with video. Thx

[@32production22]

Hi, how did you mix atem "television studio hd" with "HyperDeck"? Via Wireless Wi-Fi Router? sorry for my bad english

[@mayomode]

Hi, why not the 3U 19 inch?

[@heretorecord]

The 3U would work just fine. I just preferred this way! I’ve since used a 4U then back to the 2U so everything changes constantly!

[@reissrobinson]

Sick! Nice setup. Very clean.

[@michklusala9066]

HI sir i would like to know how much it cost to delivery it to kinshasa drc country in Africa

[@r2channel601]

Can we buy your video mixer assembly or we made it as you have

[@r2channel601]

scale by estimating the cost

[@heretorecord]

You should go ahead and buy the items yourself :)

[@isidoromaich7226]

I like the new setup, well done.

[@FilmPhotographyClub]

Hey there! Thanks a lot for making this video as well as all the others on your channel. They have been incredibly helpful! I’ll be sure to use your Amazon links when I figure out what exactly I need to purchase. I have an off topic question: What are your thoughts on using your current streaming kit versus something like the Sling Studio? If you were starting from scratch, would you consider something like the Sling Studio or would you still go the more traditional route, i.e. your Blackmagic setup? Any thoughts you have would be greatly appreciated. Thanks!

[@heretorecord]

Glad your finding the videos useful! Personally I’d avoid the sling studio as I much prefer everything to be connected via cables. If I started over again I would still go for Blackmagic gear as it really fits my needs!

[@mdissakhanrashed5382]

Hi, If I want to use BT hub instead of TP link router! Is that Okay? Thanks in advance.

[@heretorecord]

That should be fine - so long as you can log into the router and change some settings then I believe any one will work

[@mdissakhanrashed5382]

Great! Thanks .....

[@penguintelevision]

What cameras are you using?

[@heretorecord]

The Canon XA11, XA10 and HFG25!

[@PaulGalea-zz1my]

Check the X4- Streamstar as well !

[@fouzhomer2993]

Terrane Mini. WebPresenter and a Atem Hd.

[@sjcinematic5104]

I like your new setup, looks

[@KehOlaleye]

Are you based in uk

[@heretorecord]

Nope - in Sweden!

[@KehOlaleye]

@@heretorecord can you do a video on how to connect all equipment together including to the router

[@arjenvalk876]

you talk to many just show it

[@senever1]

I like to setup 3 cam studio in for you tube and web streaming please send me your support

[@PawFromTheBroons]

Aside from the colours of the cables, Pro was less zip ties... 😃

[@heretorecord]

Zip-ties free build was my real goal 😅

[@randomgeocacher]

Looks sweet, but 2U seems very small, 3U or bigger needed for my clumsy hands ^_^

[@heretorecord]

I spent way too long deciding between the two options. So don’t make me doubt my decision 😉

[@randomgeocacher]

Here to Record I’m an elephant and need big room for my mess :) I’m sure you are more handy :)

[@mayomode]

@@randomgeocacher I own the 2u bag but i thing is too small for my mess hehehe plus the iec's don't fit properlly if they are right angled so ill try with a 3units bag.

[@Capturing-Memories]

Hinges are too big and ugly, you could have used slimmer hinges for metal, those kind of are for wood panels.

[@heretorecord]

The tricky thing is though that when you put it in a case and bring it around the country/continent it ends up taking a beating along the way. Better to opt for bigger hinges that will last.

[@Capturing-Memories]

@@heretorecord It doesn't take more beating than the luggage hinges which are way smaller than what you have, Just make sure you glue in rubber pad on the top corners of the monitor to protect it from shock when it's fully closed.