Hidden Magnet Bottle Opener (Dremel Project)

Hi all, here's a simple epoxy and wood carving project for those of you with a rotary tool. Thanks everyone for being here - hope you enjoy this video of me making a magnetic bottle opener, and have a good weekend. Links for the products I used below.
You don't need to invest in a lot of expensive tools for a fun woodworking project! In this video I carved with nothing but a Dremel 4300 rotary tool and the router/flex shaft attachment and I sanded with an orbital sander (which you really don't need).
Most Dremel carving projects are very budget friendly past the initial cost of the Dremel, so having one is a great resource to make some meaningful gifts for others (as long as you have the patience). Check out the rest of the channel for more Dremel projects!
Like what I share and want to support the channel? Buy me a coffee at the link below:
ko-fi.com/logs...
Thank you for watching!
Amazon affiliate links for the tools and accessories I use below:
Amazon Prime 30-Day Free Trial:
amzn.to/3MyKYPe
My Tools:
My DeWalt Orbital Sander: amzn.to/3PJHN7A
My Dremel Flex Shaft: amzn.to/3ehsAJG
My Dremel 4300: amzn.to/3DOBhFJ
My Dremel Lite: amzn.to/3J4b61P
My Dremel 8220: amzn.to/3pj32Ch
Oils/Finishes I use:
Watco Teak Oil amzn.to/3MsBxAw
Gallon mineral oil amzn.to/3l1zqtO
12oz mineral oil amzn.to/3YAfAnp
Beeswax and mineral oil amzn.to/3sBv2Dv
My most used bits and burrs:
SHAPING:
Dremel 561 amzn.to/3dOQpIw
Dremel 562 amzn.to/3rVsSy9
Dremel 801 Shaping Wheel amzn.to/3mBGSwf
CARVING:
Kutzall Xtreme Flame Burr amzn.to/3yl8veT
Kutzall Original Taper Burr amzn.to/3m0TVnN
Tungsten Carbide Burrs amzn.to/3s4S4Ct
ENGRAVING:
Dremel 191 amzn.to/3DScmkG
Dremel 106 amzn.to/3F46sP3
Dremel 111 amzn.to/3m0zA1Q
SANDING:
Dremel 84922 amzn.to/3GFMvhw
Dremel 407 amzn.to/3pPbp7V
Dremel EZ402 amzn.to/3yhJote
Polishing Wheels amzn.to/3oNDxsP
Dremel Sanding Disks amzn.to/31UsoNR
“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites at no extra cost to you.” "As an Amazon Associate I earn from qualifying purchases."
Kutzall Affiliate Link:
5% off Kutzall products with promo code: DREMELTIME (in uppercase) kutzall.com/co...
Wear a mask, eye protection, and hearing protection, and consult your tools' manuals prior to using them to ensure safety. This video is for my insta @logscarvingclub.
If you're looking for more wood carving designs and videos, I recommend watching the video where I carve a greek paddle with a Dremel 4300. I use Walnut, Poplar, and Epoxy! The epoxy was a hassle but came out really cool.

[@iamyou3080]

I just found your channel and am obsessed. Waiting for my dremel in the mail and your videos are informative and entertaining. I hope you make more vids soon!!

[@LogsCarvingClub]

Thank you so much! I plan to soon!

[@AlexanderCamacho-d2n]

This may be a little late but you’re the goat log I hope that school is working out for you and yup thanks

[@LogsCarvingClub]

Thank you so much! It’s been great just busy. Hoping to get out some more videos soon. Also hope you’re doing well

[@tracybowling1156]

Another excellent idea. I'm sure it was a big hit at home. I love how you showed how you fixed some things that didn't originally work. Use these processes at school when you run into a difficult class or assignment. You are so talented! You're only going to get better! 😊

[@LogsCarvingClub]

Thank you Tracy! It was a fun project working around the little mistakes and learning as I went. Looking forward to more projects soon!

[@salliehines8838]

This is awesome!!

[@ETA555]

It looks nice

[@LogsCarvingClub]

Thank you! I like how this one turned out.

[@salliehines8838]

I have these tools, but have been a little scared to use. I have very little experience. But this has given me some courage! Thank you!

[@patriciawaterman9764]

Great job! Thanks for sharing 😎

[@LogsCarvingClub]

Thank you Patricia! Thanks for commenting

[@natm7856]

So creative to have a magnet on the inside to catch the bottle caps! I also really like the felt, makes it look classy 😎

[@LogsCarvingClub]

Thank you Natalie! I like the felt too, hides all the fuss at the back

[@chaz4471]

Beautiful work!!!!!

[@LogsCarvingClub]

Thank you! I really enjoyed this project.

[@Dave_N8CR]

This is awesome! Enjoy that you’re just using a Dremel for all your work. Sanding is extremely boring, but using an orbital sander is fine. Looking forward to your next project.

[@LogsCarvingClub]

Thank you Dave! It presents a good challenge, and keeps the budget and space needed pretty low. Thanks for being here!

[@gemaqueartes...1639]

Muito bom! 👏👏👏👏👏

[@LogsCarvingClub]

Obrigado!

[@bensonbird9929]

I love the writing "Here is a clip of it to increase my audience retention"

[@LogsCarvingClub]

Hope it works!

[@tregaricus00]

subscribed ❤

[@LogsCarvingClub]

Thank you so much!

[@AG8000]

Nice 👍

[@tjblancato]

Biggest Log fanboy✋

[@LogsCarvingClub]

Let’s go!!!

[@kylerudman3266]

Jokes were landing this episode!

[@LogsCarvingClub]

Thank you Mr. Rudman, I try my best

[@Wayneawebb]

I'd use the bottle caps in an epoxy serving tray.

[@LogsCarvingClub]

That's a great idea! I think I have a couple hundred so I can probably do multiple projects

[@nephiilim]

Great videos man. Do you by any chance have any suggestions about doing dremel stuff in an apartment? I've come across a few things but it'd be cool to see what you think. That's saw dust gets on everything pretty fast.

[@LogsCarvingClub]

Unfortunately when I’m in apartments I only use mine for very small projects like engravings because it’s so loud I don’t want to bother roommates or neighbors and it’s so messy I have to keep it outside since I would otherwise need a dust collection system

[@MakersWorld20]

You could make another bottle opener, instead of wood you could use a mix of your bottle caps and epoxy and create a block/ base from that?

[@LogsCarvingClub]

That would be super cool! I could probably do that.

[@shadi3993]

yet another great execution i ordered a mini drill ( chinese dremel from a company called hilda) because i didnt want to invest huge amount and i will hopefully get it tommorow and to say i am excited is an understatmet thanks for giving me the push to purchase it , i have a request if if you think you can help me with i would love to make a comb or a brush as it would make a great gift for someone like my grandma can you post a video on it ?

[@LogsCarvingClub]

That’s great to hear - I hope you enjoy it! I actually have made a comb before on my instagram, I may make a video on one if I can find the time. Too many projects on my list to cover them all

[@Agent.313]

Mainly got dremel cuz of you bro, i need help on how to cut. I have a question: If you could please answer. The dremel spin clockwise, so when I cut from left to right in the direction of the wheel cutting spin, my dremel jumps forward. I was wondering if you could tell me what I am doing wrong and how to avoid making dremel jumping forward away while cutting with a cutting disc. When i cut from right to left direction, the opposite direction of the disc spin, it doesn't jump.

[@dilavardanish6282]

Which Dremel do you think best for carving wood like you do for long periods of time? I’ve pretty much bought all the bits in your bio plus a Kutzall for a MakerX rotary tool. After using it for a bit I realized it wasn’t doing good. I recently realized I have an outlet in my new back yard so decided to look into some good corded rotary tools.

[@lingcod91]

Old hard drives contain Neo___ magnets. They are attached to a hunk of metal with mounting holes. These are scary strong and difficult to remove them from flat surfaces. DON'T TRY to LIFT . . . rather SLIDE them off. DANGEROUS if CARELESSLY HANDLED. Neos are less affected by shock or heat, like regular magnets are.

[@danielsolheim3296]

Do you feel any power difference between the Dremel 4000 and 4300?

[@LogsCarvingClub]

I haven't done a direct side-by-side, and I don't have a 4000 anymore, but I didn't feel much difference at all. I try not to stress the tools regardless though to make them last

[@pxel1876]

Where is my man😭

[@LogsCarvingClub]

Whatcha mean?

[@pxel1876]

@@LogsCarvingClub you haven't posted a vid in like 5 months

[@LogsCarvingClub]

@@pxel1876 Tell me about it, I’ve just been too busy/lazy with stuff but I’m hoping to pump some out late Decemberish

[@malk1275]

@@LogsCarvingClub I hope you do , then you get a new sub