High Rail Truck Derails!

[@djsofer4034]

I think your filming made him nervous, lol

[@billmerrell8900]

At some crossings on the CSX a track inspector can punch a 4 digit code on the radio and trip the crossing gates. Could be what happened here. When setting a high rail vehicle on, we set the rear wheels and then the front. You gotta make certain you are not up on the flanges and the gear is all the way down. You have to get down and look close. Which he really did not do either time. Sometimes I have to make adjustments 3 or 4 times to get it lined up correctly. Other times I get it the first time.

[@JawTooth]

Awesome! Thanks for your comment!

[@derekwall200]

so if this were to happen to you, how would you fix this problem?

[@MyrtleBeach123]

I think Jaw Tooth made him slightly nervous. Perhaps he is camera shy?

[@czam0584]

​@@JawToothAfter seeing a High rail when could you expect a freight train?

[@AR-jx6wr]

Over 30 years ago I used to refurbish hydraulic cylinders used on rail trucks and it wasn’t that unusual for them to have to try two or three times to line up on the tracks however, the majority of their trucks were 5 ton and over.

[@SMartinTX]

If this guy is experienced getting a high railer truck on the tracks, how often does it take for a rookie to get a truck on the tracks correctly?

[@Sammydx1]

Took me about 2 months.

[@kdmq]

He is so good at his job, his performance is off the rails!

[@rockislandmodeler6802]

When he first got out to put down his wheels he didn't have his hard hat on. Safety violation.

[@Supgangy]

Do you put your hard hat on when you are starting your engine? 😂

[@EntertainmentWorldz]

Fantastic video dear Friend love it. God bless you. Happy Day

[@AllanLoveJr]

CSXT. HOW NOT TO KEEP YOUR EQUIPMENT ON THE RAILS AND NOT DROPPING IT ON THE GROUND.

[@mikel5295]

He is not used to people filming him do that , he will be scarred for life . Lol

[@Trains21]

Interesting that the gates were down BEFORE he got onto the rails and then went up WHEN he got on the rails.

[@JawTooth]

Yeah, that is kind of funny. I hadn't noticed that. I wish that one car hadn't got in my video. Its the one car rule!

[@Trains21]

@@JawTooth That's right!!

[@rickszabo4312]

Most Hi Rail trucks have insulated wheels and tested at servicing to be insulated from each other so they don't drop the blocks.

[@harryroland5044]

i truly recommend derickwalker454.on I.G...he help me to get back my dad stolen truck back. .

[@brianrichards517]

My dad worked on the railroad for 45 years when he started he walked a certain amount of track before getting a motor car then he finally got a hi rail truck but he never had a push button for lowering wheels he had a big bar it wasnt till about a year before he retired that he got air conditioning I watched him put his truck on the rail without even being around a crossing

[@Bowdy_Up]

Maybe on old 100lb rail, but you ain’t getting a ten thousand pound truck on 132 or larger rail without some sort of crossing

[@rickszabo4312]

About half the pickups use a manual bar to put on track, depends on the load, hauling fuel ect we will put hydraulic gear on the pickups all way around or just on the rears.

[@googoo-gjoob]

@@Bowdy_Up , im thinking his memory crossed wires. i wonder if he meant got *OFF* the rails without a crossing? ive done that a dozen times.

[@neil442]

That guy just died with embarrassment-rush something or be reckless and theres the results ! Tell me Brian were you smiling at him or just not looking at his face lol ?

[@JawTooth]

I waved to him when he first started and when he went off the track the first time I turned the camera to the side for a few seconds . I don't know if he got embarrassed or not. Hope not.

[@deerepower337]

I’m so glad he’s wearing a hard hat for no reason except looking stupid

[@lesashiminski690]

Hey Jaw tooth he must been embarrassed they should have 2 guys one steer one to guide on track so make sure it's lined up with rails

[@martinfielder-white6539]

Hi JT well what a silly boy he was, and caught on video for all to see!! He will get it right first time next time that he does it. Finally were you doing your weekly shop in the supermarket and did you have a list? Or do you just get what you think is needed?!! Regards Martin 🇬🇧

[@JawTooth]

Yes, the weekly trip to Krogers. I don't make a list. I just see what we need and then fill up the cart. A lot of frozen dinners and twizzlers. lol

[@armageddon1981]

It happens but the UP big boy is on the move!!! I'm on leave of absence right now due to my brother's untimely passing. RIP my brother....ooorah till Valhalla!!!

[@remylopez2408]

armageddon1981 My condolences to you sir on the loss of your brother

[@armageddon1981]

@@remylopez2408 thank you very much

[@marksark1119]

He should have been paying more attention to what HE was doing and NOT what you were doing. What a maroon.

[@josephbennett3482]

He has to be aware of anybody near the tracks since he is an employee of the railroad, and part of their job is to warn anyone that is too close to the tracks or on the tracks to back away for their safety but Also because people that go beyond the crossing limits would be trespassing, but Brian knows that.

[@TheBeeMan1994]

He wouldnt have done this if he actually inspected the wheel when he set on to make sure it wasnt riding the rail, you can clearly see it riding the wheel flange on the railhead. I have never derailed my Hi-Rail, been in a few that got derailed, just have to take a second and pay attention because joint bars and anchors will rip those tires right open

[@maryodonnell6318]

I'm learning hyrail equipment right now and I'd like to know what you mean by the joint bar and and anchors. Right now I'm looking at the impact derailments have on the hyrail equipment.

[@googoo-gjoob]

1:32 the flange of the pass side rear rail wheel is visibly riding the rail. the walk around he performed _the second_ time wouldve saved him from coming off.

[@Cnw8701]

Well, at least now they know there's a defect in the tracks! Lol

[@tmwinkler]

"I coulda used a little more MOW bell."

[@pvaughn155pv]

I instantly see the problem! That truck don't say union Pacific on it.

[@dannyholt105]

Kerplunk!!! Jaw Tooth: It's okay, don't worry! I got it on film! Maintenance Guy: Dagnabbit Jaw Tooth! That was way cool Brian! Hey, I got a short snippet from Railfest 2019 in Plant City up on my site now. Stop by and check it out if you get a chance. Thanks. Cheers, Danny

[@DTD110865]

That was resolved quickly. In recent times I thought it might be fun to have my own SUV with high railers so I could explore abandoned and barely used railroad lines.

[@vondumozze738]

Maybe CSX will have an auction.

[@jayasmrmore3687]

@@Bowdy_Up I’m sure you can somehow get a permit in order to do it legally

[@bettycocker2226]

@@Bowdy_Up fuck the government.

[@bekleidungu.ausrustung7068]

lol, he didn't wave to you this time. It looked like he was muttering a lot of four letter words to himself!!!

[@kenl9780]

I bet he said a few choice words

[@kansasstatealerting2874]

1:54

[@jayasmrmore3687]

If anything is on the track the gates should be down at around 3 minutes why did they go up

[@harryroland5044]

i truly recommend derickwalker454.on I.G...he help me to get back my dad stolen truck back. .

[@ceddyced31]

Looks like a rail gang tie gang foreman riding ahead of machinery.. He was just being lazy about ensuring he was on properly... Equipment in the background was probably pulling up just getting stopped which caused the crossing to activate ...Smart thing for him to put truck on rail while gates are down stopping traffic...

[@ironmatic1]

I'm sure that guy really appreciated being filmed. 🤦‍♂️ This is why railroaders hate foamers.

[@MrWhitelightning73]

Standing up in truck with no seatbelt and driving on tracks 🥹 Safety first 🤷‍♂️

[@zig1497]

And this is the reason why RR employees hate foamers. He broke so many rules that if safety views this video he's in trouble. Nobody wants to go to work and be filmed all day! Employers know the job can't be done safely all the time, they do indeed turn there heads. They can't if we keep posting them on KZbin!

[@luissantiago8544]

That’s too funny that that happened to him I just I don’t understand how people like that keep their jobs but you got people like me trying to get a job with them but they have so many people like him on safe and unprofessional and these people aren’t the nicest people in the world to work with dress married for red dot with that several times with Canadian pacific and that they’re not trying to help anybody else but themselves and I’m pretty sure he still kept his job probably a pad on his back as well

[@Erick-ve1jx]

Just bad luck, it happens

[@erikmcc804]

Wow really, not again just pack it up and go home LOL

[@phoenixman8569]

My apartment is right next to the tracks so I see this type of vehicle around from time to time.....

[@jwaterstraw5029]

i had no idea these trucks existed until the other day when i saw one zoomin down the tracks in my city lol. good video tho! i think its funny that u had to say "but wait theres more!" while u were in the grocery line ahah

[@lucwaugaman4808]

Those people in the grocery store probally had no clue what was happening

[@jamesp13152]

They should do that racing, be more popular than NASCAR. Certainly more exciting.

[@IronhorseRailProductions]

First csx's trains are derailing now there trucks, that's just sad

[@PyroThunder]

Used to live near this crossing 8 years ago. I’d always walk these tracks for old bottles and the old telegraph insulators. The old poles that the insulators used to be on have been long gone since then. I was only 15 at the time. Time goes by fast!

[@noelwright1165]

That was some dodgy ontracking

[@HuntGamingProductions]

must be a rookie or a swift driver

[@jujubee463]

"Sure Wish I Finished Training" Sorry, husband is a truck driver and we always make that joke. 😃

[@HuntGamingProductions]

I have a flashdrive full of swift jokes

[@fluffnose3386]

I still remember to this day when I was little, my grandfather and I went down to the tracks. We sat a while, but then we heard a horn. I immediately lit up. Then a high roller came by. I was so mad. And looking back, I didn’t know high rollers had horns. A little later after that I found a piece of coal by the track. And of course being little I thought it was probably from a steam train. Probably fell out of a hopper or sompin. Great video

[@dominictauane]

But wait there's more

[@JawTooth]

Live Action!

[@dominictauane]

@@JawTooth live acton at Jack lodon

[@dirtthunder1638]

A block and a half from my sisters house. LOL

[@tubehound8]

He was thinking not quite sure why i am being filmed. It is only Jaw tooth

[@herlindajayme6051]

I remember that i saw one of those when i was driving

[@StevesAmericanTrucking]

Oops 😂. Is he a rookie?

[@pacificwarrior7679]

I would be so annoyed by someone with a camera filming me

[@samuelseidel6148]

Are the rubber wheels used to provide motion and stopping? Is the drivetrain connected to the train wheels?

[@rvnmedic1968]

The steel wheels have no power, they are used to guide and keep the truck on the tracks. The truck tires provide the movement as they sit on top of the rails.

[@SKANK_HUNT49]

I don't understand that Wizardry

[@ccaaproduction105]

Thank you for your sharing information.

[@gabrielshupe8927]

He got camera shy and derailed because he knew the King of KZbin was there! Great Video Brian!

[@JawTooth]

Thank you Gabriel! Have a great weekend!

[@captsirl]

WOW Must take years of practice

[@christinawinne1187]

I love csx too

[@jeffreyg3831]

Hi Brian! Nice catch! Gotta love CSX.

[@9005067]

good day i really enjoy your videos

[@TYEemployee]

CSX can't even keep a hy-rail on their tracks let alone their trains.

[@FoardFow]

I"m sure that rail wheels on a truck can break or need maintenance periodically !!

[@rickszabo4312]

Yup,every six months they are inspected and serviced, or sooner if used more frequently, that gear takes about 5 hours to inspect and repack bearings with a few simple repairs.

[@FoardFow]

@@rickszabo4312 ?? Yup ?? is that Polish for yes ?

[@jeffanderlik7695]

Thank God for fast forward

[@over50andfantabulous59]

Thank you so much for sharing. Have a nice weekend.

[@HappyHippos]

That was interesting. Enjoyed watching through the end. Thumbs up 👍🏼👍🏼👍🏼👍🏼

[@9005067]

thanks for sharing

[@herinol]

Live action!

[@9005067]

your welcome sir

[@Mad9977]

interesting, thanks for posting 😎👍

[@jefferydavis5224]

shabonk

[@ianhotson6057]

Some days you're a hero and some days zero zero LOL this happens all the time believe me I've had it happen as a Railroader many times! He didn't do anything wrong

[@jawtooth963]

Live Action!

[@jmm2000]

Shit happens.

[@billsedman4372]

mow probc thanks JT WHAT EDITING system u use ? thanks for comit SCFE US SUGAR. let me know when u come down to s fla.

[@razvandobos9759]

Ever seen those hi-rail truck cranes?

[@JawTooth]

Yes and there is one in todays video at noon

[@LynnCDoyle-ek2oh]

Maybe the next generation of these things they will have some side to side adjustment to line up better with the tracks.

[@michaelweilert1286]

I think Jaw tooth yes you made him nervous and a little RED faced too! have a good one!

[@futurepilot6749]

Cool..

[@dougshrader7721]

I helped build a bridge for CSX back in the winter of 82/83. While on duty you must wear your hard hat while outside the vehicle, even if your in a parking lot miles from the tracks. Hope this video doesn't get him punished.

[@curtis13450]

Csx

[@DruSteel69]

Cool! Transformers more than meets the eye. 😀

[@captainmack2754]

😂🤣😂😂

[@Phillipgraves869]

I do hi rail safeties on these trucks most of them are over wait limits

[@JawTooth]

Interesting. I guess you do training seminars for railroads?

[@Phillipgraves869]

No I work in a truck shop one of our fleets is a rail work company I’m Rafna hi rail certified to do safeties and repairs no seminars or anything....yet lol

[@asmith1201]

Shouldn't he have a spotter

[@asmith1201]

....Im just curious

[@ulibaer57]

Nice footage 😊👍👌 Cheers Ulli

[@MrPeerum]

Ha Brian,i have send you 2 emails,see that one with the Unimog 408 S with train wheels. greetz:Peerke.

[@rvnmedic1968]

I worked for the Mohawk, Adirondack and Northern short line RR out of Utica NY on their track crew. I wish we had electric motors to put the wheels on the track! Had to use a crow bar and put a lot of force on it to lower the wheels. Also derailed a number of times. Always carried blocks of wood to guide the wheels back on the rails.

[@oldbaldfatman2766]

May 8, 2019---Thanks for the video as I always wondered how they did this. Happened to see another video with a big crane & front loaded also with those wheels.

[@Chessie1985]

Great video and sucks he derailed at least it was at crossing wasn't a mayjor thing to get back on track!!

[@Eddy1969]

Wasn't locked in good?

[@Eddy1969]

The UP and metra in Chicago raise the vehicle up.

[@ronfogartyfogarty9362]

The people in that house get a front row seat to some cool stuff wish I lived there keep it up Brian

[@9005067]

I like Jawtooth Videos

[@JawTooth]

Thank you very much Gary!

[@christinashepherd3939]

Let us know where the next video will be it would be cool to see some of this stuff irl

[@ryantheredrailfan2535]

Check out a video I had that was similar to yours from about a month ago. My channel is simply just my name, so it is Ryan Pease a month ago video titled chasing railroad equipment on the CSX railroad from a month ago.

[@JawTooth]

Okay, I will today in a little bit.

[@ryantheredrailfan2535]

Thanks. Jaw Tooth.

[@leonardovalladares4315]

😂😂🤣🤣😂🤣😂 if i was him i would been saying wtf plus more

[@jake2213b]

You are in my old run around area. I also had my first job not to far down the line from that area.

[@bighueso2428]

You forgot to say, “but wait! There’s moooore!!”

[@stanpatterson5033]

May the fourth be with you.

[@gilleslanher1047]

Bonsoir Jaw le véhicule de maintenance CSX c'est tres pratique et rapide pour se mettre en position sur les rails mais interdit pour les promenades donc la suite de la premiére vidéo sera consacré je pense aux materiels de maintenances, bonne journée et bonnes ballades Jaw merci à vous @ +

[@HighRail62]

Good one,Bro. Thanks for the share!! :)

[@HolidayDecorator]

Poor guy, I'll bet that bump didn't feel too well either. bad enough if you drop off a road, but railroad tracks a whole different thing when you drop off those. LOL Will be anticipating and waiting for hat MoW video. I might be able to help identify some of those MoW cars{but no guarantees.}. When they replaced the tracks in my area to get the area ready for SunRail, I talked to a lot of the MoW guys that operated many of those things and learned what they are and what they do. Now if I can just remember all they told me and which MoW car is which and what it does. LOL

[@JawTooth]

Check back in ten hours at noon and see how many you can identify. A few of them I have no idea what they are