Best And Worst Screen Protectors For Samsung Galaxy S23 Ultra

[@HighTechCheck]

🚨 Best & Worst Cases For Samsung Galaxy S23 Ultra - kzbin.info/www/bejne/kJ3MqZ2qmsyobNk🚨

[@chriskinson1]

THis is an immense amount of work, ty

[@achmadfauzi5799]

​

[@achmadfauzi5799]

​

[@achmadfauzi5799]

​

[@achmadfauzi5799]

​@Chris Kinson

[@netflixaccount3448]

My man made a full length hollywood movie out of Screen protectors. Keep it up

[@subguy3020]

😂

[@elejogun11]

😆😆😆😆😆😆😆😆😅

[@kerplop2263]

The fact that you were thorough enough to show the removal of the tempered glass screen with liquid adhesive was very helpful. I always wondered what the aftermath would be as far as residue and how difficult it would be to remove one of those. also, the fact that you re-registered your fingerprints to show exactly how they work with the screen protector was exactly what I'm looking for in a thorough video. thank you for the quality content!

[@mustbescud]

What is the time stamp of the removal?

[@emperadorcarlos7262]

I used to hate film screen protectors after having a bad experience with Spigen (wet installation type). But after having tried other film screen protectors (non wet type), I think they are okay. The performance pretty much reminds me of the factory-installed screen protectors that the Note 10 Plus used to have.

[@Sunndreamn]

I just upgraded from the note 10 plus and that is the exact type of screen protector I'm looking for. What do you recommend??

[@M0_305]

​@@Sunndreamnwhitestone dome film , dont look further

[@Sunndreamn]

@@M0_305 thanks! Just ordered it!

[@shubhankarsse]

​@@M0_305does the Whitestone dome have any black borders around the camera hole or around the sides of the screen? It's my main issue with tempered glass screen protectors

[@sergiosanchez3777]

@@M0_305 on my note 20 ultra although i followed the instructions to remove it when it broke, what it did was fragment into a thousand pieces that i had to scrape with a blade

[@vicious141]

I cannot believe the amount of time that this video must have taken to make, Thank you for your Excellent work.

[@Glupkomatun]

His life work

[@tastyoldgravy]

I have the Ultra on order and already have the Whitestone Dome Glass ready to go.. Been using on several phones and it’s just brilliant.. It even saved my S20 Ultra when the Dome Glass cracked after a fall but the screen underneath was just fine..

[@mauricedebruin4424]

Yea, your phone probably wouldve survived without the glass aswell. My experience i dropped my s10 without glass multiple times with bo problems. Dropped my s7 with glass and every drop the glass seemed to break resulting in a costly reshielding. Once i stopped i still dropped the phone multiple times and it never broke the glass. So I feel like the "glass" protection only works well against scratches.

[@michialphelps2339]

Just get the samsung leather case with no screen protector or Dbrand or whatever

[@tastyoldgravy]

@GabbyPhelps2339 I'm not using a case on my S23 U. It's already massive, don't want to make it even bigger.

[@furret72]

Baba booey

[@mikedowell8465]

I just purchased the S23 and have not yet ordered a screen protector but I'm thinking about getting amFilm Hybrid Screen Protector

[@chubbyjohnson5480]

I really appreciate your honesty and frankness. If it's garbage, call it garbage

[@JoZibi]

I just discovered you randomly on KZbin while I was searching for S23 Ultra accessories (I got the S23 Ultra) - I‘m considering myself a „smartphone accessory enthusiast“ if that’s a thing 😅 I’m really impressed how much effort you put in this video, I also watched your 2 hours S23 Ultra cases video of you - I watched both of them full length, awesome work 👍🏼 I‘ve never seen someone reviewing and comparing so many cases/screen protectors in one video, and I was really surprised how much good screen protectors there are for the S23 Ultra (due to the curved screen). You definitely got a new subscriber with me 👍🏼 Great 👍🏼 I myself am using the Supcase UB Pro for my S23 Ultra (with the integrated screen protector), really happy with it.

[@231a]

Great video! I do appreciate easy installation. However, I primarily want to make sure that my actual phone's screen won't crack or chip if dropped with a screen protector, from height, onto something like rough asphalt... I would like to see how the non-tempered glass varieties hold up to such impact!

[@Uzishan]

normally one of the roles of a case is to weight it down on other sides to prevent the screen hitting the ground. but I can tell you the foil ones won't protect from a crack in something that is somewhat sharper and will hit the screen (though usually worst cracks come from having the phone fall on the sides.

[@marcellusrobinson568]

You created this video like it was for your 89 year old grandma! Thank you, thank you, thank you!!!

[@susanvermeza1]

Right! And that's why it was so easy to follow and learn from. He must love his Grandma!

[@MrGiftedhands11]

With the IMBZBK screen protector, it covers the front camera. Unlike other screen protectors that have a cutout for the camera. Do you notice any difference in the quality of pictures?

[@John-sn4hl]

What's your top 3? Also which one has the lowest drag and feels most like the real screen?

[@FlamboyantChamp]

yea

[@backpacksash4866]

I'm using the clear version of the MOWEI and it worked like charm with the installation, the fingerprint, s-pen and all the cases I use. Installation is easy If you do everything calm and collected. Great video and overview for all the options.

[@Harlow_Khmer]

Do you know if it works with an otterbox case? Their heavy duty defender case

[@darlastarbuck]

It worked well for me, too. But then the corner came up when I put a case on. I fixed it and tried a more loose case and it came up in the same place, too. Rats!

[@DrewDawg733]

It seemed that you really liked the Milomdoi no adhesive tempered glass the most (2 thumbs up). Was there a reason you put it in its own category when judging at the end of the video. Is there a reason that someone may want one that uses liquid adhesive? Because if the Milomdoi performed so well and did not use liquid adhesive, I would think it would be ranked #1 if you combined both tempered glass categories at the end. Or was it the case that Milomdoi was not as good as the other tempered glass protectors, but got bonus points for no liquid adhesive hassle? Have come across so many terrible videos while looking for cases and screen protectors. This was a breath of fresh air and super professional. You have a new subscriber here. If you did a s23 ultra case review, I'll be checking that out next!

[@rossauce12]

Ya what happened he said 2 thumbs up in the video then gave it a thumbs down overall

[@Ron-In-Reno]

With respect to bulky/expensive kits, it would be helpful to know if supplies can be ordered separately without going to the expense of reordering the entire kit every time we need more tempered glass or UV glue. This would help make an informed decision on whether to invest in a pricey kit. A good analogy would be like purchasing a new car every time it needed it's tires replaced just because they can't be purchased separately.

[@Samthenega]

True

[@jasonk.3182]

@@Samthenega Whtiestone has a replacement warranty. Use another phone, take a picture of the broken Whitestone Dome glass and they will send you a new screen protector/installation kit for one. Then you rip off the broken one, install the second one that came in the kit while they send you another replacement. You always have one spare on hand.

[@DMcDaniel1984]

I'm done with Whitestone. Filed a warrant and they sent me the wrong replacement then refused to respond to my concerns. Had to file a claim through PayPal to get the shipping and handling costs back. Their customer service has gone in the toilet.

[@mav48185]

Samsung needs to drop the curved screen. I'm over it. Liked it back in the day but for screen protectors it's a no

[@pcoronelpc]

I feel you

[@smcewen7]

Yeah same here, I don't know anyone that ever bought a curved screen TV either.

[@mav48185]

@@smcewen7 lol I haven't. I heard it's not all that anyway or causes a glare

[@invinsible1987]

Nobody cares

[@mav48185]

@@invinsible1987 obviously you cared enough to respond 💀🤡

[@coachmattc]

I'm very interested in the Whitestone Dome Glass. What scared me was the large piece of dust that wound up under it near the camera. You say that is not the protectors fault. However, it seems it was the install kits fault. When you slide the plastic key that holds the protector up, it looks like that piece of dust was in the slot that the key passes through and is pushed onto your screen at that moment. (2:12:27) Thank you for your time and effort in making this video. Based on this, I am going to order it.

[@hobbitpsi]

White dome is the messiest of all the liquis UV screen protectors.

[@Tornado_Mang]

@@hobbitpsi I actually just came back from putting one on, it was barely messy

[@hobbitpsi]

@@Tornado_Mang lucky you bro. I've done it for three phones and good god after the screen went down and the UV was done and I pulled the phone out, the adhesive was everywhere.

[@coachmattc]

I wound up getting it for my Galaxy S23 Ultra My wife installed it on hers before I was able to install it on mine. She has no trouble and is loving the results.

[@patotv1087]

​@@hobbitpsiskill issue

[@darlenerich3229]

I had purchased the Coliary ultra screen protector with the 9H tempered glass. Found it one of the easiest ones to place. Finger print was a little difficult but registered. Thank you for sharing. Great job!

[@elasticatesting0239]

BLRAutomation BlockUploadFileEOE secret MyNewDLPKeyword

[@elasticatesting0239]

BlockUploadFileEOE

[@elasticatesting0239]

secret

[@borderlessniko]

Went with Milomdoi Tempered glass screen protector after your video works great no bubbles ( just to small dust pieces that I can live with) but the finger print scanner isn't working as well as I would of hoped , its more hit and miss, even after adding freshing prints multiple times and increasing the sensitivity. but overall would still recommend it.

[@HighTechCheck]

Are you fingers dry? My fingerprints usually have issues when my hands are dry. If that’s the case try a bit of moisturizer and see if it helps.

[@borderlessniko]

I ended up redoing the prints and pushing really hard during the scans , it seems to work much more consistently now

[@shinyobsessed1271]

I went with that one, too, and installation went great. However, every time I tried to put my Spigen case on, the screen protector would lift at the corners, basically rendering it useless. Do you know of a good case that won't affect the screen protector?

[@hexiler]

My only problem is that the spigen case I bought pushes and lifts the tempered glass protector so I need to change one of it. Any tempered glass screen protector and case recommendation together? As I am worried the not tempered glass screen protectors will not protect against drop.

[@shinyobsessed1271]

@@hexiler I had the same problem. I finally ended up getting brave enough to order and install the Whitestone Dome screen protector, and I then paired it with an Otterbox Commuter case. No problems at all, perhaps with the exception of finding that it is perhaps a wee bit easier than I'd like to pop my phone out of that particular Otterbox case. This solution was a little bit pricey, though, but at least my phone is now protected.

[@lunaticleone8534]

Just earned a subscriber, super useful, did so many times and it's so nice to actually see what it looks like and not edited videos from certain angles by the manufacture

[@KatrinaHawkins-j3k]

Thank you for taking the time to create this video. I tried to give the first screen protector I bought a chance but after 2 days I tossed it into the trash and started searching for a new one. I came across your video and decided to purchase the Milomdoi because I prefer tempered glass but I didn't want the mess of applying a liquid. I also liked how it seemed to apply like a film even though it was tempered glass. Thank you! Thank you! Thank you! I watched the installation video they suggested first. Then I watched the video as I was doing the actual installation. It came out perfect. I had 2 tiny bubbles. One in the middle of the screen and one near the camera but I was able to smooth them out using the tools that came with the kit. My case went on with no issue, the screen is bubble free and best of all the finger print scanner works! For people having an issue with the finger print scanner your finger cannot be dry. As long as your finger has moisture it will work. Its been on a week so far with no issues.

[@alfredoalejandro87]

Hey man how's the screen protector coming along? Thinking of getting the Milomdoi one you have but unsure as I don't want to touch the UV stuff.

[@KatrinaHawkins-j3k]

No issues so far. Screen is still free of bubbles and fingerprint scanner still works.

[@Gael32]

Thank you for this video. I was beginning to feel overwhelmed by the abundance of screen protector videos that wouldn't get straight to the point and were more opinion pieces than actual tests. You were able to steer me away from the films, which to be fair could have worked, and I instead decided to purchase the Whitestone Dome Glass with liquid adhesive. I got the S23 Ultra as a gift to give on Mother's Day but once I remembered that she keeps her phone in her purse, I realized I had to get a screen protector as well. Great video, and thanks again for all the great information plus physical tests with cases.

[@HighTechCheck]

You are most welcome, I think you made a good choice. Whitestone is definitely one of my goto’s. Thank you for your support, I really appreciate it.

[@btodsk]

That liquid will mess up the screen if you want to remove it? Or not?

[@Mob3tta_01]

I went with the gatatol liquid adhesive. I tried whitestone dome in the past never worked out for me. This one was perfect my first try and so far i ❤ it and also it is a full screen protector no camera cut out or fingerprint hole

[@skylarjones3040]

Got my S23 upon release week. My case worked great enough protecting it. I dropped it in my sink (brushing my teeth 😂) so now I'm watching this video after the screen broke. Thanks for taking the time to do this!

[@Guilherme_Oliveira72]

The milomdoi is just great!!! the installation was really simple and with no bubbles, the feel is also the best I've ever tested.

[@HighTechCheck]

Great to hear! Thank you for the feedback and support

[@JettaNatioN]

Thanks to your recommendation, I got the Ringke Privacy Dual Wing screen protector and I must say that I love it so far. Thank you for going through the trouble of putting and removing the protectors while also letting people know about all these wonderful screen protectors.

[@HighTechCheck]

Great to hear! Thank you for your support.

[@MastiffRonin]

i got the milomdoi and it went on flawless! wish the edges were clear not black feel like its blocking the screen just slightly. but so far the best i have used. Fyi does not work with spigen tough armor case edges get pushed up

[@HighTechCheck]

Well that’s great news except for the case, it’s hard to know how it’s going to work out with everyone’s case . Unfortunately the only way to know is to try it but I love the protector.

[@whysoserious86]

Good thing I saw this when I did. I had just ordered it and I do have the spigen tough armor case. Been having a time with the screen protectors that have the fingerprint cutout not sticking properly or something. I can't even register a fingerprint with them. Not sure I want a film as I feel like that doesn't offer much protection. I was thinking the ones that come with the Uv light were a gimmick.

[@lorblacor]

Thank you for all the help. You've certainly done a great job of giving us important information in an understandable and detailed way.

[@HighTechCheck]

Thank you for your support, comments like this make all the hard work worth it 😊

[@mutovkin]

Got the Milomdoi screen as recomended in this video - a much better screen than AACL. However, it is also 0.5-1mm bigger on the sides than AACL and DOES NOT WORK WITH SPIGEN cases. Spigen cases poped Milomdoi glass off the screen immediately, I tried to press carefully while push the side of the case out and the glass cracked on me. Really disappointed as Spigen cases are very popular and of very high quality. Fingerprint sensor works for my wife but not for me, one is 3 or 4 attempts it detects my fingerprint right.

[@HighTechCheck]

I’m sorry to hear that it doesn’t work with your case. As far as the fingerprint scanner goes, I find that when my fingers are super dry the sensor has trouble reading my prints.

[@mutovkin]

@HighTechCheck Thank you I also think it is moisture related. I find it funny how most reviews mention this sensor as some kind of second coming as compared to optical and yet my previous S20FE was faster and more reliable and the same with OnePlus 6T.

[@AlvinPSL]

Coming from an Oppo phone, I find the Samsung fingerprint reader slow and not accurate... Oppo reader is instantaneous, whereas Samsung needs you to press with some pressure..

[@Nomreh]

​@@HighTechCheck Do you have any suggestions on screen protectors for spigen cases?

[@peaceLove1988]

😢 Yes just wasted £27.00

[@BoaStoryTV]

thanks so much for making this video, just got the S23 ultra and it was very difficult to find a glass protector that did not have the circle hole! Just ordered the Milomdo . EDIT:UPDATE: i had to return them, it was too difficult to install and kept cracking. maybe i wasn't careful enough but i 100% followed your video step by step and could not replicate the results. i actually ordered it TWICE, meaning after trying 4x tries i could not make it work. it either had remaining bubbles or the edge cracked during pressing the side bubbles out. currently using the phone without any screen protector, just don't give a damn anymore. i figure if they are that flimsy i don't see how much it would protect the screen during an impact anyway. thanks for the video nevertheless! 🍺

[@alexisss91]

I had the same problem too with that brand. Ordered twice and they are super delicate. One small tap can crack it 🙃

[@BoaStoryTV]

@@alexisss91 i know right! doesnt matter to me anymore, im done 😂

[@0hface]

I have the spiegen neoflex. What bothers me is that it doesn't go over the curved edges. I use the edge panel and gestures instead oh the home/ back buttons, and the edge of the screen protector is very thick. That bothered me a lot, but the edge seems to get better with time, i must say.

[@gibowski9206]

Interesting that you did not include Samsung’s official screen protector. Great video still!

[@SadalDay]

would be nice if it shipped with said official

[@patrickmelson4745]

Reviews are not good. On Samsung web site. S23 ultra

[@BrainFlowLP]

Hi! Thanks for review. So, which one would you suggest to use with Spigen Rugged Armor? Non tempered glass(dont want problems with fingerprint scanner), WITH camera cutout, and WIHTOUT fingerpring cutout. Thanks in advance!

[@luisarroyo5480]

Which screen protector is best for the spigen rugged case?

[@koharu.mochii]

just bought this phone in Lavender, and primarily I use tempered glass protectors because they work best vs the film ones. This video was extremely helpful showing application, recommendations, and links for where to buy. Thanks so much!

[@koharu.mochii]

@@moonrise258 for me the tempered glass is better because im clumsy and drop my phone a-lot. I dont like the film covers because when my phone drops I get the cracks underneath and the film helps it stay together but essentially I need to replace the phone. Hope this helps! :)

[@kevinnguyen1595]

@@moonrise258 did you find out

[@daryllbersamina]

Man I can't believe I watched the entire video 😅 thank you very much for making content out of these screen protectors. It's really helpful!

[@marymadigan9707]

As always you go above and beyond with the screen protector and cases thanks very much as always 😎🇮🇪👏

[@mantanna2]

I have now refrenced this video three times to help me put my third screen on. It is a fantastic video and I thank you for it.

[@HighTechCheck]

You're very welcome! Thank you for your support ❤️

[@e36boy]

I always buy Whitestone dome but they are pricey. I want to try the milomdoi since you don't need adhesive

[@fedlago74]

You are the de facto expert on screen protection products for new phones, a huge resource for the online consumer.

[@m.s.g.k.]

Milomdoi glass screen proctor is great. but im having hard time finding out which case to use. may I know which one you are using in the video? I tried spigen ultra hybrid, it lifts up the Milomdoi glass edges. Thank you.

[@AnnaEQ2]

Thank you for this video. You presented the information with just the right level detail. I liked most of all that you spoke at a normal human speed, so that I didn't have to rewind in order to understand you. The editing for time was well done. Definitely worth a thumbs up and subscription with notifications.

[@livelyupyourbreath4467]

Thank you for a great video and going through the trouble of actually testing out the screen protectors! It really helped me in deciding which one to purchase. I am hoping to try the Milomdoi protector.

[@CiudadanoChris]

I just got my new S23 Ultra. Do you recommend removing the plastic protector from the frame or leave it as long as it last?

[@HighTechCheck]

If you’re talking about on the sides of the phone, I just leave it on for protection. Are you going to put it in a case?

[@martinrolandbone]

I always enjoy watching your screen protectors videos. I bought the S23 Ultra but returned because of the curved screen, i really hope for the S24 Ultra to go all the way flat. Ordered a S23 Plus instead, hope you make a screen protector video for the Plus! Greetings from Uruguay!

[@Vish________]

Broh returned the horse 🐎 and got the pony 🫏 instead....😂

[@SteveF69]

One of the best videos that cover so many screen options, thanks ! i look forward to this video every year.

[@HighTechCheck]

Thank you for your support Steve. That’s why I do these videos, for my viewers like you. This year’s screen protector and case videos are the longest I’ve made so far.

[@ROTTENCORPSE]

Magic John... quality or hype?

[@AlexAugustinex]

You are forced to use Screen protectors for S23 ultra cause the Victus 2 has zero scratch resistance. 5 days in and already got 3 scratches taking it in and out of pocket.

[@HighTechCheck]

I’m sorry to hear that, that is the most frustrating thing for me as well. All these years of technology and the screen can’t withstand micro scratches.

[@justanotherguyful]

That is insane, I dont know how to react to that, I got my 23 ultra delivered today and i am not sure if I should keep it because this screen protector issue is a nightmare, especially paired with the fact that you ABSOLUTELY NEED a screen protector... what a shit screen that is... how tf can a 1500$ phone have an issue my 5 yead old oneplus 6 doesnt? Phones just suck nowadays.

[@aka1721]

​@@HighTechCheckbecause glass back then was much more prone to shatter than scratch because it was rougher gorilla glass nowadays is much smoother and softer so its much more prone to scratches but less prone to cracks. You can't have both on glass

[@davidrogers3920]

Thanks for a great video! I bought a case protector that has a screen protector built in, but the fingerprint sensor can be seen when watching videos etc at certain angles and lighting. Do you see the fingerprint sensor area when you have a tempered glass screen protector installed, like the AmFilm glass or the Whitestone Dome Glass?

[@chargv]

No. What you see is glue that some screen protectors use on the fingerprint sensor area to improve the contact between the phone and the screen protector. Every screen protector that uses liquid adhesive doesn't use this trick, so you won't have the same problem.

[@merudra747]

What case are you using on your phone? I got a spigen clear case and it popped the milmodoi screen protector right off. I'm looking for a different case now.

[@JaydenTerry-do1hy]

I actually purchased the Milomdoi before watching this video. I was also surprised that it was a tempered glass protector that was compatible with the fingerprint scanner. I was so excited when I found it, but I was having so many problems with the scanner. I just couldn't get it to work. I thought it was the protector itself, so I watched this video to find another, but after seeing this, I found the problem. I realized it couldn't be the protector considering the review, and I found out I had a pretty sizeable scrape on my thumb, so I tried my left thumb instead, and it works like a charm now! My only complaint now is that it covers the front camera, so it's prone to being smudged, making the front camera a little tricky. I love Samsung, but the screen protector situation on the ultra is so tricky. I had the fold 4 for a short time, and the fingerprint reader on that, in my opinion, was in a much better location. Thanks so much fkr this video. You're a life saver! Now it's time to watch the case video!!!! ❤️

[@HighTechCheck]

Thank you for the support , I agree totally about the scanner placement . They have scanners that are actually much bigger that take up a large portion of the bottom of the phones screen, I don’t know why Samsung doesn’t use them.I’m glad you were able to get the fingerprint scanner to work on this protector, I love it myself. Case video is going to be massive, it will be out hopefully by Sunday.

[@tsarminaX2]

@@HighTechCheck can you make a video of what case fits without lifting the milo tempered glass

[@joshualaird5303]

@@tsarminaX2 I can tell you the Speigen Hybrid does not... I would expect the same from most of the Speigen lineup... Fortunatly Milomdoi refunded my money with no questions

[@tsarminaX2]

@@joshualaird5303 I went ahead and bought the s23+ to avoid all these problems

[@HavLnt]

​@Joshua Laird do spigen cases lift the milomdoi screen protector?

[@flitecontrol9137]

Which tempered glass screen protector would you say allows for max screen touch sensitivity? Mine seems makes it hard to select things.... and I have enabled the screen protector display option that helps some by not enough. Thank you for your input and help

[@Garrett1974]

Super as usual, got the Mowei clear for 25 euros, that's basically a steal, thanks for your effort 👍👌

[@hbhavsi]

Any updates on your daily use screen protector after a week? My AmFilm tempered glass one is starting to peel off, and I haven't started using the phone as a daily phone yet lol.

[@Electromech]

the reviews on amazon paint a bleak picture for AmFilm at 2.1 stars

[@the_1_omega10]

Love these videos! Can't wait for the case video! I personally use the Ringke Easy Wing protector!

[@HighTechCheck]

I’m working on the case video right now. It’s going to be the largest Case video. I’ve made so far. Thank you for your support!

[@Johnmims65]

​@HighTechCheck which one was your favorite out of all of these?

[@FNFUP]

you are awesome mate. Thank you for taking the time to thoroughly review all these protectors. Cheers

[@HighTechCheck]

Thank you and thank you for your support! I try to help the best that I can.

[@hailieblair]

Thank you so much for you informative amazing video I’m getting the 23 ultra this Friday and I want to go ahead and order a screen protector I was doing my own research before coming across your video and seen comments about certain screen protectors not working with cases so this video definitely narrowed down my search thank you again !!! I’ve liked and subscribed 💜💜

[@AftermathXJ220]

2:21:18 Shaving right after shower reduced if not eliminates razor burn

[@Xxblaze191x]

I've always preferred the wet install film protectors cause if you mess up the install you just peel it off and try again

[@michaelreed649]

I can't wait for Samsung to drop the curved edge. Thank you for this video. The information is very valuable.

[@Hatie123]

Great review of all the protectors as there are so many on the market. I prefer the Walmart Onn Hybrid screen protector. I have used them for over 6 years with Note 9, Note 20 & now the S23 Ultra. I love how the screen feels as tempered glass is way too slick for me. Never had to replace the protectors with the 2 Notes. Even had my cat decide to bite down on the corner with his fang. No damage to the phone & within 24hrs the screen protector healed itself so you couldn't even tell it happened. Never had an issue with cases. I prefer to use the Ringke Fusion-X. No issue with the protector raising on any side. I use the s-pen daily & it works great. For only $17 you get a film with the durability of tempered glass.

[@SadalDay]

naughty kitty

[@TheVandaLen20]

​@@IAmHarryNguyenringke is the case they're using with the onn screen protector

[@Hatie123]

@@IAmHarryNguyen Fusion X the durable case where the Onn Hybrid is just the screen cover

[@cresnicke]

Wow, amazing video! Clear, thorough explanations and demonstrations, clean graphics that don't interfere with the useful content, and a real human element rather than feeling like a used car salesman trying to pitch something at you. Liked & subscribed.

[@prypiat27]

Now that is commitment. Give this man an award

[@brentonwhitten8131]

Tried 4 the Whitestone uv film protector, the cent crease didn't fade away on any of them if anything it only became more pronounced. It does create pixel distortion as well, everything else about it was great but the crease was a deal breaker for me

[@breyton490]

Milomdoi Tempered glass screen protector - Awesome screen protector, BUT it is not compatible with most phone cases. The phone case will cause the sides of the screen protector to bubble and separate from the phone. If you are not using a phone case, then this screen protector is great - if you do use a phone case, good luck finding a case that does not cause the screen protector to separate from the phone along the sides.

[@iamnotkurtcobain]

Thanks for the great video! Which one do you prefer, amfilm tempered glass or whitedome?

[@JayseB1111]

I haven't watch it yet but to give everybody a heads-up - the zagg xtr2 I'm using for a week retains every bit of finger print oil you give it. It's so bad, all I can see even after wiping it off is the oily streaks and fingerprints I just put on

[@_rinrin6150]

i always love to watch your videos, but i just bought a s23ultra, so this time i gotta watch with more attention, keep up with the good work!!

[@fergaldoonan5087]

Dear sir, I was just wondering about the amfilm glass protector. Is the upper ear speaker protected from residue?

[@LIDigga]

You my man are AWESOME!! I went with the Milomdoi at your recommendation and I couldn't be happier. Install was simple no bubbles no dust spots its absolutely PERFECT! It is very inexpensive and works PERFECTLY I couldn't be happier!!Thanks for taking the time...👍

[@brothermist0]

I purchased the Milomdoi Tempered glass screen protectors after seeing this video. They DO NOT work with any of the Spigen cases or with the MagBak case for the S23 Ultra. The protector is great until you put a snug stiff bodied case on it. Then both sides push up off of the screen.

[@marvinhensbergen1515]

My main question is.. Whats the difference than between the best screenprojector with and without liquid adhesive, is the liquid adhesive worth it? And what are the main differences between film and glass protectors?

[@7eventyn]

Sadly I couldn't find Milomdoi TG in my country, so what's your second best suggestion for tempered glass protector?

[@3borijess]

Amfilm was my go to screen protector but that has changed this year with s23 ultra. The amfilm is garbage, and the process and glue must be cheaper this year. The protector starts to come off after one day.

[@jasonsantos4186]

He instalado el Neo Flex de Spigen en varios dispositivos, han funcionado bien y por he podido colocar de forma perfecta sin problemas, un tip para esto es hacer la instalación con un cover puesto ya que será una pequeña guía. Ir sacando el agua poco a poco y no todo de golpe, así no se moverá tanto y podrás colocarlo perfecto mientras queda algo de líquido debajo. Es ahí donde aprietas un poco con una mano y terminas de sacar líquido con la otra

[@juliap.1007]

Thanks for the video, I really appreciate it. The best and worst protector are mixed up on the timestamps though. I got the Milomdoi after watching and I am impressed how smoth it works. If you do not get good results with transmission between glass and display at first just wait a couple of minutes and it will turn out to be perfect.

[@welington2257]

I’m thrilled with the fast improvements I’m seeing in my health. These natural products are fantastic.

[@animalmania2381]

My question is always what they are like to remove when you need to replace them. My one bug bare with tempered glass is that sometimes the adhesive is a nightmare to remove and I risk scratching my screen in the process

[@HighTechCheck]

The liquid adhesive screens aren’t horrible to lift if you work around the edges, the milimodo protector however uses stronger than normal adhesive so it was more difficult to remove. I ended up shattering the screen when taking it off then just ran the phone under some water to remove and glass dust remaining.

[@stevehan3809]

Thank you very much for recommending Whitestone UV Gem Film and Dome Glass

[@shadjrr114]

What case are you using with the mowei clear glass screen protector?

[@stason99]

Thanks you for the video. It would be nice to test longevity of these screen protectors.

[@fossiltkm]

As always, Great and informative video, my friend! Keep up the fantastic work.

[@HighTechCheck]

Thank you so much for the comment and your support. I really appreciate it.

[@G-O-N-x]

What would be your overall recommendation ?? I'm hesitating between Milomdoi tempered glass, Gatatol Glass and MOWEI Clear glass. Milomdoi seems really good espacially knowing is 2x cheaper than the others 2

[@sayhowling]

im buying the milomdoi. Mrwhostheboss made a test about tempered glasses before and the TLDR is; tempered glass price doesnt matter as long as it's below $60. theyre all the same. now $80 sapphire is THE REAL DEAL. if you have extra buck for it

[@HighTechCheck]

After testing the Milomdoi I was blown away and that is my top pick.

[@G-O-N-x]

@@HighTechCheck Nice, gonna go for it then, i just hope it fits my UAG pathfinder case lol..

[@G-O-N-x]

@@sayhowling Yeah....no. I dont wanna spend that much haha

[@SadalDay]

@@HighTechCheck if you link it i will give you my commission never mind found it in description

[@davidb2]

Incredible video, so thorough. Thank you for the help! Is there a reason you didn't like the Gatatol over the other liquid adhesive ones? It looked very similar and possibly had better scratch resistance.

[@HighTechCheck]

Mainly because of the installation issues with the liquid and the specs of no adhesive under the glass.

[@Cryptochinodotsol]

​@@HighTechCheckWith the unicorn number 81 you absolutely love. That's the one I fell in that way I increase my Touch sensitivity and try to register my prints. It wouldn't even read it any ideas great video. Bye? The way.

[@lynnhorner7646]

very helpful in saving me money and time in deciding on both a screen protector and a case...Thanks

[@CJxSutton]

Great helpful video but one thing I'd recommend next time is setting a light colored background or at least opening a file or video with a white background so we can see if the screen protector ends at the top before the actual display ends. Can't see that at all with your black display background up against the black screen borders. 2 of mine now have left a very slight sliver there at the top and it drives my OCD crazy seeing that shine through. I don't understand why so many of them are leaving so much more space at the top than the bottom

[@samanthah2226]

I have been waiting for this video! Your amazing for doing all this work.

[@rahulpawar9036]

Thanks a lot. When we use UV screen protector we just have to cover finger scanner for first healing then the finger scanning issue will be solved, correct?

[@erichollimon5148]

Got an incredible deal on this S23 Ultrs and this video leaves me with a question if you know or please offer your expert opinion will the Whitestone Dome Glass work with the Ringke Dual Wing Privacy screen protector to add the ultimate protection win base layer from WSDGSCP and RDWPSC for the privacy and the fingerprint sensor still work as intended in your best opinion?

[@Ron-In-Reno]

Excellent work at reviewing these screen protectors. However, I would recommend turning the cell phone off while installing any screen protector.

[@mochimasan]

I absolutely hate the camera cutouts on screen protectors😢 They are so annoying. Idk why they do that like the camera is under the glass and dust collects in that hole or dirt or water. The only screen protectors where I live that didnt have the cutout was a 2€ screen protector from aliexpress,...BUT it didnt have a guide to put it on straight so it was uneven and if something is uneven my brain wants to smash it so I took it off 😂😂😂

[@HighTechCheck]

😂 I feel the same way, I’d rather have the whole screen covered, the cutouts collect dust and crap.

[@soorajbala1089]

That effort.. making such lengthy video. Hats off mate

[@joepham198]

Great video and content thank you so much! You came in clutch!

[@AndrewAuff]

IMBZBK FTW!!..Im in awe...well except for the name haha...could not have had such an successful install if it wasn't for this video, keep the awesome work, looking forward to more content!

[@sebastian4024]

It‘s just strange that the Milomdoi got many positive reviews on the english Amazon page but not good reviews on the German Amazon page. From your video I‘d order the Milomdoi but I hesitate because of the bad reviews here in Germany

[@DMarie2000]

There are also several mentions of having issues with the FP scanning after installing that protector, even after re-registering & upping the sensitivity. I believe the rating in the product description for the FP scanner was like 2.7.. I was also going to go with that brand until I saw the reviews. Now, I'm still undecided bc I use my FP heavily.

[@sebastian4024]

@@DMarie2000 I ordered IT and can confirm FP scanning is horrible. Don't buy Milomdoi!

[@jcml1326]

Hi! I terribly messed up installing my Spigen screen protector. To remove, should I still use the spray to soften it up or just peeling it will do? Thanks!

[@HighTechCheck]

The only way the spray will help is if you can get it under the screen protector, it will just peel off but I’m not sure if it will be useable after that. I wish I could give you a better answer but I’ve never tried to fix it once it’s dried.

[@jcml1326]

@@HighTechCheck got it. Thanks! Will try it peeling it off then. :)

[@edwardshen2531]

Love this video would be great to have top 3 you recommend

[@WokenessisMentalillness]

Whitestone - Liquid Gel - Tempered Glass is by far the best.

[@koptill]

Was until this phone. Now Whitestone sucks

[@Xialoh]

@@koptill And...why do you say that? And what's better?

[@Ollie_77]

​@@Xialoh they've changed the adhesive and lots of people have had issues with it

[@hisokacousin]

Thank you for taking the time to make this video. I just purchased the PowerPeak screen protector based on your review.

[@HighTechCheck]

Thank you for your support! Hope you enjoy it.

[@Braindog]

Hello, I took note of your recommendation at the end of the video about the Mildomi 9h screen protection without liquid and was not disappointed. The installation was extremely easy and quick. The scope of delivery for the price is unbeatable. If nothing happens to the display when it falls, I'll be more than happy ;) Thank you for this Video, uu saved me Money and testing. Greetings Braindog