EPSON Ecotank Sublimation Printer Problems & Fixes

[@lindawatson7399]

Thank you so much for your video! Power cleaning took care of my issue. I found another video on how to do that. Go to the power clean screen, then turn off the printer. Next, hold the help button and power button when turning the printer back on. It then allows you to perform the power clean cycle. I let mine sit overnight before performing a nozzle check. It wasn't perfect, but my missing colors were back. After printing a couple of pages, everything looks great!

[@Dealerschoicegifts]

hi linda thanks for your comment to this video...i couldnt figue out how to do a power cleaning i kept getting a message to go to epson website..i was getting so frustrated!!! so as usual i came to youtube for help and found this! your comment with the turn it offf and turn it back on with the power and help buttlon did the trick and its doing the power cleaning now!!

[@pattyshorter8039]

@@Dealerschoicegifts m

[@ladychina822]

Doing this now!

[@chica1girl2]

Thanks so much

[@Susy_lh]

Thank you

[@fridaylakephotography7463]

WOW!! Thanks alot! I have an Epson ET-4700. This process worked for my printer as well. I had an order of 36 custom mugs from my mug store. In the middle of the prints I noticed my color as fading HORRIBLY. I've done hundreds of prints without this happening. Your video helped. I cleaned the heads 7 times, performing a nozzle check after each clean. Finally my color was restored. Thanks again!!!

[@bimmerZ007]

Sound like exactly my printer doing!! I’m not alone!! 😅 I will try!

[@AnimeComics-j7z]

You mean you have to clean the printer head seven times to get it working .

[@almorgan69]

OMG! OMG! OMG! I had to do the printer head clean 6 times, a power clean once, then a print head alignment. It worked and I am super excited. I hadn't used my printer for the last three months since the passing of my daughter and father. I just did it while watching your video. I was very frustrated that my printer was not printing properly. Thank you so very much for this information. I really needed this.

[@TheKittens28]

I've tried all the same things you mentioned and I've used almost a whole bottle of ink doing all these cleans only for my prints to look worse. I'm about to toss the damn thing. 😭

[@yofavyodieh2699]

How did you do the power cleaning

[@Wisesthustler]

I’m sorry for your loss.

[@almorgan69]

@@TheKittens28 omg I’m so sorry. It worked for me. I don’t know much about the technical stuff. Are you using it for sublimation? If not reach out to epson.

[@almorgan69]

@@yofavyodieh2699 I followed the directions from the maintenance section on the printer.

[@alldemcats]

Hi! I came here because like most people, the printing had degraded poorly even though I knew I had ink in my tank. Before trying the distilled water tip for the print head, PLEASE try (if your printer has this option) going to the printing preferences of your printer. There is a maintenance tab with an option of power cleaning (only use this if you are sure you have a decent amount of ink in your printer). It gives two check box options, one to verify levels and the other about only running it again after 12 hours. This saved my butt so hard. Also fyi the power cleaning is also in the options of the physical printer as well. Hope this helps.

[@teresaschacherbauer4137]

Thank you for this video! I had lost all color except yellow to my Epson 4700. After watching your video, I cleaned my print nozzles 13 times and it worked! All my colors returned. So thank you very much for your help. 😊

[@ashleycoulter7843]

doing

[@ashleycoulter7843]

not sure why doing only posted... What that was supposed to say was.., mine is doing the same thing. only printing yellow and some grey.. ive cleaned my print heads like 6 times. but im going to keep cleaning them since it ended up working for you! Thanks!

[@teresaschacherbauer4137]

Good luck, I hope everything works out for you.

[@JustNow42]

About air in the lines. The cure is simply to tilt the printer say 60-80 degree in all directions one after the other. This will do it. Make sure that you have closed all containers. I have a 2750, it works very well.

[@JourneyofAn]

I don’t have a printer yet but that’s what came to mind while watching these videos 🤷🏾‍♀️

[@mountainpeakcloud8442]

Thanks so much! The damp paper towel method totally solved my clogged head. I was freaking out, cause I was watching some other video where a guy was injecting from cleaning solution through the head, and I got the cleaning kit, but I couldn't access the head like he could cause mine is a different model... anyway, I'm so glad this simple method worked.

[@wezziebaby20]

Whay did you do?

[@debbieferguson2359]

I just want to say "thank you" for posting this information. My Epson 2720 was not printing any color at all but after cleaning the print head several times and then using the damp paper towel on the print head and then re-cleaning the print heads I was able to get the color to print again.

[@emilymarbaker5396]

How long did you leave the damp paper towel?

[@alexandralafrance6493]

@Debbie Ferguson hi i have problem with my Epson 2720 how can i contact you please

[@alexandralafrance6493]

@@emilymarbaker5396 Hello i need some help to my printer give me wrong color

[@tammymatherne5933]

Thank you for this video. I have an epson2720. You can access the print head by removing the 4 screws on from of the printer. Then you can lift up the top of the printer and access the print head. I use an ink pen to prop up the top. Then you can clean your print head with easy access. Hope this tip helps.

[@veronicagarza4121]

Once you open it up how do you clean it? I’m having trouble with lines in my images nothing seems to work.

[@carmenbrannan259]

Thank you! I have a Epson ET3760, my cyan and yellow were both started not working at all, in the middle of a 20-page print job. I tried a couple of the nozzle checks and cleaning before watching your video, but after the video realized that I should keep doing them for more improved results. After 7 nozzle check and cleaning cycles, all of the colors were perfectly restored.

[@madelenaherrera1919]

Thank you so much for this video! I almost went out and bought a whole new printer 😢 I have a Eco Tank 2800 and the clean print head option fixed my issue! I did it about 3 times. Again, thank you! You saved me money!

[@apriljackson9698]

Thank you for being so thorough! SO glad you showed what it should look like with sub ink print test. At first my cyan and yellow weren't showing, but after a cleaning, both appeared. The yellow was still extremely light after 2 cleanings. But when I looked and saw yours was really light too so I tried printing something in word with blue letters highlighted with yellow and it printed exactly as sub ink should!!!! THANK YOU, God Bless :-)

[@RedStrykeTV]

Soaking it worked! My magenta was printing at all so I set the damp napkin under the print head for about 2 hours and it started printing magenta again. Thanks so much!

[@Cyn221]

Having the same problem with my Magenta. Where is the print head? What size damp napkin, a small piece?

[@Cyn221]

Sorry I hadn't finished the video when I asked the question. Now I know.

[@ptcaulfield]

You fixed my problem 1:18 into the video. Thought I had a printhead issue and turned out to be the print quality setting on my laptop. Bravo!

[@justinemurray1650]

After watching a million how to videos and then stumbling upon this one I finally got the issue fixed!! Thank you!

[@Afitz200]

Thanks for the helpful video! Just so you know, printing over WiFi should not cause any quality issues. Modern printers today (Anything within the last 5 years) are guaranteed to support buffering of pages and checksum validation. Basically this means that the printer will download the entire page before it even attempts to print it. This is why your printer can take longer to print high quality pictures, because it must download the entire document from your device, communicate with the device to validate that the document received is identical to the one sent, and then process the image in a way that the printer can equate to its physical actions. The printer will either receive a full file, or retry until it receives the full file, and print, or will never print. Those are the only two options with basically any modern SOHO network enabled printer.

[@elianax4]

I refilled the ink tanks on my epson using original epson ink and right after refilling it everything was coming out green. I ran the ink report and was indeed missing the magenta as well. I had done all you said on the video except printing a picture in only magenta. That was what did it for me! Thank you so much. I printed half a page of a block of magenta and everything was back to normal.

[@erikalopez2198]

I did all your steps and now it’s working like new, thank you so much 😊

[@Jeanna1516]

Oh my goodness thanks for your video - I have had my blue ink not working for months & have tried everything I could think of & was about to give up & trash my printer, but hate to do that as I have LOVED this printer & it prints beautifully when It works... the wet napkin suggestion & instructions WORKED & it is back to beautiful!!! THANK-YOU!!!

[@tammyhahn6124]

THIS... video is why I can now print my sublimations with the correct colors. ET 16600 was not printing yellow or cyan, it took15 times of cleaning the print heads! Thank you

[@elbajaimes2512]

Thank you so much!! I have epson 2760, followed all your steps, was about to give up (super frustrating with projects due!!) I decided to try your last resort tip and print a copy of magenta, cyan, & yellow layered to give me a copy of all 3 colors on 1 page (construction paper I had on hand), after the 2nd copy print it was showing some progress some spots, made 2 more copies and then decided to run the nozzle check/head cleaning must have done that at least 7-10x & finally all colors came back perfect!

[@memevidforyou2007]

It worked for epson expression 970, I did the alignment wrong, and the pictures were coming out blury with smudge marks, after doing the alignment correctly, it fixed the problems thank you

[@lindseywalters2527]

I wish this video had helped me. It seems thorough enough I can't imagine what else is causing my print problem. I have a 2720 also. It's only printing black and yellow. No magenta or cyan. I have refilled the ink and I'm using Epson's ink so I would think the ink quality wouldn't be an issue.

[@melissahedges9062]

Mine is doing the same thing and I’ve got a hoodie job due tomorrow.

[@keelseeyy100]

What ended up happening? My cyan and magenta are also not printing

[@carriebroughton3453]

@@keelseeyy100 also having this issue. Any advice?

[@carriebroughton3453]

@@melissahedges9062 Did you figure it out? Also having this problem

[@melissahedges9062]

@@carriebroughton3453 yes so I cleaned the heads about 5 times and then did a print alignment and it’s all good, I was talking with another crafter and she said to do this once a month and I should be fine.

[@Nickethb]

Thank you so much for this video. I was doing nozzle check, head cleaning, purge files and got nothing. Completely blank. I did the distill water and that helped. My ink started to flow and after a nozzle check followed by head cleaning all my colors came back. My printer is a l3250 😊

[@DiscraftJunkies]

If you Leave your printer on at all times the ink won’t dry. Inkjet printers run print head tests while the printer isn’t in use, to keep the print heads from drying up.

[@jrzgrl66]

Wish I knew this.... mine was off a few months.... was so, so busy with work and school. now I can't get it cleaned. 😢

[@justderreusdesigns4423]

This is not always true. I never cut mine off yet I’m here because my cyan isn’t printing at all

[@ashlienelson4402]

Mine is always on and my yellow isn't printing at all. Been working on it for 2 hours and tried many different things suggested online.

[@jamilasadat4110]

Thank you so much, the problem with my printer resolved. I was struggling for 3 hrs but through your video, I could overcome with problem.

[@ThomasHegland]

I was having this problem and found that you have to run multiple head cleanings to resolve the problem. It took 3 for me and then all of the colors came back. So don't be afraid to do a few. Good luck.

[@icaro007i]

I have an epson 2720 converted to sublimation. After converting it, it is only printing blank paper. I have done the cleaning process more than five times and still blank papers . Any way you can help me out with this. Will much appreciate it. Thank you

[@jamiesonnelson1679]

Did you ever figure it out? Having the same issue

[@brittanybarnett5953]

This was so helpful! I watched yesterday and I have already posted it on a FB group and sent it to my Dads wife as well. I can't thank you enough for this video!! Especially the hot tip on the wifi vs USB printing!! BIG DIFFERENCE!!

[@delilahc1775]

Why all my print are coming the wrong color can anyone help

[@NiCoLe-lb5qn]

@@delilahc1775 mine are very dull looking

[@lovemymules]

Thank you so much for the detailed information you give. I don't have my sublimation printer yet, but just the information on printers has been very informative.

[@hitmanhartman1394]

Since my 2720 is old I went ahead and power cleaned, however before I did that I updated my printer. After both of those my printer is back to working. At first it wouldn't print hardly at all, then after a few nozzle checks and head cleans it would print in black but refused to print in any color at all. I assumed it was clogged because my ink is full. Now it's working again, the purge file came out great as well.

[@user-of7kl9pe8p]

I just watch this video. I was having a perfect print but now my blue ink is coming out yellow. I’m getting ready to run all these maintenance checks and I’ll get back with you. Thanks for yr help

[@monicam9886]

Thank you for your video. I had to run the nozzle cleaning 3 seperate times before my issue was corrected. I also have the Epson ET-2720 and honestly this printer has given me nothing but issues. I print a decent amount of pictures for cricut project purposes, and it has been a piece of crap. Next time I will make a better investment.

[@szelop]

I agree! I’m not happy with this purchase!

[@delscoville]

Keep in mind when you run head cleaning, it discharges into the waste tank, and in those printers the waste tank is molded into the bottom of the case and cannot be replaced. You can head clean several times, but you can only power clean 2 times for the life of the printer, but it may be less if you done a regular power clean a bunch of times.

[@Alien2799]

Only 2 power cleans for the life of the printer? Seriously? What happens after the 2 cleans? Thank you

[@delscoville]

@@Alien2799 It will refuse to run after it thinks the waste tank is full. You can get a cleaning kit to flush out the tubes and nozzles, though. But you are better off trying to print like a whole page of the problem color until you start to see it printing, instead of running a power clean which will try to flush all nozzles into the waste tank. So you will only end up wasting some of one color instead of them all.

[@matthewjohnson3656]

@@delscoville You can unscrew the bottom and manually clean the sponges. Its pretty easy. Then I got a 3rd party key that reset the printer's page count so I could keep going.

[@lovy2thedovy930]

Hello. Is a reset necessary afterward or just something you did additionally?

[@matthewjohnson3656]

@@lovy2thedovy930 If the printer is telling you that you hit your print limit, you will need to find a third party reset key.

[@leeannemorris8659]

Thank you so much . The paper towel with distilled water worked on my ET-2720!! My magenta was not printing at all and now it is :)

[@mckendreeespta3024]

Holy Cow! Printing in high quality just fixed my issue! Thank you so much!!!!!!

[@CraftsByBobbyJo]

Thanks! I had to clean my print heads about 6 times before this was fixed for me. This was great info and I have the Epson 2760 with regular ink and the Epson 4700 with sublimation ink....both had this issue!

[@ashleybrown4450]

Thank you so much for the detailed steps! Crafty, I have the 2760 and I’m struggling with all the color in mine only the black works. None of the hacks are working so I might do the power clean 🥺 any advice?? 🤗

[@user-nq8mr5tv9e]

There are two screws that allow you to open the printer so you can access the inside easier. I’ve tried to resurrect a printer just like yours, but even trying to clean the print heads doesn’t get my cyan back. 😢. I couldn’t find your description of good vs bad inks anywhere.

[@iriscisneros3088]

My printer was printing gray for me, and your method worked for me THANK YOU!!!!

[@lynnesunshine]

Thank you! The purge print worked on colours and the damp paper towel did the trick on my black…ET 2760

[@melissapena4667]

Qustion - what if I did all this and they printer is tell me I have lots of ink but nothing is coming out. I've only had my printer for almost a year (ET-2720) and I use sublimation ink it. It's worked fine in the past but this time it's printing nothing or just little markers. What else can I do?

[@AinesOddities]

Ohhhh mannnn! Thank youuuu!!! I have been working on my laptop and printer for 12hrs over 2 days trying to figure this out. ♥️♥️♥️

[@ajakaui]

Mahalo! Ink is not available here on island. Replacing my printer would be 2-5 day shipping at best. You saved my project!

[@shannonclayton3324]

Thank you!!! I had 1 missing segment after MANY cleanings! Running an alignment fixed it!

[@ruthmoffatt1128]

THANK YOU so much for sharing. I was having the same problem and followed your steps and it is working perfectly. Also, I didn’t think about the fact that I need to print at least once a day to prevent the printer heads from clogging. I also think my ink is not the best so I’m interested in trying the one that you recommended. I subscribed To your Chanel and again thank you.

[@sandrabautista3729]

i just bought an epson 2720 and converted it to sublimation and i want to know if when not in use can i turn it off or do i need to leave it on at all times so the ink doesnt dry up . ive seen mixed answers on this

[@shariblatt-nelson514]

Great help…I am getting nothing when I print…using Printers Jack sublimation…I’m trying everything…I made a cup a couple weeks ago and today I’m just stuck…

[@soniajones7928]

after hours of suffering and almost throwing this one out the weekend. this helps . thanks so much!!

[@angelakatzenstein3715]

WOW!! Thanks alot! I have an Epson ET-2720. This process worked great had to run the process about 15 times back to work !!!! thank you so much for this video

[@catherinemarin-rios4536]

My Epson 4700 colors are off. I did a nozzle check and is showing only the black. I’m using Cosmos ink.

[@ogjennyb]

WOW THANK YOU SO MUCH THIS VIDEO HELPED A LOT!!! I was struggling for a while!! and called tech support and it didn't help. I have the EPSON ET 2803 and it worked just doing the printhead alignment setting!! Thanks again my friend!

[@TerrapinCreations666]

I have the ET-2760 and I always have problems getting sublimation paper to print at all. It keeps telling me there's no paper, or a paper jam. It might take me 50 or so tries before it successfully prints. I've searched for hours and can't find a solution for this problem. It prints regular paper with no problems at all.

[@kg4803]

my printer is printing blank, I've done over 10 nozzle checks, Print head cleaning and even a power cleaning and nothing. I remember that it said that it would decrease the ink during the power cleaning but it hasnt happened. its a brand new printer also

[@sophiastewart3043]

I purchased the 15000 from someone who wasn’t truthful. It was converted to sublimation which wasn’t the issue. The issue was she used some cheap sublimation ink so it took me a while to get it up and running. Because the ink was cheap the images never transferred for sublimation but everything else printed just fine. I decided to “remove” the cheap ink and refill the tanks with a better quality ink. Now the ink doesn’t transfer to the paper so it’s just printing white paper or really faint lines. I called a printer technician and he said the print head might need to be replaced. Because the repair cost (in my head) was more than purchasing a new printer, I bought a 7840. I watched the videos and converted it but it has yet to print anything on the paper. It is doing the exact same thing: printing on white paper or really faint lines.

[@krystalgomez9001]

Thank you for this! I hadn't thought about it printing over WI-FI.

[@SherryBrubakerPollock]

In the middle of printing two 5x7 "First Aid Kit" signs, my magenta quit working. Then, after running the nozzle check and print head cleaning, I lost yellow and cyan too. I can't tell you how grateful I am for your video because I thought I'd broken something. I resorted to the Power Cleaning when 2 more head cleanings did no good, but I immediately got all of my colors back and was able to print those signs tonight. Happy dance!! Now, if you can tell me how to connect the printer to our laptop via USB, you'll make my husband's day too! lol He despises this printer because it won't work unless both the Mifi and laptop are on, even if he's trying to print from his phone. (My fault for picking this ET-2720, but I had grown tired of replacing half-used cartridges.)

[@dazzleddollz]

Thank you so much! You’re a lifesaver. My printer started to print the wrong color and I have over 30 orders to get out

[@mrsvega919]

Thank you! Between this video and a couple of others, I was able to get my converted Epson working again!

[@RickieHulsey]

Did all that you suggested but still pink hue to prints. Note printing thru wifi, and high quality paper. Darn. Thank you.

[@maksteezy]

Bro I was getting so pissed I was printing fine, j turned my et4800 to a sublimation printer. Then it was just printing blanks. Went to maintenance did nozzle check. Then head cleaning. Did it twice started to print again. First time was missing segments. Thanks man.i was gonna send this printer back to Walmart lol.

[@vbg1513]

Having the same problem. Using Epsom OEM ink. Deep cleaned print heads three Xs. Printed solid page of cyan 10 Xs. Paper comes out white. Still will not print in cyan. I'm awating a print head cleaning kit from Amazon and will try cleaning print head tomorrow. Printer is 13 months old.

[@CP-kb1du]

Thank you very much my epson ET-2760 has not been printing Red ...Head .cleaning several times Printing all Colors Now ..respect

[@aedanhannabeshoi]

OEM magenta ink ET-2760, just decided to clog one day in between steady use of the printer. Currently, troubleshooting but I cannot think of a reason for the clog unless my printer decided to evolve platelets all of a sudden

[@foxysworld6999]

I am using hippo ink. I use my printer just about every day. There might be a day I don’t use it in a week. It has never been stopped up! I have had it almost 2 years!

[@daniellestuard3967]

Oh thanks so much for this video, I was worried about wether or not, I was going to have problems with my ET-2720, I set it up and used it a couple of times and then was discouraged because I was doing the sublimation wrong, but I just did a few of the things you recommended and I did fix a couple of things and but one thing I didn’t have to worry about was the ink, no clogs what so ever!! I am using Printers Jack ink. It must be pretty good, because if I had to guess, I have printed anything since February and it’s almost June!!

[@stellaharrison9390]

@12:30 was helpful for me. Suggestion if you have a clog I had to clean/flush heads twice before I was able to see my cyan start flowing again.

[@kmichae]

Thank you, I am having trouble with the black, I've done everything you said multiple times, when do i give up and trash the printer? It's only a few months old with very little printing. but i haven't printed for a couple months. Any idea when to call it a loss or how many times i should run these diagnostic/cleanings? i added the last of my black ink into the tank and don't want to buy more if this isn't going to get fixed. Appreciate any suggestions

[@sassyjones9747]

I'm having the same issues with my black only. Did you end up trashing it? I have way too many lines...and the black has never printed completely

[@musicm4948]

I had to get rid of mine and get another one . It’s so annoying I tried everything

[@gabbiezazueta]

YAY!!!! oh my goodness THANK YOU!!! you saved me from throwing my printer across the room!! I have the ET-2720 and this worked perfectly! I did have to do it 5 times but after that my magenta is on point!

[@dat078912reppa]

Why is my printer not printing the entire image , it’s brand new. It took forever for me to get the dtf film to feed through . 2 different brands of paper & the printer seems to only print 1 inch of the image

[@BBgunX22]

I just opened my Epson printer today and I'm using Hippoo ink. I've printed 5 test pages and everytime my yellow had missing segments. Sometimes my magenta was perfect and sometimes it had segments but yellow was always an issue. I'm not sure what to do at this point as I've done the alignment. I haven't done a deep clean since it's a brand new printer but I'm at a loss. Any suggestions?

[@LouRao]

Thank you for this video -it’s a life savings! Question, When doing a “Power Clean” it will used a lot of black ink. Where does the ink go? The printer is flushing out the ink but have no idea where it is flushing to? Thank you.

[@gerrywolfe2549]

I tried nozzle checks & head cleaning & still the same problem. When I did nozzle check the magenta didn’t show up. I’ve also printed at least a dozen full page of magenta color, but still nothing. I tried the paper towel suggestion, still no magenta. I’ve hesitated doing the power clean, since it uses a lot of ink & fill up the tank. I open the top & checked the print heads & it looks like there is very little ink getting there compared to the others.

[@marisolgranados4278]

I have a brand new epson et 15000 that I just converted and I noticed when I print a larger image from the tray my print come out with so much ink that it looks like the printer is scratching the ink as it prints but when I print regular 8.5x 11 my prints come out normal . What do you think is wrong when I print using the 13x19 ?

[@Linda-ou5lu]

So, I have the horizontal lines that are equal, like you spoke about at :43. I'm not printing by WiFi or draft mode. Any suggestions? I've done all the cleaning, took the air out of the lines and aligned the print heads. Nothing is working. Any help would be appreciated!

[@akandindaandrew8795]

Great tutorial. I have an Epson ET2720. Why does red color fade away after printing.

[@Kdm_electriceye]

All of my rectangles are separated when I do the horizontal alignment…there is no option to choose I’m not sure what to do after that

[@GigiPicasso]

✨insteadof wasting ink doing the cleanings and filling your tank in back... Do purge files. Run putge files in each color. Cyan is 00ffff yellow is ffff00 magenta is ff00ff and black is 0000 . Enter these codes in the rgb color scale. Paint a rectangle of each and do them separately when one color isnt showing up

[@jessicacummins8032]

I have a question about printing..mine is doing this weird thing where it prints great and then almost glitches and doesn’t print anything but my colors in bars and crazy lines

[@loving_aki]

Hi! I know this series started over a year ago, but I was wondering if you can make a video of t-shirt printing with sublimation dye and ecotank printer. I love your videos, they're very informative and helpful. Also, can we convert the Epson Ecotank 2400 to a sublimation printer?

[@tamikanoel7563]

hi, I have a Epson L3110 for sublimation that is printing the correct color blue and green however is transferring yellow instead please help

[@destinypedigo]

So the horizontal print head alignment every box shows them separated I’m not sure what to do it made it worse

[@jackiepcan7]

I have epson 15000 I converted to eco solvent ink (eco rush) and it’s worked fine it sat for 4 weeks then all of a sudden started printing blanks and I’ve tried head cleaning seven Power head cleaning still not printing

[@CharlyPacheco]

I am having trouble at the beginning printing is black ink and folded printing at the beginning of the sublimation paper

[@rachelbrown7739]

The lines I am dealing with isn’t the ink itself…it’s almost like as it is printing, it’s skipping. It almost look like it’s perforated but really tiny

[@lavitabenian913]

Hi.. so i’ve done everything and my printer is still not printing color. It’s blank. And also paper jams is another issue i have with the printer

[@Gashygash66]

Same here!!

[@pandoraeyre84]

@@Gashygash66 same here! I can't even get a test print

[@fredricgrethel1717]

Me either. Expensive boat anchor. Piece of junk. I did the head cleaning and still barely printing colors no black

[@lavitabenian913]

Really is a piece of junk!! Waste of money

[@7707377016]

Question for anyone. I have a epson et 15000 use cosmo ink with asub or crafting bestie. The printer is printing good but lately it’s been having these pizza lines on the paper. Not sure why if I been using the same thing this whole time. Does anyone know what to do? I tried everything

[@bettynaranjo6751]

I’ve had mine for about a year, my last print was week of 12/4/23 now the pages come out blank.

[@mz_gsxr305]

I’m having the same problem

[@mariysuspuntadas]

Thank you for your video unfortunately didn't fix my problem I did all this but the page came blank , the second page Had a very faint colors, and my printer is Epson ecotank1500 I have a warning sign that my maintenance cartridge is almost full, I have a new one waiting to my printer tell me is time for a change, but I don't know if that is the problem. I don't know if you can recommend something 🙏 please

[@2574vickie]

I am having the same issues as you are describing. i am aboout to try your instructions. i will let you know if it is successful ty for the video..

[@janeemilybowman839]

Hi!! Mine is not properly feeding the paper of my epson 2803 sublimation printer. It will get a little crooked or most the time the corners are being folded up when it tries to feed through, what should I do??

[@lotashatollette72]

I'm having this issue. I tried to run a print head cleaning and the feature say " invalid". Any maintenance feature I push, it say " invalid".

[@ninadhanda6935]

I have an Epson 2803 Eco tank sublimation printer. I drained the ink so I could replace with regular ink, which I have done . I have ran the maintenance on all it is not printing at all, just blank. What can I do...

[@mikaels6009]

I was printing some tshirts with my sublimation ink on sublimation paper. The first 6 or 7 papers came out cool, good color , no issue. But, then all of a sudden, the picture cane out a faded red. At least 3 more came out this faded red on the sublimation paper. Not sure what happened, could anyone suggest anything?

[@maryannmiller1774]

Thank you for the video! I'm about to throw mine out the window. I have cleaned the print heads many times, the ink is full and I can barely even see the printing of the diagnostic image... It worked fine and then I didn't use it for a couple of months... Any ideas? Epson 3760... I have orders to fill !!!

[@myrtabyrum281]

I get NO printing at all now. I have ink in printer. Gone through the maintenance process a couple of times. Don't know what to do.

[@nicolaturner6735]

Done everything you’ve said and it great, the print photos are too dark, how do I fix this please I have a Epson 2027 Nicky 😀

[@justderreusdesigns4423]

You may need to do some tweaking in the color management setting of the printer

[@valeriehofmann2615]

Did you figure it out? What ink are you using? No matter what I do the colors are to dark

[@perlaojeda1294]

Hello I don’t know if you know but my printer prints like doble in one sheet the same image over lapping and blurry I was wondering how can I fix that

[@wezziebaby20]

My cyan isnt working no matter what i do. Im the process of the damp paper towel. I also used a syringe to suction the tube and ink case itself. What should i do?

[@reneemarshall1659]

How do you fix the problem of the computer printing lines thru the black colour in an image instead of block colour? Its happening all the time and I cannot work out how to fix it! Please help a girl out!!

[@RonGay58]

My 4 month old Epson ET-2400 will not feed paper to the printer. sometimes it starts pulling in on the left side, sometimes nothing. either way I get a jam notice. Any Ideas?