Hive V3 Thermostat Installation In 10 Mins - Combi Boiler Wiring | Vaillant EcoTec Pro

These resources will teach you how to diagnose and fix any boiler: signup.advancedboilertraining...
This is a walkthrough on how to wire a Hive V3 Thermostat on a Vaillant EcoTec Pro.
Tools used in this video:
Nws multi cutters: amzn.to/3XosG6n
Knipex ergostrip: amzn.to/3jLl4NP
Voltage tester screwdriver: amzn.to/3HXHeEF

[@youknow2014]

Great video, could you please name all the equipments you used like the cutters and what not? Thanks man

[@advancedboilertraining]

Nws multi cutters Knipex ergostrip Voltage tester screwdriver

[@jamesdavidge1295]

Absolute great video. Many thanks made a DIY’er very happy! 😊

[@kibbsosafo4508]

Superb video.... Thinking of replacing a MT10 with same which should be easy but someone mentioned Hive.... Looks good but not less energy usage with batteries - i wasn't sure if that is advantage of Hive i guess not.. versatility vs. cost. Might give it a go though...some more research..like program etc. On/off..

[@chrisrobbo9259]

Hands down the absolute best video I’ve found to wire a Hive to a Vaillant, I rarely leave comments for anything but credit where it’s due, thank you.

[@cliftonpoynter5605]

Fitted my first hive with combi a week ago, no problems except app couldn't find receiver etc, just hade blue dash bouncing left to right on phone searching. Gave up in the end and rang Hive who were very helpful. She already had my customer details her end (wow, spooky) and just said cone out of the app completely and then back in again and bingo! Basically turn off then back on 😂 Don't know whether she done anything her end but all good.

[@mattlemoine2933]

Absolutely fantastic detail in this video, I would never have approached this but wired my replacement Hive up over the weekend after changing to a combi and all working successfully.

[@mightyflagelot9816]

Simple and straight to the point... very well done sir!

[@thomassale3021]

By far one of the best tutorial I've used, super informative

[@giancoppola1]

This video was so informative and helpful, can't thank you enough for making this easy enough to do yourself. In case it helps anyone else, I accidentally skipped the step to remove the link between RT and 24V on the left, and my heating was on all the time despite the controls being set to off, following the instructions properly and removing that wire fixed the issue. Thanks again!

[@gcooke9443]

Brilliant, recently moved house and took my Hive with me from my old home. The engineer who serviced my boiler wanted me to buy a nest and wouldn't fit the Hive, this video explained everything and its now installed and working. Thankyou.

[@MrJonpac]

You videos are fantastic. I'm 40 and just booked up a Gas course to retrain. You explain things so well and make it look easy. Keep up the good work my friend

[@GasTraining]

How’s it going? Just finished my 4 months and starting portfolio now. Hope you’re getting on okay

[@ghlisted]

Great tutorial. As a newly qualified gas engineer, your videos are so informative and easy to follow.

[@advancedboilertraining]

Thank you!!

[@nancysmith1500]

This guy is amazing, so clear and consise. It's easily the best instruction video I've seen. Thank you!

[@theonlybuzz1969]

Thank you very much, really easy to follow tutorial and your suggestions to save time are spot on! Many thanks!

[@alicestanley3044]

Really helpful, thank you so much. I've just successfully replaced an old honeywell thermostat and receiver with a new Hive system thanks to your video 🙂

[@keithflynn5651]

Really good, well laid out and explained video. I'd recommend anyone to watch it all the way through before attempting and then again as you're doing it. 10/10

[@ryanjones2663]

I don't usually comment on videos but this was great. Concise and informative. Well done.

[@user-fw5rd5ts4w]

Great simple video, clear concise instructions, great job!

[@bannaskin]

Brilliant video easy to follow. I have ideal logic 30 boiler slightly different wiring method but I got there. I’m no expert just a man doing diy.

[@kamran3159]

I have just completd installing Hive following this instructions and is all done took me about 1 hour , as my boiler is in the loft and had to get a cable from the loft into the living room where the received and Hub and thermostat is , amazing

[@arniejenkins]

Top video, I struggled to get mine to connect. Hive were less than useless, wasted hours trying to pair up components. After watching this video. Sorted in ten minutes.

[@Stokey_73]

Hands down the best reference video. I encourage everyone to view this video before installing hive thermostat, hub and receiver. Love the cutters can’t decide on left handed or right handed versions 🤔

[@jasonwright5856]

Really useful video, every step very clear and easy to follow. Thanks!

[@JaskeeratTV]

Good video, the bit where you have to wait for the hub to update was very helpful as the app won’t connect with the hub otherwise, thank you.

[@pj8645]

This is hands down the most efficient video. Flawless!

[@maxswaby]

Perfectly explained video, with very good tips. Thank you. 👍🏻

[@TheMikeAngelus]

Thank you! My setup is going to be even easier, because I already have an external control unit routed out of my boiler. My boiler servicing company wanted to charge me £174 for this installation. Absolutely mental.

[@vibetelecom2663]

Amazing Video, very clear and precise, thank you for taking the time to share your knowledge.

[@darrensjourney1979]

Thank for the video, you were my step by step guide to installing my thermostat, very much appreciated 😅

[@chrislee5442]

Great video, really easy to understand. Thanks.

[@24-7ttplumbingheating4]

I'm a plumber just started working on boliers 2 years I really appreciate these videos I'm learning so much . Everything you explain is very clear . Keep up the good work I will continue to watch these videos. 😎

[@advancedboilertraining]

Glad to hear you’re enjoying the content!💪

[@CommercialGasEngineerVideos]

Totally agree, good shout

[@cr4172]

I already have a cable connected

[@sen10el2007]

Excellent guide video, thanks loads.

[@steveswindon7506]

Top video I’ve just bought a hive and have the same boiler very easy to do know a little electrics and this was very helpful all up and running and all good thanks for the video

[@anthonya3666]

Big thank you for this video! It worked an absolute dream.

[@darrenfurnell90]

Great video man. Really easy to follow. Best step by step vid on how best to install these by far!

[@jamieroberts3682]

Great video off to buy the device and ill watch this again during install. Top Man!

[@jamieroberts3682]

I bought one and fitted for my parents for Xmas. £109 from Screwfix

[@jesslouise181090]

I never leave comments but this is the best video I found (and I watched a lot before this one!!) Thank you!

[@timshallcross620]

Excellent video, very clear. Thanks very much

[@deeshephard1120]

Wicked video very thorough 👏🏾

[@richardhodgson7443]

Excellent demo, thanks 🙏

[@advancedboilertraining]

Thank you Richard! Appreciate the kind words👊

[@tommycahill7496]

Amazing video keep up the good work thanks

[@neilbissett1240]

What a great video thanks for sharing 👏👏😎

[@kamran3159]

Must say , great video and perfect instructions .

[@douglaughton7626]

Great video, fitted 3 in one day, I didn’t need advice on the wiring but not good with hubs and Wi-Fi issues. If it works straight away, it’s great. The logic steps and how long to leave it updating is worth saving this video. Nice job 👍

[@AbdulRehman-zv8bw]

Best tutorial video, highly appreciated. Thanks 🙏

[@stevesprepairs550]

Great video! Well done and thank you! Saved me a load of time! 👍

[@stuarthunt9999]

Absolutely amazing instructions, thank you, sir! I'm feeling well and truly proud of myself for doing a bit of an electrical project, without blowing the house up 😂 🎉

[@shift_down]

The risk is it can always blow up later due to shoddy diy. Electrical work, esp on a boiler should never be done really.

[@stuarthunt9999]

@@shift_down are you saying these instructions give shoddy results??

[@shift_down]

@@stuarthunt9999 No but its quite easy instructions to be applied incorrectly. Not saying the instructions is bad or you've done it incorrectly but theres a risk that if you do something wrong, you wont know until theres consequences later on. Most DIY stuff is ok but things like messing with the electricals in a boiler is too risky tbh.

[@swift_learn]

Excellent video well explained great instructions. Thanks 👍

[@ivanondov8826]

Excellent video. You are TOP MAN 👍🙌

[@advancedboilertraining]

Thank you!

[@karldale9217]

Brilliant Video, followed this exactly and installed my Hive thermostat easy, thankyou 🙏🙏

[@sikesider]

Wow, a perfect explanatory video. Thank you.

[@matthewgibson8010]

Great video thanks. This has fixed my problem

[@advancedboilertraining]

Great to hear!

[@chuckster007a]

Great video and looks quite easy to install, someone was quoting me GBP80 just to install it LOL

[@paulfinglas1305]

Wow how simple was that to follow well done mate thank you 👍

[@darrencutler3346]

Good that you put the brown sleeve on the white conductor but you should have put blue on the black conductor as well to indicate that it is a neatral.

[@Paulmckennaefc1989]

Excellent video!

[@jaysargent8411]

Great vid! Thanks for sharing.

[@ar.69]

Top video .Excellently taught..bless you Thank you🙏

[@user-pw1ur3ux7o]

Great video thanks for precise instructions was a breeze to fit 😊😊

[@jonesboy201]

Brilliantly explained 👏👏

[@Stuey1221]

Took me a bit of time to figure out a few parts but that was spot on

[@paullanyon3477]

You should teach full time mate, so articulate and a great video.

[@advancedboilertraining]

Thank you!

[@barrydoherty636]

Great video, well done.

[@narendrachauhan3691]

Really explain step by step no one explain like great video thanks

[@train4905]

Brilliant sir,very helpfull indeed thankyou Most kindly

[@advancedboilertraining]

💪💪

[@kevinbroadway5848]

Perfect Video gives me every confidence to replace my honeywell reciever and place a hive,

[@waheedali1674]

Great info video ❤

[@tonyhaz6664]

Great tutorial ty. I have a valiant boiler and a old control panel next to it, woukd I need to go into the boiler still?

[@KamranKhan-ro9gg]

excellent video thank you

[@mrthomas6542]

This is an excellent video welll done!!!! Communicated very clearly and showed every aspect required!! Excellent!!!! Thank you bro!!!❤❤

[@jameswelsh2540]

Thanks for this Video you are a lifesaver

[@mcearth3592]

We just had a Hive put in this week, and took the guy over 2hrs !! Why it took so long ? I think most of the time wasted on trying to understand the software setup and I can tell the guy is clueless with technology. Your video made it look so simple and as a tech person I can see you have covered all the steps in details yet the process easy to follow, but I would never try to re-wire anything in the boiler, guess this is why we have to pay big bucks for trained engineers.

[@andycampbell-stewart2327]

Top video you have a great command of the subject. Master Tutor and not a plumber.

[@jassinghIG45]

You’re very well articulated and your step-by-step instructions are very clear and detailed for any engineer whether novice or experienced. In this particular case with the Hive instructions filled with ambiguity, you’ve demonstrated the installation setup perfectly, Well done. No disrespect with my next comment; I just don’t understand why engineers choose the Hive, especially on the Vaillant as there is no real modulation on the Hive and doesn’t have OT capabilities. Nor does the Vaillant for that matter. The Hive is just a glorified on/off control. Vaillant’s own controls via the e-Bus connection provide modulation or the new Tado with its various Bus controls can be connected as a third party control capable of modulating the Vaillant boiler. I’m just curious with the thought process, this is in no way undermining or challenging you or this video, only to engage in conversation to better ourselves and one another through learning and sharing.

[@advancedboilertraining]

Thank you for your comment Jas, I really appreciate it! Yeah I get what you’re saying. This video was just to show how to set up the hive hub and app as I had quite a few requests. The only time I fit Hive thermostats is when the customer has already bought it or insists they want it. But recently I think Screwfix had them on sale so a lot of people were going crazy for them!

[@jassinghIG45]

@@advancedboilertraining think it will work really well with weather comp as an on/off influencer on boilers that will accept it. I’ve wired and converted a Y-plan to PDHW on the Hive (that the customer bought lol) and that works well as some may prefer the look and cost of the Hive over the Nest or Tado equivalent. Great vids, with in-depth explanations on how to repair etc. Appreciate your work and work ethic.

[@jamieroberts3682]

@@advancedboilertraining they are £109 at the minute, my replacement Honeywell (overly complicated) thermostat was more expensive. So it's no suprise people go for the Hive. Household name and easy to use.

[@rayking6636]

Well done mate excellent 👌

[@jogabhambra6606]

Very detailed video.

[@slimski]

Super helpful Thanks so much

[@train4905]

Absolutely awsome help sir,,thanku loads,,godbless you sir😊

[@mindfuc]

Awesome video.

[@paulblueoasis5608]

Brilliant

[@CherieSaterlay-x6m]

Great help… can you let me know how to install if there is already a existing Honeywell thermostat

[@fanoscharalambous2098]

Great video 👍 👌

[@aj7303]

Great video.

[@RajuAhmed-ll6ed]

Absolutely spot on bro! Thx! One question plse… if you have two zones e.g ground floor and first floor. How would you connect give, would you need second hub and receiver? Hope to hear from thank you!

[@MrAps-jh2qb]

Amazing ❤

[@zagros56]

Excellent thanks

[@tethadam6678]

Excellent

[@johnomi]

Thank you!

[@aritshah2220]

Thanks for the video, how do you wire this if you have zoned underfloor heating?

[@1066sax]

Best video thanks😅

[@enayatullahnazari996]

Good morning mate,I really like the Way you help the new engineers, can you explain for the same thermostat but dual channel wiring please.

[@shafikladha3941]

I just replaced my existing Hive with the new 3 piece kit but after following your instructions I found I couldn't connect the new hub to British Gas servers so its worth knowing that you have to get in touch with the Hive helpline so they will remove the old Hive off their servers and install the new hub when they will need Id number from the bottom of the new hub.

[@advancedboilertraining]

Thanks for the comment! Hopefully this might help someone else in a similar situation

[@Jamie-mt7nc]

What was the reason for the link connection between live and terminal one?

[@attiqahmed3400]

Also wondering why

[@skumpuntele8941]

What do I do with existing vaillant wireless thermostat that I got with the boiler? Do I need to disconnect it from the board somehow or just take the batteries out of it?

[@NickG24]

Thanks, this is a really clear video. I am thinking of installing a hive on our combi boiler, it has a dial thermostat on the wall … is there any reason you can’t just leave the existing boiler control panel in permanent ‘on’ mode and replace the wall thermostat with the hive reciever? Surely it’s just switching on or off according to the thermostat and the setting in the app? Or am I thinking too simplistically? Thanks again.

[@daljitkhangura]

Hi, I accidentally bought the hive heating and hot water but only needed for heating on Vaillant ecosystem 837 similar to one you working on. Is the wiring process same for thermostat as the wiring diagram looks different. Can you please help? Thanks

[@pp2devane]

If I get a smart thermostat for my Valiant EcoTec Pro 24, how easy would it be to also remove the timeswitch and replace with a blank piece like you've got here? I live in a small studio flat so the loud ticking the TimeSwitch makes drives me nuts!

[@twat69]

Cheers dude

[@PaulWhittaker]

hi there great video could you show how to do a multi zone install thanks

[@HughzieTube]

Do these things have a fairly decent range? Our internet hub is in the sitting room, the thermostat is in the hall, and the boiler is in the garage (Through an external thickness brick wall). Would it still connect split up like that or would you be better up wiring the receiver into the hall?

[@JTop79]

thanks for the video. One question, is there a thermostat / remote device that allows to control flow temperatures of the hot water/heating with an app?

[@tuggers1000]

great video mate. would this be same install on a Glow Worm Ultimate C?

[@ahstit]

Absolutely brilliant step by step tutorial which actually made me buy the V3 with Hub. I have the same boiler and have followed exact instructions however when I set my thermostat temp the receiver light is fixed green but the boiler isn’t switching on. Can you help me here please?

[@jayallum2423]

Did you find a fix for this?