Really appreciate straight forward videos and information like this.
@Scott679 ай бұрын
Thank you.
@juhlooo3 ай бұрын
thank you for saving us money on the rail and a straight forward tutorial. Appreciate you!
@Scott673 ай бұрын
Happy to help.
@Icy_Pumpkin23 күн бұрын
How is the rail? Does it still work well?
@BradBorkowski10 ай бұрын
This video was perfect for showing everything in the process. Thank you so much
@Scott6710 ай бұрын
Happy to help.
@Gooobzilla2 жыл бұрын
Thanks! Just got my MP5 today and ordered the rail. Only $12.49 right now 👍
@Scott672 жыл бұрын
You welcome.
@albay62 жыл бұрын
Whats the rail.info pls???
@Scott672 жыл бұрын
@@albay6 www.amazon.com/dp/B07PLYKP2N
@toolman672 жыл бұрын
I had the original Walther release of the A5, but wanted the newer stuff so I sold it and bought this and the pistol. Only downside noted is that the trigger group on the new stuff is plastic, versus the metal on the older models.
@Scott672 жыл бұрын
@@toolman67 yea got to keep that price down.
@heracross3669 ай бұрын
aside from mic quality perfect video, straight to the point and good information. keep it up man
@Scott679 ай бұрын
Thank you and thanks for the feedback.
@redzone10192 жыл бұрын
Thanks for the tip on the rail for the Hk MP5 22 rifle. Saved me a lot of money. (Smile)
@Scott672 жыл бұрын
Glad I could help.
@ucanon26622 жыл бұрын
Thank you for posting a video where you have a skelton riser to also use your iron sights!!!! Most of the other videos fail to do that!
@Scott672 жыл бұрын
Glad it was helpful!
@JerseyStyle7 Жыл бұрын
Very cool👍🏽🇺🇸just ordered this mp5 last nite 👍🏽
@Scott67 Жыл бұрын
Nice!!
@KamranRulez2020 Жыл бұрын
thanks! I watched this video to find a way to put a rail on my 1:1 model gel blaster
@Scott67 Жыл бұрын
Excellent!
@jonnygun50552 жыл бұрын
Good video. I just order my rail thanks for the knowledge
@Scott672 жыл бұрын
Thank you.
@kaleltesla2 жыл бұрын
Very helpful video👍🏽 do you know if there’s rails that go on top and on the side for the exact model?
@Scott672 жыл бұрын
Yes.
@EmazingTryhard2 жыл бұрын
Thanks for the video, I ordered your exact set up for my mp5 and for some reason the red dot sight has a lot of slop even after tightening both screws down. Did you experience any slop issues with your sight? Rail mount feels solid, it’s just the sight for me
@Scott672 жыл бұрын
Thanks and sorry to hear. No slop in mine. Not sure why yours does. My advice is reposition the red dot and try again if you have not already.
@EmazingTryhard2 жыл бұрын
@@Scott67 thanks for the reply, I did reposition and still no luck. I’m probably going to try and use my aim point from my AR to try to use some process of elimination to see if the rail or the sight is the issue. I have a feeling that the rail might be under sized
@zaidflowers18282 жыл бұрын
@@EmazingTryhard did you fix the problem sir
@_.king9._1022 жыл бұрын
I’ve noticed something weird with the tabs on my Mp5sd. It may be because it’s chambered i. 9mm but it shouldn’t make a difference. So far I’ve only had luck with the factory issued H&K claw mount that was made for the mp5ad and others with the same recoil stop block (the two little tabs on the top) all other claw mounts wether it be a 150$ mount or a 20$ mount either don’t fit being too narrow or the one for the 90 series is too narrow to clip over the top. The factory one went right on with no issues and doesn’t have any play at all. They don’t cost much typically about 50$ you just have to track one down and wait a few months for it to come in from either Germany or Turkey.
@Scott672 жыл бұрын
@@_.king9._102 Thanks for the information.
@8u2b2 жыл бұрын
Got the same setup. Ordered a second rail when I add the pistol version.
@Scott672 жыл бұрын
Nice. Pistol version looks bada$$ as well.
@samforshee23902 жыл бұрын
Thanks for the link. I got a NC Starr rail for mp5 but it would not fit. Also I dig your art in the background. I also enjoy painting and guns
@Scott672 жыл бұрын
You welcome and thanks.
@_.king9._1022 жыл бұрын
Yeah the ncstar one isn’t labeled well at all and normally sold for the wrong things. It says it can work on a mp5 and it can work on a 90 series for the msg90. Which is two totally different rifles. Ones a sub compact semi auto and ones a carbine style sporting rifle. I was sold the same rail and don’t understand why it says mp5 on the box if it can’t fit a mp5 upper.
@SlowSubie12 ай бұрын
I know the video is old so idk if you’ll respond, but with this rail do you by chance know if the sig sauer Romeo would fit on it?
@Scott672 ай бұрын
It should work.
@nacs11 ай бұрын
Perfect combo, thanks!
@Scott6711 ай бұрын
You're welcome.
@tobymorvant817511 ай бұрын
Thanks just bought these. Do you have a link for the stock?
@Scott6711 ай бұрын
I've seen some on HKparts.net Stuff is pricey.
@fatchicken518 Жыл бұрын
Thank you good sir, love the artwork in the back
@Scott67 Жыл бұрын
Thank you.
@McpocRouwhorst4 ай бұрын
Good stuff man!
@Scott674 ай бұрын
Appreciate it!
@ThENoOB235 Жыл бұрын
Have you been shooting with this mount for a while? Has it caused any damage to your Mp5? I worry about not grabbing the official piece and it scraping my sides up
@Scott67 Жыл бұрын
If there's any damage, it's where the claw of the rail grabs the gun but I can't physically see any damage.
@samplays9253 Жыл бұрын
Hi there, are those parts you bought off Amazon still holding up? Was thinking about buying the genuine HK parts, but they’re very expensive. Thanks.
@Scott67 Жыл бұрын
They are but I don't shoot with this one very much. A handful since I made this video. The rail alone you can't beat for the price and if it don't hold up you didn't break the bank.
@samplays9253 Жыл бұрын
Thank you for the reply.
@samplays925311 ай бұрын
@@Scott67 Have any trouble with the rail? Got mine and the bolt holes didn’t line up where I could thread in all the bolts. Ordered a replacement rail.
@Scott6711 ай бұрын
@@samplays9253 No troubles here.
@anthonyk8212 жыл бұрын
were you ever able to get the handguard off? i want to attach a laser but all im doing is chipping away at the finish
@Scott672 жыл бұрын
From what I researched you need to take off the fake suppressor then you need to take off the screws above the barrel not beside it and slide it off.
@casperlokz83482 жыл бұрын
Just bought mine thanks
@Scott672 жыл бұрын
Cool
@krosslong-l1t2 ай бұрын
is it better for short distance with the optic?
@Scott672 ай бұрын
Yes
@JFP19512 жыл бұрын
Nice vid….thanks for sharing
@Scott672 жыл бұрын
Thank you.
@johnnysmith20322 жыл бұрын
Can you make a video on how to remove and possible upgrade the hand guard?
I put a link where someone gives instruction of taking off handguard
@anthonyk8212 жыл бұрын
did you ever find someone with the hand guard?
@Scott672 жыл бұрын
@@anthonyk821 I found someone that gave some instructions on how to take the handguard off in my comment up above
@MrWhitelightning732 жыл бұрын
Outstanding
@Scott672 жыл бұрын
Thanks.
@slickrick411 Жыл бұрын
Is the rear sight a little wobbly?
@Scott67 Жыл бұрын
No.
@MrHollywood76452 жыл бұрын
Thank God for you I was just going to buy that 100 dollar rail!
@Scott672 жыл бұрын
Yea, I saw it too. 100 bucks is way too much. Glad I could help.
@mohammadkusbudiaji37242 жыл бұрын
Scott67, are you want to try shooting for 100 meter target? ...
@Scott672 жыл бұрын
About 45 meters.
@skhalid5002 жыл бұрын
Is it a pic rail or weaver?
@Scott672 жыл бұрын
Picatinny
@Napm3007 ай бұрын
Link to that sight? Or the name of it?
@Scott677 ай бұрын
Rail Mount Adaptor - Scope Claw Mount Picatinny Rail Mount, Fits for MP5 G3 8 Slots(Aluminumn) on amazon. Link is under the video.
@user-fl4wn9dn2cАй бұрын
Think the base should have ben pushed forward not all the way back.
@Scott67Ай бұрын
The small amount of recoil will work it loose quicker if pushed forward was my thought.
@user-fl4wn9dn2cАй бұрын
@@Scott67 I think you have it backwards, if you push to the forward it is less likely to move. firearm is going back towards shoulder, so optic should be forward. to elements movement forward is my thought.
@pewpewsaul2 жыл бұрын
Good video!!
@Scott672 жыл бұрын
Thanks!
@pewpewsaul2 жыл бұрын
@@Scott67 just ordered one , your video was recommended on my feed
@Scott672 жыл бұрын
It's a cool firearm and fun to shoot.
@FishKepr2 жыл бұрын
What are the torque specs for the mount?
@Scott672 жыл бұрын
No specs included. Screws are small so I didn't use my torque driver on it.
@FishKepr2 жыл бұрын
@@Scott67 Fair enough.
@_.king9._1022 жыл бұрын
The screws in this rail are tiny tiny. If you try and tighten them much they’ll strip. I put one on my 9mm and it ended up flying off. Does perfect on the 22 though. Just get them snug with some blue loctite
@pauliedweasel2 жыл бұрын
I just sold my older Umarex imported MP5AP model in favor of the new HK Imported MP5SD model, while that internal parts appear to be all the same the trigger housing on the new SD model is plastic not metal and I’m very disappointed that HK would cheap out like this. If I’d known this up front I would have never purchased the SD… Shame on you HK!
@Scott672 жыл бұрын
Style over substance.
@turbomonkeyexpress Жыл бұрын
I bought the WOLTIS Rail, and while it fits on the MP5 22 perfectly, the rail section was out of spec (too wide) and none of my optics fit.
@Scott67 Жыл бұрын
Sorry to hear. I have bought another one for my MP5 pistol and it worked fine with a different optic. I would return and get a replacement. It should work. Good luck.
@slickrick411 Жыл бұрын
Link for the riser
@Scott67 Жыл бұрын
Riser came with Crimson trace red dot. Link is below video.
@slickrick411 Жыл бұрын
@@Scott67 1"?
@Scott67 Жыл бұрын
@@slickrick411 .83
@Ruby_Sterling3 ай бұрын
I bought the HK parts mount like an idiot.
@Scott673 ай бұрын
Sorry to hear. At least it should be high quality.