Thanks Jeff, I just ordered one of these along with the Gladiator, so of course I pre-watched your assembly. Looks like a fun assembly. I liked the tape trick to remove the paint. Hard to believe a 1300 3S powers this big 4 motor plane. Love how scale it flew for you. Thats how I fly the Albatross, and its very enjoyable. I'll have to look on RCGroups for a mix walk-thru. Probably the same as my Albatross will work. This plane is a steal at $129.
@JeffsCustomRC2 жыл бұрын
Flys really good with diff thrust 👊🏼
@davidsnyder2383 жыл бұрын
Informative and fun build video Jeff. Nice plane!
@JeffsCustomRC3 жыл бұрын
Thank you sir👍🏼👍🏼
@Kwak463 жыл бұрын
Awesome video Jeff , keep the good work goin my friend ...She sure looks pretty...👊👊👊👍🇬🇧
@JeffsCustomRC3 жыл бұрын
Thanks Sean...this plane flys amazing and looks so nice in the air, thanks for watching 👊🏼👊🏼👊🏼
@hamiltonshangar3 жыл бұрын
amazing quality!! very nice!
@JeffsCustomRC3 жыл бұрын
Thanks Che’ , it’s a great model and flys fantastic, thanks for watching buddy👊🏼👊🏼👊🏼
@random_g-man97543 жыл бұрын
Please share a video how you set up differential thrust on a Spektrum transmitter
@nathanielpulling3 жыл бұрын
nice vid. jeff. she looks pretty good . also you might try to center punch those canopy holes with a push pin to keep your drill bit from walking
@JeffsCustomRC3 жыл бұрын
Thanks Nathanial...great tip, that would work well, thanks for sharing👊🏼👊🏼
@shanethepain20093 жыл бұрын
a DX8 i am guessing will do the differential no problem , i am going to add some clear rudder extensions and try rudder also
@JeffsCustomRC3 жыл бұрын
Hi , yes I use a DX 8gen2 and it works great, rudder should be nice on this aircraft as well, best regards 👊🏼👊🏼
@tombutler88003 жыл бұрын
For differential thrust, did the kit have all the wiring you needed. I would like to see how you have the diff thrust wired.
@JeffsCustomRC3 жыл бұрын
Yes it did Tom, plug and play as per manual, differential thrust was easy to set up with my spektrum DX 8Gen 2, pretty straight forward 👊🏼
@jacksonrcaviation3 жыл бұрын
Super nice, only problem I have is I don't have much patience in putting these planes together my son says😎🇺🇸
@JeffsCustomRC3 жыл бұрын
Lol...and I love it, thanks for the support my friend👊🏼👊🏼
@pea29113 жыл бұрын
nice video thanks :) how was it to fly? did it threaten to tipstall at any time? did it feel safe to fly? how easy was it to land? is it easy ti break propellers on landing? thanks
@JeffsCustomRC3 жыл бұрын
Hi...flys incredible with differential thrust and never indicated a tip stall, landing was nice as well with a slight flair before touching down, props are pretty rigid, so no worries there as well, really enjoyed flying this plane, thanks for watching 👊🏼👊🏼
@JeffinLowerAlabama3 жыл бұрын
Great Jeff, I'm doing mostly the same steps as you did. Did you remove the weight from the nose? Getting ready to put the Rx into mine now. Jeff in LA USA
@JeffinLowerAlabama3 жыл бұрын
Jeff just watched your flight video again, will remove the weight. Thank you, Jeff in LA USA
@JeffsCustomRC3 жыл бұрын
Awesome, can’t wait to see a flight, best of luck 👊🏼👊🏼
@milliemizelle66203 жыл бұрын
I watched you do this for about 30 minutes and you amaze me with all the knowledge you have to share!! Very nice video.
@markkremnitzky39119 ай бұрын
Have you usef tbeextra weight provided? Also does the manual indicate the right fitting of the props?
@FlankerTanker3 жыл бұрын
Thanks for the Video - the build/quality is very poor for a V3 of this model - it really could have been designed better .. but as you say it is Aero Modelling and like you I really like doing these bits , its like investing in something - I have some that go together with a few screws but they don't give the joy of modelling.
@JeffsCustomRC3 жыл бұрын
Thanks so much, and yes...modeling is a great thing if you enjoy it as I do with most any model I purchase, always love adding my own touches that stand out from everyone else’s , thanks so much for watching 👊🏼👊🏼👊🏼
@MONTY-YTNOM3 жыл бұрын
You going to show how you set the TX up ?
@JeffsCustomRC3 жыл бұрын
Hey Monty...I probably will, however I have the spektrum DX8G2, not sure if this will help you, but hopefully it will, Stuart also said that he was gonna do a video as well for his radio, thanks for watching 👊🏼👊🏼👊🏼
@MONTY-YTNOM3 жыл бұрын
@@JeffsCustomRC yer I foolishly brought the ORX 10i 😀 I think I'm the only one
@Tallguysrc3 жыл бұрын
What gyro are you using
@JeffsCustomRC3 жыл бұрын
I’m using the admiral 600/gyro
@Tallguysrc3 жыл бұрын
@@JeffsCustomRC Thanks my friend. I need to get one and play around with it.