20k Down the Drain pt 2

We are going back together and talking too much while we do its
Thanks so much for all the support guys!!! Grab a shirt/hoodie/patch
www.bunkerbranding.com/pages/...

[@holdenbros910]

Hey guys just a heads up, we drilled holes in the crossmember, but did not film it! Good lookin out guys! ❤

[@Chauc3r]

I hope you are going to put a top on that crossmember so that it doesnt rust out from all of the water and debris that will get in it.

[@30aught6]

Or at least drill drain holes

[@sedrickwells8545]

Man I swear that's the biggest thing jumped out at me.

[@holdenbros910]

We drilled holes in it!

[@brianselt291]

Great fab work…Trans brace needs a weep hole at least

[@robsdeviceunknown]

Please atleast put drain holes in that trans mount. It's going to get packed with dirt and mud. Let it drain or it will be a rust bucket in a few years.

[@holdenbros910]

We drilled holes in it!

[@davidball8]

Why not just box the whole mount?

[@BobbiDazzler]

Loving this 20k down the drain series. You guys sure do things right. Soothes the OCD. Keep up the impeccable work!

[@MAGAMAN]

Nice shop safety lesson.

[@Gijeff69]

Speaking of Drains, you guys probably should put a couple in the crossmember you just made or it’s going to be full of mud in no time!

[@xcool71x]

Poor Stephen bit it hard if that wasn't scripted then that was hilarious!! Another great educational funny video thanks guys

[@dalegereaux1863]

Don't you just love it when you have to fix other people's sloppy work ? I was one job I never looked forward to. It was usually easier to just start over and do it right. Could show with explanations today. 👍

[@builtbybo22]

Gonna be a wicked truck once you guys get done working your magic!! #BuiltByBo

[@Bearsnake_life]

It was great meeting y’all this weekend. Don’t forget about Rumble. Hope to see y’all on there soon.

[@missingremote4388]

Awesome suburban 4X4

[@isomer13]

Great episode. Thanks, guys.

[@andrewzach1921]

Comment for the algorithm, thanks for the video.

[@andyt4795]

Bitchin! Thanks for dropping all the knowledge and the creeper skateboarding scene LMAO!

[@stephenmiller6237]

I didn't know I wanted a Suburban with a Cummins, but the more I watch this...

[@sedrickwells8545]

I had this model truck and now I want another one with a Cummins or DD

[@chadthompson681]

Love you guys...from Demo!

[@chadthompson681]

Wish I could give you more than 1 👍

[@danielduncan6806]

Oh hoho! Look who's fancy, with his flare tool... LOL

[@berhorst59]

Before I started the video, I figured you were blessed with another job from Matt

[@garymessina1609]

Great work great video thanks Willy and Steven and crew awesome job

[@metalman065]

Like the other fella said, Either put a few drain holes in it or finish boxing it in, it's an open cavity for mud/ dirt to fill up, stay wet and cause it to rust out over time. Just and Idea.

[@keithreilly386]

You guys rock keep it up

[@timothylindsey9081]

Haha, I see that I've already been beaten to this comment, but that cross member needs to be capped and have weep holes! Haha, easy to say when you're not the one doing the fab work, I've just had that drilled into me in the mechanical engineering world!

[@SNAKERADIOS]

That was defiantly a Meth user who was bored and over zealous who made the exhaust lol. Wow man. Too funny. I feel bad for the owner of the truck. Ok guys keep killing it and never lift!!

[@jontruax1]

I'm enjoying watching this. Just curious as the bill on this. Id really love to have one built or build one myself. Lots of great info here. Thanks yall

[@chrissheathewoodguy]

one day getting a nice cnc machine I'm sure you would love to have.. I would want the top of the mounts capped so water and mud does not collect in them and rust out..

[@sethspiker]

Mud and water is gonna sit in the cross member.

[@someyoungguy6990]

I was thinking the same thing!

[@mid-misage3416]

Was wondering if they were going to address that.

[@user-xi7tf8je8l]

They could weld like a 20 gauge sheet metal top on it to keep the nasty out. Not like they need additional strength, just a cover really.

[@brettwalker6016]

Knowing them I would assume they’re accounting for that. Always good to comment though just in case.

[@justinbrown8759]

Keep the videos coming

[@user-xi7tf8je8l]

Never used Kotzur, but I’ve had good luck with Parks Engine Service in Seguin. They’re not fast either though, but the Cummins work they’ve done for me has been good.

[@markroper9269]

Cool video!! Lots of talking! 😝

[@derek13p]

Kotzur for the win!!

[@knighttaylor4272]

When Willie is doing the work and his bro holds the camera

[@christopherwedemeyer2993]

Here's a 'mint fer yer 'rhythms....

[@SootyDiesel81]

Them side step mounts look a bit how ya going

[@trevm3647]

As close as the oil pan is to the crossmember, with rubber deterioration and torque twist. Dont you need a little more gap?

[@heyletsplaythis]

Watch some of muscle Rod shops, metal work, he can make the weld seem completely disappeared

[@BrentTully-ct8hn]

Hi

[@lordofpain3476]

Whatever shop did the original work on that truck should close up and switch to making fertilizer , because everything that they do is shit . I have built better set ups in my backyard than they did , they are embarrassments to the automotive industry . Thank the Gods of Horsepower that there are still shops like Holden Brothers that do it right.

[@jamesbromstead4949]

How about using a flop tube in the fuel tank?

[@eddyquesnel6033]

I would be worried that it being open on top it would collect trash.

[@user-xi7tf8je8l]

Why no muffler in the exhaust? Straight pipe 12 valves drone bad. Straight through mufflers help a lot with the drone and don’t create exhaust restrictions/ turbo spool issues like a chambered muffler.

[@timothynaquin8899]

You need a white board for your "clear as mud" talks... Lol

[@SimonElenor]

Get an ArcDroid!

[@BOBKB5RLJ]

Put a drain hole or two or three or four in that transmission crossmember. I know you guys know better than that.😮

[@thef1sh17]

mahle = mah lee, per the germans that work there

[@jontruax1]

Update?

[@tylerbarrett6652]

Okay... so I must have missed part 1... but here I am trying to figure out HOW you sent 20k down the drain - it all looks like legitimate expense to me.

[@mid-misage3416]

Customer already dropped 20k for another shop to do the work, now Holden Bros are redoing everything that shop did.

[@tylerbarrett6652]

OOOOhhhhh.... okay. Well now that makes sense. @mid-misage3416

[@jonkillian9434]

I paid a shop to install a sump / Fass 165 on a 2g Cummins. They put it dang near the front of the tank. My driveyway is steep. Half tank minimum or your bleeding going out. Then you promoted a 3in exhaust. Shame

[@trxcummins7388]

Where was 20K down the drain part 1???

[@shelbyGT40]

...... where is part 1?………

[@desertvet1990]

Love your videos, but damn son, do you like to talk! Less words and more fabrication would make your channel a 1,000,000 subscriber channel

[@hankclingingsmith8707]

Too much red bull

[@loophead614]

Comment

[@hankclingingsmith8707]

Can you please repeat again,again,again,again

[@tobycatVA]

I would've brought the exhaust out in front of the tires.

[@tunesgarage]

Why would you do that

[@sictoday]

22:52 gunna fill full of shit. Rust out. Only thing I see wrong with it.

[@OjaiBonsai]

I haven’t wanted to watch this episode because you said -20k

[@staryder5329]

You explain things so many times it makes your videos really hard to follow. Show more, talk less!!!

[@mrolsen6987]

Or you can turn the volume off..

[@dan725]

I love all the explanations though. I find it rather critical especially for exchanging of knowledge.