Pt. 3- Cummins Swapped Suburban is DONE

The 12v Suburban drives for the 1st time under its own power!

[@Waterskibug]

I bought a F350 cummins conversion that the guy said he spent $26k from a shop in the Houston area. It was the biggest hack job I've ever seen. The guy finally gave up on it, i paid $5k which ended up being more than it was worth. I ended parting it out to get my money back. Its crazy what some shops pass off as quality.

[@snoozieq4584]

The smile on the owner's face during the test drive says it all. Now he knows where to go when he has diesel dreams for another truck. Great job to everyone involved in this build, rebuild, gettin her DONE!

[@jerryross821]

The new grill with the original color matched grill trim look fantastic. The relocation of the turn indicators is perfection. Looks as thoughtfully placed as the original design. High end fix and kool execution with the fabrication of that slotted aluminum keeper/bracket. Nice work! 🔥🤘🏼😎💙🖤

[@dalegereaux1863]

Nice work ! 👍 The customer looked very happy.

[@tobycatVA]

I would spot the lights being moved, but I have always loved these trucks. They look perfectly fine and clean and may actually add viewable distance. (safety 3rd) Holden Brothers don't F-around, or miss a trick. An 11/10 build or another typical Wednesday for you guys.

[@dalegereaux1863]

The grill looks better with the turn signal lights in the top corner instead of the bottom. Easier for other drivers to see also. 👍

[@mattfritch6375]

Good work guys. Turned out nice. Its the little details that you guys do that really set your product apart.

[@edcglassworks5771]

Your channel is going to explode. I’m always glad to see a new video out by you guys. Thanks for the content.

[@bullitjohnson9917]

Nice custom touch only true suburban owners will know that on the lights 👍

[@jefferyyoung6836]

Sweet build, I like when you tune to run clean not everything has to roll coal.

[@ringo2995]

Br-uh, I love all of your content but this Suburban -phoenix- (rising from the ashes) is AMAZING WORK! I would love to own something like this. I really appreciated the extended viewing too. Going to merch now.

[@gerrymilidantri6457]

The grill looks killer ! I love old suburbans I wish I owned this truck !

[@connieholdenchambers548]

Incredible! Awesome! Sounds amazing!!! Great job y’all!!❤

[@mikemccabe7124]

Painless Wiring makes an easy to replace everything its truely a complete wiring solution they even make complete sections of wiring harnesses that come from the fuse box which comes with newer style fuse box that goes from the inner or outer box & goes thruout inside of cab also they sell from the outer side of box on firewall & comes with all the wiring all with new connectors its a true plug n play kit that makes it so easy and fast to rewire the whole burban or just the sections that u need..

[@mikemccabe7124]

and not for nothing its easy while you're doing it to replace all light bulbs with led's they're just few cents more but brighter and last 50,000hrs vs Halligan with only a lifespan of 1000-1600 hrs plus it's so much cleaner lookin and looks 100 X's better not to mention it saves alot on power consumption so that your more accessories u can run

[@jessegriffin8457]

Factory grill is absolutely the way to go !!!!great call !!!

[@justinmartin2311]

Best way to spend a Sunday morning

[@michelle_chevellemmm1581]

I used to have a 90 Suburban. I bought it for $1200. It ran Good. I sure miss it. 😢 I like that Neon Green Blazer in your shop!

[@robwigglezz944]

Awesome rig. Nice to see a happy customer

[@markroper9269]

You guys sound glad that it is done!! 😝

[@jdgvee9313]

"Was it worth it?" Obviously a rhetorical question. Most Definitely worth it! 😃

[@someyoungguy6990]

The smile on the owner's face says it all!

[@donemmons5376]

Very cool! Good job guys!!!

[@garymessina1609]

Great rebuild great job great video thanks Steven and Willy and the guys

[@lokiwolfwood7942]

Hex yeah boys!!! the tirn signal retrofit and the new grill look great

[@hansottevanger4112]

As always, just another fabulous and informative video, you guys are the best , keep up the great video’s and l love the way you give credit to dudes that have done the work

[@BobbiDazzler]

Job well done guys. I better go and buy some merch so you can keep pumping out this content.

[@kiwioka51newzealand]

Good outcome guy's. Well done to all those involved with the rebuild

[@markporter5012]

Lights look good. Great job yall

[@nickolasgileski4316]

I’m not sure if you guys did or not because I havnt watched the whole video yet, but with the Agan fan works motor mount kit, you have to drill a third hole through the engine frame pad for the motor mount towards the bottom. You can see at 19:06 that it they only have two bolts at the top.

[@patches350]

Always Great Videos.

[@alexgon9627]

That's an awesome ballerburb ! Great job

[@richardfarmer6570]

Too bad he didn't bring it to you first but nice to see it done right. Grill looks great and if you hadn't mentioned it I never would have noticed the turn signals weren't in the right location.

[@Gijeff69]

26:48 Bro, it’s called a Rheostat.

[@andrewzach1921]

Comment for the algorithm, thanks for the video.

[@holdthatdown6695]

Definitely worth it! Love to see another SQRBDY back on the road.

[@RaymondCoggins-xd2re]

Awesome job

[@Chilly383]

Nice suburban I like the 5 ton in back ground too

[@proudpennsylvaniaman7996]

Yinz done good work ole boy

[@johnblegen1150]

I have an 86 Burban I would love to do this to great vid

[@SterlingBall]

Swapping a Chevy Cummins my self, always helps to see another square and parts sources ⬛ 👍🙃 the incooler im using has the horns im the middle, next is to fasten it to the core support ☺️

[@bill7320c]

Looks good

[@65cj55]

Tuff BullBars in Australia make a big ass 4 Post Bullbar for them, with Double Scrub Bars and Side Steps....

[@someyoungguy6990]

Aussie made, Aussie tough! The only place in the world where you can end ten years of drought with nationwide bush fires and then floods in under a year! We make our stuff hard, because it has to be.

[@65cj55]

@@someyoungguy6990 To Right !

[@arsenalchartersboatcaptain2771]

Suckers gonna be all dialed in when you fellas get done with it! 🔥

[@YCBL.700]

Nice!

[@ericganz2543]

Like what you did with the grille.

[@sb859]

Make sure you have a cover sheet on that TPS!

[@weedfreer]

Just a thought with regards to the indicators being moved to where they are...wont the 'lens cap/cover' now be directing the light up, and towards the on-coming traffic? It may be as simple a fix as to change the orientation of the lens cover on the indicator lights so that theyre turned 180°. It may however be an issie if the lens can only be fit into the case in a specific orientation only.

[@Waterskibug]

I just put some S&B silicone body mounts on my gmc. They seem nice, not sure if they make them for that model.

[@Juicejunkie409]

Go with the hockey pucks for the body mounts

[@adamhunt1694]

I think y’all are bad ass at what ya do……. I know you like including viewers but come on , yall do what you wanna do and I bet it turns out bad ass. Wish I could come hang out and clean up and the shop!

[@David-qx8jm]

The real question is. Is your intake tube in a box? Keepemcoming

[@davidblalock9945]

Ahhh! Too much chrome, I'm blind, i'm blind! Seriously though, I'd take those two unused panels and scotch bright them as a test piece to see if they can be brought down to a nice satin finish. If so, I'd check with the customer to see if he like the satin finish over the bright chrome.

[@compression_connection]

Whats up with the blue sweptline next to the suburban at the end of the vid?

[@earlarthur9378]

Can I call or come into the shop to get an estimate on getting my 4th gen tuned up a bit? I don't want no coal machine but I do desire some more power that's for sure.

[@rayperry7788]

Try LMC Chevy truck part specialist

[@nickgibson1191]

Needs a full or partial phantom grill to hide everything. Indicators look out of place

[@bradleynevills4444]

Dang so he's about 50k into this suburban

[@shawnsack1]

Lol no red fuel comments... so dissapointed.

[@michaelheiser861]

good channel , good content

[@toddhiggins6318]

So you don't think drilling holes in Hockey pucks won't work?

[@corycantrell4584]

I love you guys! However - Your video's make me motion sick - lol. I don't know what the fix is? But its just so jerky with the camera - seriously struggle to watch some of your videos.

[@kellyclasen1667]

I see Mats car in the background how is that car common?

[@ryanfriedrich7202]

Need to seemore work not just a talking a too

[@NGUFlips]

Looks dumb put it back the right way please

[@garymessina1609]

Great rebuild great job great video thanks Steven and Willy and the guys