Home made ultralight trike

[@michaelr2656]

Thank you for posting. Great setup. Simplicity at it's finest, Fly Safe

[@christopherxiong4412]

I used to fly aircraft from the past many years ago but, I had quit because I want to save money to finish my college educations. Now, I have finished my college educations, and then I want to start flying trike is fun for personal life.

[@safarmusafir2261]

Bro, please let me know how and where I learn to fly trikes

[@christopherxiong4412]

mansoor mansoor. Hey, brother if you want to learn know how to fly trikes let’s buying a trike is flying by yourself anyway but, you need to own your lands on your training fields for trying to start fly and landing back in safely anyways. I would like to be flying trikes because I have my own lands on my dreams of becoming a civilized person. Thanks for hoping to hear from you again. We’re going to fly up on the air approximately about 500-700 foot because the rules or laws required to be flying small engines. It’s no flying up higher than over above 1000 feet anyways so you’re flying upon the air higher than 1000 feet. You will be most likely hitting other airlines or airplanes. This is truly one of the rules that we have to obey for the avoid from accidentally happened on the airs. If we fly low is easy to be able to make a landing back on the fields, or any place that you feel to be safe. If you’re flying high or very higher and then you will be having more difficult time for you make correction for landing back on the ground anyway.

[@safarmusafir2261]

Okay, really thanks for your valuable reply. Please provide your contact number. My contact number is 0091 9656111456

[@richardcranium5518]

Does it have enough power ? To carry the balls it'll take to build your own plane !!!! You're awesome!! Keep it up

[@scottcozart8950]

Very nice!! Looks like the ATF. From north wing.

[@nevillecreativitymentor]

Pretty neat homemade design .

[@CFITOMAHAWK]

Simple and fun flying to the bar on the next county..

[@Sammur2872]

Thank you for sharing. From Thailand.

[@christopherxiong4412]

I love to see you fly your trike man some day in the near future I will need you to be my instructor for teaching me know how to fly this machine that it’s my true dream.

[@timmartino5314]

I know what you mean..be calm.

[@danielmartinez8534]

If you can please tell me how high is the mast on this trike is. I read you made it longer. how high is the hang block from the top of the lower alum tube? trying to learn as much as I can.

[@christopherxiong4412]

Replied to Daniel Martinez. I am not becoming a super flyer yet or successful people in the flying programs to earn more experiences yet. It’s very exciting for me know how to fly to see farther away from through out every single directions or every single details on the ground but, you have to be able dealing with problems solving of justifying on the wins. It’s very hard to become a expert on the air, the more you’re practicing for learning know how to fly will be gained more experience. I was a aircrafts flyer for many years ago, I feel like was no fun anyway, so that I quit my field on the training programs and then I went to the university to finish my education. Yes, friend. It’s very hard to try to become a civilized person because spending more money is paved your road to go research your knowledge to find details by details to the end and your times to learn to earn your privileges for becoming a better person. Thanks for hearing from you and hope our dreams will be truly life ok. See you again.

[@christopherxiong4412]

It’s very hard for me anyway because I was on runnings into the jungles of Laos for hidings from avoiding political concentration and political execution by communist Lao’s people take over power in Laos. I was hiding on the runaways into the jungles of Laos for 4 years and then fled to Thailand. Finally, coming to America for starting new life in here. It’s sadly for me anyway. I have to go down the very deep bottom to learn to scrape up on the top again to be able to build a new life in here. Thanks for allowing me share with you.

[@samsudin8509]

Sangat membantu buat kami atas ulasanya Terimakasih kami dari warga indonesian

[@johnmartin-ck4ot]

I like your build, simple and easy. This is what I want to achieve. How did you get started?

[@MasboyRC]

Very nice, how much the propeller size sir ?

[@skycowboyak4549]

49"

[@lamtientrung]

Hi! Can you tell me the type of engine and the kiln size of the impeller. thank you

[@skycowboyak4549]

Engine: MZ34, 48" prop.

[@worldwidesports4k]

@@skycowboyak4549 dam you smart dude👍👍👍👍👍

[@howardyin]

The current engine is an MZ-34 by radial engines in China...........would you like to provide the info of how to get the engine (dealer info)? thanks

[@ganismith3695]

The same question which I'm coming to ask !!!!

[@howardyin]

@@ganismith3695 read the flowwing reply below, you will find www.fiate.net/

[@Sohelrana-300]

Thank you for making such a light vehicle. I also have a long wish to make it like this. But its propeller is available in words and it would be beneficial to know the price.

[@lendiambour9157]

je pose une question qu'est ce qui fait avancer ce Trike il y'a rien dans les roues

[@Sk.petslover]

Please tell me which type engine you used and measurement of propeller... please reply.

[@skycowboyak4549]

This set up was an MZ-34 radial 2-stroke engine with a 49" prop.

[@Sk.petslover]

@@skycowboyak4549 how buy this engine. (Where from you buy).

[@KhushveerMaan-rf6gn]

How many digree you bend the main pipe

[@MisterstereoOso]

How do ya stop the risers getting caught up in the prop ?

[@oneskydog4401]

Put a hang glider on the mount, no risers.

[@stefantwotimes]

No safety wire for the big one that keeps you up?

[@R60us]

Is that a Tillotson HR181 carburetor?

[@skycowboyak4549]

Yeah, I think that's correct. Never liked this engine...had several engine outs with it...really finicky with different temps...sold it for a Polini Thor 250...much better engine!

[@R60us]

Thanks for the fast reply

[@angeloantoniorebelo4062]

Very well. Have you the project wif mensurament and angles this trike? Im living in Brazil

[@skycowboyak4549]

I should do that...others have wanted more details...maybe that will be another video.

[@steelpix]

I see Eagle trikes have build plans out for about $99.00. Single place.

[@marouenebelkhir8556]

Is there no danger if we not covered the propeller?

[@zeusons]

NIce trike. What wing are you using on it. I am building one out of round 4130 and am modifying a Kawasaki KX100 engine.

[@skycowboyak4549]

Cool. My wing is a Northwing T2 tandem.

[@allabouthunting7310]

bro can you share pics off your engine...?

[@jamessawkins3301]

How much do they have in all this I would like to get into this just don't want to buy a new one rather build my own the know how it's built

[@sutiyono9859]

Untuk bikin sayap ukuran panjang lebar berapa.

[@gmoac]

i would like to see how fit the wing. thanks....

[@tln8424]

nice build. Did you use plans or design it yourself?

[@skycowboyak4549]

Friend built it...no plans...and I modified it...

[@tln8424]

@@skycowboyak4549 Did a great job. Has it held up ok ?

[@tln8424]

I would like to build one like it with electric motor

[@skycowboyak4549]

@@tln8424 yes, it's lightweight and easy to put in the bed of a pickup truck...preflighting is really important to make sure everything is airworthy...there is always maintenance, but it is reasonable....

[@tln8424]

@@skycowboyak4549 I want to cruise as slowly as possible, just enjoy the view from 500 to 1k feet. I am down in Louisiana - don't have your kind of scenery.

[@abelmurua6980]

Awesome I want to build one for two peoples

[@jany201077]

may i know what is that seat coming from ,thank you

[@skycowboyak4549]

No...most of the frame is aluminum but it has chromoly wheel struts with 1/2" steel axles.

[@humanitynow1565]

How much torque and how many rpm do you need to make something like this ?

[@skycowboyak4549]

You need an engine powerful enough to push a lot of air (thrust), but not too heavy so that you can fly. A car engine is powerful enough, but too heavy...and a lawn mower engine is light enough, but not powerful enough. This engine weighs around 20 kg and produces 28.5 hp at 6200 rpm.

[@wakeupmadafaka]

where can i get engine like this ??

[@skycowboyak4549]

Search Internet for Polini 303 Thor...order that engine

[@UpcomingJedi]

Id like a flight deck on my trike (if i get one) too but it blocks so much view up front. Do you think it can go somewhere to the sides and still be visible?

[@skycowboyak4549]

There's a lot of freedom with making modifications on experimental aircraft so feel free to try out your ideas!

[@Rrbrt]

where did you buy the engine from?

[@bradbrown2168]

Sell plans?

[@rtroll7762]

Video of it flying??

[@theexplorer1095]

Hey which type engine are using

[@skycowboyak4549]

I am re-powering. The MZ-34 shown in this picture has become unreliable. I've got a Polini 250 on order...can't wait!

[@pilavasaplanmstornavida4926]

excuse me, how many CC's and how many cylinders is your engine.

[@TFGFilmandTape]

When you bought the used Northern Wing did it come with the struts/supports and lower "stearing" bar or did you have to make all that? In other words, when fitting a hang gliding wing to a trike, are you basically fitting the OEM existing wing into the "hang hook" at the top the mast and using it as it was originally designed? (sorry if my nomenclature is not accurate)

[@skycowboyak4549]

Great question George. Actually, to mate the glider to the trike, there is a bit of reinforcement and adjustment that my friend Brian and I did. First, we put an 18-inch long outer sleeve tubing over the hang point for reinforcement. Then a strap of 3/16" carbon steel was bent into a "U" shape and then we drilled a hole out of a block of UHMW plastic to accommodate the diameter of the tubing at the hang point. This plastic acts as a slick bushing between the hang glider tubing and the "U" hang hook that attaches to the trike mast. The hang hook with plastic insert is fixed to the hang point on the glider's keel by two compression C clamps on either side of it. Finally, we had to test fly this set-up at a couple of feet off the ground to see where the control bar trimmed out in the neutral position. Turned out that we needed to move it forward about a foot, so that meant swagging new front and rear control bar cables of the appropriate length to place the control bar in the correct position. Sounds like a lot, but once you understand the process, it's pretty straight forward and can be knocked out in a long day or two 5 hour days...

[@ganeshkumarv3236]

Good job Sir

[@adamabangura8981]

Where did you get the engine from

[@steelpix]

Compact radial engines

[@babanmagre9211]

Good

[@ramzy6683]

Hai bro sy from indonesia bagaimana bikinya.mesinya dari ap?

[@sakutaazusagawa208]

What are the specs of the engine used in the ultralight, and what is the model and price of the engine

[@youssefelectronic]

Hi can you help me with some information to make my own plane.

[@santiagobarros8738]

Hi, real nice job. What is the weight of the trike

[@skycowboyak4549]

With 4 gallons of fuel, engine and trike = 169 lbs.

[@Jae-dw]

What's the wall thickness on that square aluminum tube any idea?

[@skycowboyak4549]

I think it's schedule 40.

[@rkgupta1791]

Engine is how many cc's.

[@patrickmckowen2999]

Very nice How much thrust does it produce? I am getting an electric rig that will do 165 lbs of thrust and hoping to use that. What plans did u go by? Where is a good place to source wings, I am assuming u did a lot of reserch Cheers, Patrick

[@skycowboyak4549]

Hi Patrick, I don't know the thrust but it puts out 27.5 HP at 6000 rpm. My friend Brian has been flying trikes for 20 years and is a builder. You can get wings from sources on Barnstormers under trikes.

[@kmuralikrishna1582]

Hi Patrick/skydrive... I have a question I have monthly plan to go 10 hours journey around 500km one side .. So using this vehicle can I travel by air ? How many hours we can travel? What is the speed in air Please help me in reply

[@patrickmckowen2999]

@@kmuralikrishna1582 these are small short range leisure craft that are very weather window restricted. I would have to say no. Cheers

[@harshalnewalkar6371]

What is the width and weight of the upper wing?

[@donjayamaha6174]

What's the engine capacity

[@winsor68]

What wing are you using?

[@annappah6116]

Sir, engine name and price please.

[@skycowboyak4549]

MZ34, $3800, Carrie Zhao, Global Sales www.fiate.net www.compactradialengines.com Tel: [phone]

[@WessCastings]

Where could I buy this plane from?

[@RileyTheMonster299]

Is the whole frame aluminum?

[@paulodeamericana1]

Is this trip really necessary ? 🥀...

[@marcospaes1415]

Olá amigo, sou do Brasil e comprei aqui um motor como esse o meu é um MZ310, sei pouco sobre ele ainda não encontrei outro por aqui o uso em um paramotor mas veio sem o kit de partida, sabe onde encontrar?

[@skycowboyak4549]

捕获2 Carrie Zhao, Global Sales www.fiate.net www.compactradialengines.com Tel: [phone]

[@lanceralmeida495]

Creio q vc podera encontrar no amazon aqui nos USA. Gosto muito de trikes. Moro aqui ha mais 20 anos. Se quiser mais informaçoēs. Deixe seu contato. Deus acima,de tudo. Pai dos pais...

[@steelpix]

Does Brian have any info on this build? I’d love to build one. I built and fly a PPG TRIKE for 12 years now.

[@skycowboyak4549]

He's built a much better version since this build and would like to do yet another upgraded model...

[@sandrorellyson4219]

Teria como enviar os planos de construção

[@jimkwilecki9957]

Plans soon I hope.

[@NewajAhmed1]

What will be the price if I want to buy it or similar

[@skycowboyak4549]

Check out trikes under barnstormers.com. There is a wide range of prices...best of luck.

[@gammpigril]

NEXT VEDEO POPELAR LINK IN DISKIPSHION BOX.....PLESE.

[@gammpigril]

YES . I SAJEST YOU.

[@UpcomingJedi]

Looks like the prop should be off set lower so it sucks air over the fins instead of blocking them

[@BrennenNevermann]

Where did you get the engine

[@skycowboyak4549]

Bought it used from a friend (about 2 hours on it). The company began in Italy, was bought by a Canadian co in British Columbia and was just sold to a Chinese company. They are easy to work with and mail parts surprisingly fast: 捕获2 Carrie Zhao, Global Sales www.fiate.net www.compactradialengines.com Tel: [phone]

[@funnyanimalcompliance6721]

Can we use bike petrol it?

[@skycowboyak4549]

@@funnyanimalcompliance6721 No, you need an engine to power it.

[@christianfrank8131]

How can buy this motor?

[@mohammedfarhat9988]

Where can I get the engine?

[@harshalnewalkar6371]

Sir I am Indian sir I want to trike propeller but how to buy this, please guidance me & somebody help me,🙏🙏🙏🙏🙏🙏🙏

[@deshandilhara7270]

What is this engine how buy this engine

[@grayzhu]

Deshan Dilhara MZ34 engine www.fiate.net/en/

[@deshandilhara7270]

@@grayzhu thank

[@pooorman-diy1104]

such a small engine .... awesome

[@rosyhmar3815]

I wanna know this engine name

[@bijeetaseedsbd5353]

Price

[@skycowboyak4549]

Varies...$4k -$12K

[@daviddixon2166]

Good job! I'd fly it!

[@subramoniramaswamy956]

Wonderful

[@mrsong6332]

PLEASE ME ASK WHAT THE FRAME IS DOED?

[@dirkgrobler2179]

But does it fly?

[@keunwoochon8382]

Very nice! If you can share more information, draws... i want to try make one for me.

[@dmanjet1259]

Thrust ?

[@skycowboyak4549]

The specs say 165 - 200 lbs...I don't have a thrust table to measure it but would guess somewhere in that range...

[@nandasiriweligoda6701]

i like home made moter hanglider i dot no wing spase masher ment and expetion mashermant and properler thik ness and how maney long inchers properler plce send me detals

[@timmartino5314]

Can fly or not...?

[@funnyanimalcompliance6721]

How it build cost please tell me bro

[@skycowboyak4549]

Around $5k for trike, engine and wing (engine and wing were purchased used).

[@amantipexxjootipexxjoo3180]

Hi..can you tell me..cc engine..

[@skycowboyak4549]

313 cc

[@masoudirani2657]

ممنون Thanks

[@maslamgeegee1675]

price ?

[@skycowboyak4549]

Varys...new, more expensive ($12K), used less expensive. Mine was around $5K.

[@kimleng2381]

Could you tell me about how of engine

[@timmartino5314]

The machine from grass cutting machine...

[@hamedajubida8382]

Hi sir assamblinge wing only $ how much I want only wing assamblinge sir

[@rafiknagorinawab3879]

Good sr I made?

[@AmanKhan-we3tr]

Nano Trike Flight How Match Prise List video

[@michaeljeffrey5963]

It’s pretty amazing. Any chance you can give me the guys details, I would like one or know how to make one.

[@ciro8861]

ditto!

[@flexototal]

Hi, very nice, Do you have this constructions plans? If Yes is it possible send to me, I try to make one trike too. Very nice congratulations

[@skycowboyak4549]

I don't have plans...that's a future project. Good luck!

[@steelpix]

Does Brian have more info on the build? I’ve built and flown a PPG trike for 12 years now.

[@abhijitc215]

What you selling it .

[@fbtasteshow7904]

So good

[@redshiftcnc]

Awesome

[@mrskeleton2992]

Can you ride it

[@sayidmuhammad1966]

6 ovidiu suprema wanitanya diatas

[@علیرضاولینژاد-ح8ض]

Hello, good morning, please send me a plan for making a motor kite

[@pandiyan1477]

Very beautyfull

[@andrewscottnews7767]

Sorry but I would want it all welded together not bolted! Because if one of those boats come out mid flight you're going to be in trouble.

[@walidlazhar5134]

If i make it with engine thatvis power 50 cc it will work ??

[@skycowboyak4549]

Probably not...not enough power for liftoff...

[@t.e.c5871]

Do you need a license to fly

[@skycowboyak4549]

Nope

[@hascg1]

excelente solo falta el ala y a volar