HomeMade 212cc Engine CVT Clutch - Full Video

HomeMade 212cc Engine CVT Clutch
Torque converter for 6.5hp 7hp 12hp engines , predator engines and other engines.
for Homemade projects : gokart, car, buggy, atv, quad, mini bike, trike, tractor and more...
full video of the Atv quad : • Homemade ATV QuadBike ...
cheralauto.com/
Email : [e-mail]
Facebook : / cheralauto
Instagram : / cheralauto
Blogger : cheralauto.blo...
Twitter : / cheralauto

[@HueMongussD]

I didn't see variable, only constant. So it's a CT transmission?

[@anythingrc4715]

Continually transmission?

[@fuhkoffandie]

if you loosen that belt a little bit, you'll notice a huge improvement in the gear ratio change. you have to leave those belts on those cvt's loose, it allows for the gear ratio change. it starts out where the engine pulley is small, & the back pulley is large. as the RPMs increase, the front pulley becomes big, and the back pulley becomes small. this is your gear ratio change, and you should be able to see the CVT belt changing as this happens. yours doesn't move, I think it's just too tight it stays in one spot. should notice a 10 to 20 mile an hour increase, and still have the takeoff torque. but yeah, you have to loosen that belt.

[@niteshpingale8336]

And for rear wheel he need same gear ratio (for chain) i think same size gears because cvt output is already for wheel different gears for changes speed and consumed more fule

[@Stroim_sami360]

В чём проблема взять родную втулка со шлицами и на неё расточить звёздочку? Сцепление и ремень долго не проживёт при таких нагрузках...

[@alvindixon7104]

You might want to insert solid hardwood inside your square tubing keep the bolts from collapsing or crushing the metal under stress

[@bobboboff5326]

Это точно! Плохая конструкция 👎

[@mopedmessiah]

I could be wrong, but just from the close up of you revving it with it off the atv, it really looks like the variator you got doesnt have hardly enough travel closing to actually make good use of the cvt. Most scooter variators have more than an inch of travel along the boss to close, yours looks to only go a fraction of that. Its a cool idea with how you did it, but i think if you used an actual scooter variator itd have way more range and ratios

[@Muhamattaufik6]

That is peugeot 103 clutch😂😂😂😂

[@dekdinarani8857]

that geupap 😅

[@Baldys_projects]

Cool idea I actually thought about doing this by cutting them back half of a scooter transmission off and mating it with a go-kart engine with a variator on the front, on a side note them shocks look way too stiff looks like it's a go-kart without shocks lol.

[@ilhamrizqi5216]

I think it will be more better if the sprocket has a same size. But nice work

[@bobboboff5326]

Идея неплохая, но сделано все неправильно и очень хлипко. На день-два, потом все развалится. Вариатор похоже не работает совсем, а ведь можно же было использовать его потенциал. Для лайков собранное на глазок сгодится.

[@wolf_kit098]

Do not weld Sprockets..they will worn-out someday..find other solutions i know there is..

[@oikeaihminen]

Thank you, i used this innovation my projekt👍🏻

[@kennethdale9862]

That is not cvt. You are just in a low gear. Not variable transmission. You only used the clutch fuction of the torque drive on a cvt. The drive pulley on the engine shaft is not variable, the torque drive is variable. Thus you can see the belt is Shaking during idle. Belt is loose and only tightens when you rev up. You will kill your belt during high rpm.

[@jamesdelk8926]

With volks wagon engine cool custumized

[@jamesdelk8926]

Hey you must have five channels tech channel and other channels cool

[@liamnparadise1955]

Very impressive and a genuis idea, keep safe, kay Ma discover ra lagi ka.

[@TravelogsIndia]

man! you are a genius !!! i am thinking of doing something same with geared motorcycles. thanks for the idea..

[@CHERALAUTO]

Welcome

[@jgstv1331]

Le

[@حسينالسوداني-ح3ز]

👍👍👍👍

[@pshemek5625]

Can u send me link where u bought this variator?

[@karaca1100]

Peugeot 103 moped variator

[@reality6937]

bagu mo naisip yan nagawa ko na

[@GoogleUserPH]

Akala ko wala pipino nag vcomment hehe

[@willieneilson9185]

doesnt articulate, needs softer springs

[@ควย-อ6บ]

อีกกี่ร้อยครั้งลาซาด้าที่มึงรอจะบอกกู.รู้ด้วยนะว่ามีสววรค์มีนรก

[@ควย-อ6บ]

กูเขียนลอกแต่มึงแก้บอก

[@philjean9403]

The engine they just cut in half is one of the best I cannot believe they did that that is one of the best two-stroke engines out there oh my God I still can't believe they did that why did you cut it it was such a good engine

[@Markko1986]

Those engines are plenty. Not that rare to be a pity to sacrifice it.

[@philjean9403]

@@Markko1986 that engine was a better engine it was two stroke and now you got it hooked up to some lawn mower engine need to mix cement two strokes will always be better

[@codyhinson3352]

Most def a 4 stroke

[@jeremyandjennifer6974]

Gy6150 is 4 stroke

[@Thappitak8214]

เชื่อมเเบบไม่นึกว่าสเตอร์จะหมดเเล้วจะต้องเปลี่ยนเลยนะครับ

[@Projectt69]

ATV matik wkwkwk

[@nguoiphanxet1]

Tào lao

[@shoominati23]

WHy didnt you just use a piece of tubing with washers welded to each end to bolt the sprocket on instead of welding it? I guess it's never going to need changing anyway, so carry on..

[@joeythomas9062]

Manni wish i had the know how tondo this!!😢

[@ЮрокСумы]

И получилась очередная снопо вязалка.

[@sompong9178]

4x4

[@witosarlaw]

Mantap bang... cocok untuk go kart

[@geyeyeyeueye367]

👍👍👍👍

[@tawaing5395]

กำลังเหลือๆ ✌️✌️✌️✌️💃💃💃💃

[@harryrenner4016]

That's not a real CVT system that is just a clutch that engages. a real CVT system is also a transmission that changes gear ratio though the RPM range. on a real CVT system. the sheaves of the primary clutch move together pushing the belt to the outside of the sheaves. while doing the opposite on the secondary clutch. this system did not do that. it might be that the primary clutch and secondary clutch were misaligned. it is absolutely crucial that the primary and secondary clutches are aligned perfectly. I know this from many years of working on snowmobiles that use CVT systems. in fact they make special template tools for aligning the clutches when working on these systems.

[@JS-yb9if]

I know a guy that does this ,he swears it works great but im skeptical of long-term

[@johnhendrickcano276]

Someday i will build one.

[@DeadguyAi]

Looks bouncy, maybe letting some air out of tires would help

[@CHERALAUTO]

Good idea

[@manuelfranciscohernandez3125]

what did you do with the piston and crankshaft

[@nguyenkhanhsg3101]

hi you have a great idea it's very good wish you good health

[@penetratormax]

Есть ощущение, что ремень долго не продержится...

[@sbri733]

Can for make traketor

[@arthurlezzano4700]

Bos glindingane papat Piro lengkap sak pelek e

[@firstnamefirstnamelastname3213]

I ike this but gasoline tank near weldine spark is dangerous.

[@djilu9916]

u know it will be a good video when theres chicken sounds in the background

[@JennHuge]

3sR##

[@kikiriski6017]

Not gud choosing tramission but nice idea to using old scooter

[@АгапАгапов-с3ъ]

🤦‍♂️

[@pars4709]

Totally AMAZING!!!!!!! 😱😱😱😱😱😱😱😱🤗🤗🤗🤗🤗😯😯😯😯💡💡💡💡💡💡💡

[@brianb8830]

The rear shock has no travel otherwise you would be throwing off the chain drive.

[@billydonnelly7378]

Might want to lower pressure in tires......

[@thepirate2023]

bravo,tres bonne invention,c est possible de me dire ,c est quel embrayage pour l avant ,coté moteur ,merci

[@toff5812]

peugeot 103 mais il a enlever le système de démarrage a la poussette

[@алексеймамошин-т3ъ]

Да врот компот каждую минута реклама. ради принципа не стал смотреть.

[@mynameisjouli.]

Iso ae pakde iki..

[@heraclidesvieira9471]

Nossa que gambiarra

[@gokins981]

Nice job .what is the max speed ???

[@CHERALAUTO]

about 50 km/h

[@anthonyquinones1465]

I've been plotting this to install 212 predator on to Honda Spree problem Honda Spree Drive is in reverse would still have to cut up a gy6 motor to use that rear portion

[@GENERALCHAOS13]

i need the model of the engine side of the clutch to see if theres a 1inch bore for a 406cc engine

[@webhomemadeprojects1173]

I think it's not rev high rpm to full engage the clutch. But it works all that's matters. Great build.

[@CHERALAUTO]

Thank you

[@epicmaster9831]

e davvero un ottimo veicolo il prossimo video lo voglio vederlo al mcdrive

[@РУСТАМ-ъ9у7в]

ОЧЕНЬ ХОРОШАЯ КАМПОНОВКА ВСИВО

[@robertpolicastro1]

Funny thing is that the original scooter engine has almost the same hp as that 4stroke junk you used and is capable of much more

[@passawitthepsuwanxxx5541]

เสด สา เวดนา

[@suzikuchannel]

Mantap 🥰🤝

[@rahmatmetaldetektorpalopo]

Good 👍

[@CHERALAUTO]

thanks

[@jasperdomacena6491]

has no rear suspension flex but it's cool

[@wiwinwidyo6176]

Itu pengganti roler nya pakai apa om

[@СтасЗавещевский-р1п]

В любой ситуации приваривай звезду к валу,так бы все и делали.

[@jamesdelk8926]

Now you got 9ut door drilling equipment cool

[@daleyfun2247]

Did he just weld the sprocket 🤣

[@SakMakey]

😄

[@ruslanginiyatullin9582]

Взял распилил длинную мину 😀

[@jamalfilali1303]

Amateur

[@blackpit3147]

Very well! Cool idea! I really like it! I love these designs, especially home built ones! Big like! Definitely a Subscription!

[@ecm5555]

Я думал только в России такое колхозят )))

[@gioncaezar2335]

really very creative friend, always successful, greetings from Indonesia

[@AnwarBengkel]

I like it your video Good

[@โมตาดแจ่มๆ]

fc ครับ

[@rdaystrom4540]

You can buy the entire cvt kit on eBay for $55.

[@budipirang2694]

Wow

[@pedrodeoliveira3036]

How much cost a compler kit ?

[@lhawoekcreator]

Good job.

[@pra7277]

Давно сделал уже передачу по такому принципу, видео на канале есть, про трактор из хлама

[@digeberaja9272]

Good idea

[@CHERALAUTO]

Thanks

[@ГеннадийШапилов-ж1н]

Много раз такая мысль посещала, поженить GX-160 c вариатором.

[@gilaspinoytv]

nice video

[@gibigarage9104]

Nyimak om 👍👍👍

[@josecarlossiqueiramoura3396]

he's the one with the strength hahahaha

[@-Je2021]

Já deixei o like

[@mhexaalghifahri39]

CVT CONTINUE VARIABEL TRANSMISI

[@stephangeagea6151]

Your work is good, well done. I congratulate you on this ingenious skill. I love you. I will support you with a like and a subscription to the channel, and I tell you to continue.

[@alianzasintegrales1410]

Hello how many horsepower does that motor have?

[@josephwade3241]

6.5 hp

[@ИванТовышев-и3в]

Он медленый

[@yantrealmeparents842]

can this be attached to the boat

[@249renanhipolito3]

Parabéns pelo vídeo

[@anonymously241]

What is the top speed?

[@saulromero5129]

Thsi is exactly what I want to do to my trailmaster 300 but use the chinese clutch and a 780r front clutch.

[@fer19508]

Kk

[@stephanegluck6887]

Bravo

[@satyajeetmahajan3085]

Wonderful 💐💐💐💐

[@mengkokjo2346]

do it tutorials ok

[@tomasedisonortiz5342]

Nice

[@LeandroDasilva-ui7vc]

Não consigo entender