Homemade aluminum boat - Jack daddy customs - part 1

starting on a journey of building my own boat. first one from scratch. follow the progress, its gonna be fun!
#DIYprojects
#jackdaddycustoms
#boats
#duckboat
#homemade
#outdoors
#fishing
#fabrication
#millerwelders
Part 2 - • Homemade aluminum Boat...

[@3Beehivesto300]

I’m watching your video 3 times now. Working on my own boat…

[@JackArmstrong-jackdaddycustoms]

Watch them another couple million times each and let the ads run. Lol. Seriously tho, I hope they are helpful.

[@chriss8206]

Is the greatest boat hull ever made out of aluminum in my opinion was the tracker avalanche in the early and mid 2000s. it was a one piece hull that was hydro formed by Boeing for tracker. if you can get your hands-on 1 of those hulls I feel it's 1 of the best hulls ever made.

[@binkswhitesocks6737]

great Idea more power to you. Looking forward to see the videos

[@JackArmstrong-jackdaddycustoms]

Appreciate it. Hope you enjoy the process

[@TylerBerard-g2d]

Great video, cool that you bought that material next to the shop I work at!

[@JackArmstrong-jackdaddycustoms]

appreciate it!

[@ep6091]

Awesome videos! And full of great info! I live in GA and have welded for years, been wanting to build my own boat but have never known how to get the metal. Thanks for all the tips brotha

[@JackArmstrong-jackdaddycustoms]

Glad to help. Let me know if you have any questions. I may be able to help you out along the way with specifics if you need it

[@DirtandI]

@@JackArmstrong-jackdaddycustoms I’m about to get started on mine. Been trying to find your socials to reach out, where can I find you?

[@JackArmstrong-jackdaddycustoms]

@@DirtandI fb and insta. Jackdaddy85

[@wayneeden98]

Yes siry dude, details are everything, and no doubt it come out looking nice just make dam sure you triple check everything

[@JackArmstrong-jackdaddycustoms]

That’s right

[@Papaws-Hobbies]

I have watched a lot of these fo got to say you answer a lot of my questions. Thanks.

[@JackArmstrong-jackdaddycustoms]

Glad it was helpful! thanks for watching

[@terrileigharmstrong1557]

I’m sure it was all you’re amazing help that made day one such a success 😆

[@JackArmstrong-jackdaddycustoms]

No doubt about it

[@JackArmstrong-jackdaddycustoms]

get ready for part 2 dropping next week

[@HadensCinema]

i build hulls and weld keels and transoms at seaark boats in monticello, nice job you did, next project, build your own jig so its easier on you brother, awesome work

[@JackArmstrong-jackdaddycustoms]

Thanks. That means a lot. I saved a few of the drops to use as templates. Maybe one day when I retire I will have enough time to build them regularly and make a jig. lol.

[@bokatiesmith4173]

Unbelievable! You are the man!

[@JackArmstrong-jackdaddycustoms]

Appreciate it brother. Ready to be in the marsh

[@DavidJones-hk1lu]

Day one a huge day Bro. Jack! Looks like a duck boat already. Well done.

[@JackArmstrong-jackdaddycustoms]

Thank you. Just needs a marsh and a migration to start.

[@austinzielke2347]

What was the total all around cost for the hull to build

[@drewryan1877]

so what exactly did you ask the company when they bent the metal for the hull. I’m looks into building some boats. I have an aluminum welder and have welded for some years. But looking into working for myself some and building boats. Also around what was the price for it?

[@JackArmstrong-jackdaddycustoms]

i told them what profile i wanted on the sides and that i wanted a 56 inch bottom with rounded chines and they sent me a pic for my approval. price will vary based on hull size but they charged a flat fee for bending it. i think it was 500 but that saves a lot of time and welding... well worth it.

[@shannonlocklear8116]

Great video, I love the finish product. I’ve been welding for 20 plus years. Been thinking of building my own, verses buying a Seaark Catfish boat. Did you do a price comparison , building verses buying?

[@JackArmstrong-jackdaddycustoms]

absolutely. materials will be cheaper for sure. if you factor in your time though, you will have as much invested as a cookie cutter boat. for example, i could go buy an allweld just as cheap as i built this boat, but it wont be made as well or as custom as i want. [nothing against allwelds, they are great boats] BUT if you take your time, you can have something that is comparable to a prodigy or timber creek... and at a fraction of the cost. so the real savings come where you are willing to go the extra mile. there is a reason that some boats cost 10,000 and others of the similar size cost 40,000. on top of all that, its awesome to put your personal stamp of homemade on a boat... and know every inch of the welds are by YOU. good luck with it!

[@shannonlocklear8116]

@@JackArmstrong-jackdaddycustoms thats what I was thinking. I’ve been looking at some of the Seaark models, my boat would be for fishing. I know I haven’t seen an Alweld that looks remotely as good as your boat. How thick was the sheet for you hull? Thanks for the reply.

[@JackArmstrong-jackdaddycustoms]

@@shannonlocklear8116 1/8 and all of the stringers and tubing was 1/8 as well.

[@terisulistio533]

What you use welder machine?, that specialy for alumunium welder or we use for stailess too.

[@JackArmstrong-jackdaddycustoms]

I use a miller multimatic 215 with a 150 amp spoolgun and 100 percent argon.

[@terisulistio533]

@@JackArmstrong-jackdaddycustoms ok thanks👍👍👍

[@brocksestak]

how wide was the total sheet before they bent up the sides of the boat?

[@JackArmstrong-jackdaddycustoms]

96"

[@DerrickParker-g1d]

Did they do the breaking for you or do they sell them like that?

[@JackArmstrong-jackdaddycustoms]

@@DerrickParker-g1d they broke it for me.

[@AndrewNazzaro]

Sorry if you've been asked this before. How many hours do you have in this, how long did it take you start to finish ?

[@JackArmstrong-jackdaddycustoms]

@@AndrewNazzaro it’s hard to tell exactly because videoing the project takes so much more time but probably between 150 and 200 hours.

[@AndrewNazzaro]

@@JackArmstrong-jackdaddycustoms awesome. Thanks for the reply. You did a great job. Thanks for sharing.

[@leviwheeling5207]

What were the specifications for them processing the sheet of aluminum you used for your bottom sheet. I noticed it came pre shaped

[@JackArmstrong-jackdaddycustoms]

No real specifications other than size. I told them I wanted a 1756 with flat bottom, rounded chines, and a side profile similar to a havoc or f4. They come in 8x20 sheets so that’s basically what you have to work with.

[@leviwheeling5207]

What were the dimensions for the template you used to shape the front. I assume if I get the base width and the height end to end I can replicate it. This is the only issue i see myself running into

[@JackArmstrong-jackdaddycustoms]

@@leviwheeling5207 6 inch to 0 vee at 5 ft long. There needs to be a slight inward conclave, like around one inch at the most.

[@leviwheeling5207]

Im not far from Broussard la so I’ll be using pierce aluminum aswell im in the planning process at the moment. If I have anymore questions I’ll just come back to the comments. I do appreciate your advice so far it’s been a big help

[@JackArmstrong-jackdaddycustoms]

@@leviwheeling5207 I’ll be glad to help however I can. Good luck.

[@brianpolocoser1937]

They bent that for you? The shape of the boat?

[@JackArmstrong-jackdaddycustoms]

@@brianpolocoser1937 yes. Saves a ton of time on welding the sides of the boat.

[@jrrevolt688]

So I've got a question, what were the measurements you gave the metal dealer to have them bend your haul? Or is that a secret

[@JackArmstrong-jackdaddycustoms]

ha. no secret. BUT i didnt submit any measurements, just explained to him with general numbers over the phone and described what i wanted the profile and radius to look like and he sent me back a proof. Unfortunately, that guy retired and i dont think the new salesman at that place will do that anymore. i believe they require some formal drawings with measurements. I built another one not long ago and told them i wanted the same profile as this one and he made it happen then too.

[@jrrevolt688]

@@JackArmstrong-jackdaddycustoms ok. Thank you

[@codyturpin2719]

Where did you buy your aluminum sheeting and where did you get the bends?

[@JackArmstrong-jackdaddycustoms]

@@codyturpin2719 pierce aluminum in Broussard la

[@JoeealJon]

Ini barulah baru bosku 1 keluarga bekerjasama 🤭

[@jasonwilliford4432]

Did they break the hull for you at Pierce?

[@JackArmstrong-jackdaddycustoms]

Yes

[@kaleblovell5889]

Did you have trouble with the aluminum trying to warp on you while you were welding the transom or the sides to the rake?

[@JackArmstrong-jackdaddycustoms]

Not much at all. I tried to weld about 6-8 inches at a time and move around. The floor was the worst to try and warp, but even it didn’t warp bad.

[@kaleblovell5889]

@Jack Armstrong thanks.. im about to build a 17'6" scooter boat.. what was you measurement at the top where you 1st started cutting for your Semi -V? If you don't mind me asking

[@JackArmstrong-jackdaddycustoms]

@@kaleblovell5889 I’m guessing you are talking about the width of the v I cut out. It was about 6 inches I believe with a slight radius to 0. 5 ft long. Didn’t cut anything off of the sides as they come in when you bring them together.

[@kaleblovell5889]

@Jack Armstrong awesome man thank you so much

[@tangsu7128]

Hello. What is the thickness of the aluminum for the floor in millimeters?

[@JackArmstrong-jackdaddycustoms]

2.54 on the inside floor. 3.175 on the outside hull material.

[@charlieschwaninger6864]

Do you have a rough material list for everything inside the hull? And is there anything you would’ve done different? Thanks

[@JackArmstrong-jackdaddycustoms]

6061 2 pieces gunnel 20’ 9 pieces 1x2 tube .125 21’ 1 piece 2in sch 40 half pipe 6’ 1 piece 4in channel 12’ 3 pieces 1.25 pipe for rails 8’ 5086 .125 8x20 sheet bent into hull 5052 .125 5x12 sheet decks .100 5x20 sheet floor and extra Sourced from scrap yard 6 in channel for catwalk 8 in channel for transom

[@JackArmstrong-jackdaddycustoms]

Only thing different would be smaller motor but that’s got nothing to do with design of boat.

[@charlieschwaninger6864]

Thank you about to order mine thru Jeremy!

[@JackArmstrong-jackdaddycustoms]

@@charlieschwaninger6864 nice. Good luck with your build.

[@billygreen316fishing]

Hey , Nice Job ! Did the Metal Supplier form/bend the bottom like that for you ? I want to look into building me a boat , I live 20 minutes from Slidell La and would like to look into pricing. Thanks

[@JackArmstrong-jackdaddycustoms]

Thank you. They did. Call pierce aluminum in Broussard. They can get you a quote quick. Very knowledgeable about boat building there as well.

[@billygreen316fishing]

@@JackArmstrong-jackdaddycustoms Thank You !

[@FosterOutdoors]

What is the size of your boat length and width across bottom?

[@JackArmstrong-jackdaddycustoms]

Just shy of 18 foot length. 56” at the bottom

[@paulwelch5570]

Dang how much was the aluminum. I like the hull design

[@JackArmstrong-jackdaddycustoms]

Thanks, I don’t really want to throw totals out there but It was much cheaper than buying one the same quality.

[@paulwelch5570]

@@JackArmstrong-jackdaddycustoms just give a rough $

[@JackArmstrong-jackdaddycustoms]

@@paulwelch5570 lol. What if I have to sell it for some reason and people will say, I saw your KZbin comment with how much you got in it. They’ll beat me down.

[@paulwelch5570]

@@JackArmstrong-jackdaddycustoms yea I understand that I rebuild wreacked car an people say but you didn't give that much for it. They don't count your labor an parts thanks I'm in Alexander city Al around lake Martin

[@johnarmstrong8367]

off to a good start!

[@JackArmstrong-jackdaddycustoms]

thanks big dog!

[@johnarmstrong8367]

@@JackArmstrong-jackdaddycustoms 👍

[@Papaws-Hobbies]

How much was the aluminum. I want to build me one as soon as I get garage built.

[@JackArmstrong-jackdaddycustoms]

It all depends on the size of the boat you build/size of metal. I don’t really want to say the price, especially since the price fluctuates so much with aluminum. I will say there is no comparison to building vs buying if you are willing to put in the extra effort to make a premium boat. I saved about 75% from what you would pay for the premium boats on the market.

[@DAWGGHUNTER]

HI Buddy ,awesome videos! what thikness of aluminium do you use? thanks

[@JackArmstrong-jackdaddycustoms]

1/8

[@JackArmstrong-jackdaddycustoms]

Thanks btw

[@DAWGGHUNTER]

@@JackArmstrong-jackdaddycustoms THANKS!!

[@josephmeirink1073]

Where did u get your aluminum?

[@JackArmstrong-jackdaddycustoms]

Pierce aluminum. They have several locations in the southeast but I dealt with the one in Broussard

[@onemissionoutdoors]

I am building a boat and planning on doing the exact same thing you did to the front with the bottom of the boat. Can you explain a little more detail the wedge you cut out to give it that point? I know you went back 5 feet into the aluminum but how wide was the piece you cut out it at the top? Was it a curve or a straight wedge?

[@JackArmstrong-jackdaddycustoms]

It ended up being about 6 inches at the front. It has a slight curve in the cut, it’s not straight. The easiest way to say it would be to mark your v straight and then get about half way and measure in to the middle of the v about an inch. If you make a continuous curve from the front to back and intersect that mark, it will be about the right curve. I would certainly get a piece of cardboard make a template though. For your template you could do one side of your curve and then fold it down the middle and mark your other side so it’s an exact match. I hope all that makes sense.

[@onemissionoutdoors]

@@JackArmstrong-jackdaddycustoms thanks that is actually a perfect response! I’ve been having a hard time even finding any information of how big to make this cut out in the middle, that should work perfectly for me!! thank you very much again!

[@JackArmstrong-jackdaddycustoms]

@@onemissionoutdoors glad to help. Good luck with your build.

[@devinlombard3157]

What ya welding machine set up?

[@JackArmstrong-jackdaddycustoms]

Miller multimatic 215 with 150 amp spoolgun. Running .030 through a .035 tip and 100% argon

[@MultiShannonb]

That is a sick build. Do you happen to have the CAD plans?

[@JackArmstrong-jackdaddycustoms]

Appreciate it. I didn’t use any cad plans, just started building it to suit as I went along.

[@MultiShannonb]

@@JackArmstrong-jackdaddycustoms how did pierce know how to break the bottom. Anytime I send them anything to quote they want a cad file

[@JackArmstrong-jackdaddycustoms]

@@MultiShannonb I just described what I wanted. The Broussard location is the deal. I called a couple of closer ones and they weren’t much help.

[@MrGmcz71502]

Do happen to remember who you talked to? I called today and told me it has to be all wrote out for what you want. I called the Broussard place. I guess it depends what “sales person” you get.

[@JackArmstrong-jackdaddycustoms]

@@MrGmcz71502 it definitely does. I talked to Frank but I’m pretty sure he retired like a month ago. He was the deal. I have talked to other “salesmen” there and they told me the same thing. I’m not sure which ones would be the helpful ones now that he is retired.

[@kennyb_1926]

So I'm looking to build one myself. Would you be able to share the information of the company you got the metal from?

[@JackArmstrong-jackdaddycustoms]

Pierce aluminum in Broussard La.

[@boardwalkbw7130]

I'm guessing you asked the metal company to bend a whole sheet of aluminum into the bottom of the boat?? Maybe I missed you explaining this?

[@JackArmstrong-jackdaddycustoms]

Yes. I told them the profile I wanted and he bent it. He can cut the sheet before he does it though so you don’t have the whole piece in that shape. In other words, you can have a flat piece of a drop if you don’t want the whole length.

[@Thebriceh43]

Who did you have bend it?

[@JackArmstrong-jackdaddycustoms]

@@Thebriceh43 pierce aluminum in Broussard. Sorry, I just saw this comment.

[@WesMan97]

Hey Jack, what part of Alabama are you from? I’m over by Dothan. I just got an ESAB 235 and a spoolgun. I plan on building one similar to yours once I’m not blowing holes through everything! What’s the thinnest metal you are able to run with your setup? And what hull thickness did you go with? Thanks man.

[@JackArmstrong-jackdaddycustoms]

My hull is 1/8. Easily weldable with a spoolgun. I rebuilt a Jon boat and used 14 gauge to skin in. It welded nice but it wasn’t easy. Had a few blow throughs and if it wasn’t a really tight fit I had to spurt spurt spurt a couple places. So I would say that’s about as thin as I can effectively run. Fresh clean 1/8 is a joy to weld. Looks as good as tig in most places. Also, I’m over by Andalusia

[@WesMan97]

@@JackArmstrong-jackdaddycustoms I was blowing holes in 1/4 when I first started trying it out. I’m new to welding all together though. Im gonna start working my way down till I build some confidence and hopefully can lay beads on 14 gauge. I’ll likely have lots of technical questions for you when I get started!

[@Tdog9915]

If you don’t mind me asking, about how much did the material cost to build this? Thanks!

[@jasongrinnell1986]

A lot. Lol

[@dakotaswanke2366]

Try buying it now priced double from my hull I built last year to my new one this year!

[@danielmayfield2195]

Could I please get a price on how much the raw aluminum cost ya. I live in Covington Louisiana and I’m really interested in trying this for myself

[@danielmayfield2195]

Mainly interested it that first large piece that was already shaped

[@JackArmstrong-jackdaddycustoms]

@@danielmayfield2195 it will all depend on the size but they charge 500 for the bending of the hull and the rest is dependent on the market cost. Plan on around 6-7k for the metal.

[@daltonseneca8552]

Jack, do you have a material list so I can get a price?

[@JackArmstrong-jackdaddycustoms]

6061 2 pieces gunnel 20’ 9 pieces 1x2 tube .125 21’ 1 piece 2in sch 40 half pipe 6’ 1 piece 4in channel 12’ 3 pieces 1.25 pipe for rails 8’ 5086 .125 8x20 sheet bent into hull 5052 .125 5x12 sheet decks .100 5x20 sheet floor and extra Sourced from scrap yard 6 in channel for catwalk 8 in channel for transom

[@normanhebert2388]

Yes get it pre crimped

[@DarrenDaniels-o6x]

What size is the boat

[@JackArmstrong-jackdaddycustoms]

1756

[@bradleyhicks4539]

Looking great. What type and thickness aluminum did you go with?

[@JackArmstrong-jackdaddycustoms]

Thank you. 5086 .125 on most of it.

[@cmrock123456]

What was your filler wire?

[@JackArmstrong-jackdaddycustoms]

@@cmrock123456 5356 for everything on the outside and at the bottom. 4043 everywhere else.

[@Archangelmarine251]

7:44 what kind of machine are you using?

[@JackArmstrong-jackdaddycustoms]

Miller multimatic 215 with 150amp spoolgun

[@jasongrinnell1986]

Awesome build. Did they bend those side for you?

[@JackArmstrong-jackdaddycustoms]

Yes they did. Saved hours of welding.

[@jasongrinnell1986]

@@JackArmstrong-jackdaddycustoms I bet it did.

[@hayesdomingue1491]

@@JackArmstrong-jackdaddycustoms what did you ask for to get them to bend it?

[@JackArmstrong-jackdaddycustoms]

@@hayesdomingue1491 I just described the profile that I wanted to the guy and he was able to do it. I pretty much told him that I wanted a stepped out gunnel that looked like a mix between a havoc and an excell f4 but with rounded chines. He made it happen and I couldn’t be happier.

[@hayesdomingue1491]

@@JackArmstrong-jackdaddycustoms thanks for the reply. You have me wanting to try and build one now

[@sgrssnckls]

Do you have any templates/drawings on a website or material ordering guidance that you would be willing to share? I watched the whole series. I loved it and now I want to give it a try. 😂 I want to try and follow along and build a similar hull.

[@JackArmstrong-jackdaddycustoms]

No templates or plans. Just the video and I’ll be glad to answer any questions. I have a list of everything I ordered. I will post so you can see.

[@JackArmstrong-jackdaddycustoms]

6061 2 pieces gunnel 20’ 9 pieces 1x2 tube .125 21’ 1 piece 2in sch 40 half pipe 6’ 1 piece 4in channel 12’ 3 pieces 1.25 pipe for rails 8’ 5086 .125 8x20 sheet bent into hull 5052 .125 5x12 sheet decks .100 5x20 sheet floor and extra Sourced from scrap yard 6 in channel for catwalk 8 in channel for transom

[@sgrssnckls]

You're a gem. Lol. I'll be rewatching these many more times.

[@JackArmstrong-jackdaddycustoms]

@@sgrssnckls watch them a couple million times each. 😂

[@sgrssnckls]

I'll see what I can do. 😆

[@quinnwebre1150]

How wide was the pattern they gave you

[@JackArmstrong-jackdaddycustoms]

You tell them what you want. You have 96 inches to work with so you just have to keep that in mind when you are figuring your profile. If you have straight bends, a 56 inch flat bottom gives you 20 inch sides.

[@quinnwebre1150]

Thanks what about the V cut out how do you measure that out ?

[@dirtmcguirt6118]

Awesome videos man. I’m building something similar to a gator tail 1750 with a mod v. Are you satisfied with the size V that you cut out? Or would you make any changes if you were to do it again? I noticed it looked like there was a slight dimple where the v meets the flat after you brought the sides up. Also, how is that transom style holding up. I’ll be mounting a gator tail surface drive and this seems to be the same transom design

[@JackArmstrong-jackdaddycustoms]

Nice. The size v is good and another guy borrowed my template and cut his the same and loves it as well. Mine did have a slight dimple but it doesn’t protrude deep enough to hurt anything. The transom is great so far and I think it would be just fine for a shaking mud motor. lol. I wish I could have a mud motor on this one but we can’t where we hunt. Good luck and reach out if you have any questions.

[@710Boys]

Man I love your videos and I’m following along. But what gauge aluminum do you use for the outside haul and all inside pieces?

[@JackArmstrong-jackdaddycustoms]

Appreciate it. Everything is 1/8 except the inside floor. It is .100

[@710Boys]

@@JackArmstrong-jackdaddycustoms Now is that 5052 or 6061 aluminum? And does it really matter in your opinion

[@JackArmstrong-jackdaddycustoms]

@@710Boys hull is 5086. Floor and decks 5052. Everything else 6061

[@710Boys]

@@JackArmstrong-jackdaddycustoms I really appreciate you brother. I took on a little bigger project then expected and don’t have the knowledge for everything. Have a good man!

[@JackArmstrong-jackdaddycustoms]

@@710Boys no problem. Where you located? Would be glad to help if you are close.

[@caseyteel8909]

You got me ready for duck season. Roll Tide.

[@JackArmstrong-jackdaddycustoms]

I’ve been ready since I left the marsh.

[@JackArmstrong-jackdaddycustoms]

And roll tide

[@JackArmstrong-jackdaddycustoms]

get ready for part 2 dropping next week

[@blakefoster6324]

When you weld one side, do you have to go back and back gouge from the other side before welding the second side? If so what tool are you using to back gouge with?

[@JackArmstrong-jackdaddycustoms]

No back gouging really… just the places where the weld came through a little hot I used a flap disc to clean it up before welding that seam.

[@RyanRamos-n4l]

Get them helpers some helmet s your to good of a Dad to give a acadential flash

[@downtheriverforge]

thanks for this video Jack. If you are ever back in Louisiana, come checkout my knife shop. I would love to learn a thing or 2 from you. I am interested in building my own aluminum Jon boat. Cheers, Stephen Bateman

[@JackArmstrong-jackdaddycustoms]

I’m interested in forging my own knife just afraid of another hobby. What part of la you in?

[@downtheriverforge]

I’m in River Ridge, about 10 minutes from New Orleans. I feel you about picking up another hobby, haha.

[@JackArmstrong-jackdaddycustoms]

@@downtheriverforge may have to stop by if I'm over that way again.

[@downtheriverforge]

Please do man, shoot me an email [e-mail] Take care buddy, Stephen

[@jamesstephens949]

How I can send you pics what I want . I not know what you got now you build boat . Look alot easy . I don't have any shop right now but someday . It hard find one like that .

[@dmanhonda2]

Hey brotha I have a few questions is this the best way to get in touch??

[@JackArmstrong-jackdaddycustoms]

Sure

[@dmanhonda2]

@@JackArmstrong-jackdaddycustoms where’d you come up with the plans on the hull? And I’m sure I can get drop prices bent instead of the whole sheet??

[@JackArmstrong-jackdaddycustoms]

@@dmanhonda2 I didn’t have any plans. I just had an idea of I what I wanted. I looked at my favorite part from a lot of the quality boat builders and tried to put them into one. When I talked to pierce aluminum I told him that I wanted my hull be like a mix between a havoc and an excell f4 except with flat bottom and rounded chines. He made it happen. Much of the inside I designed similar to some prodigy and timber creek and the transom is similar to timber creek and prodrive. Just new want I wanted and went to it with cardboard.

[@dmanhonda2]

@@JackArmstrong-jackdaddycustoms my only problem is I’d be taking my plans to a local shop but they don’t build boats but they have all the equipment to do what I need.

[@JackArmstrong-jackdaddycustoms]

@@dmanhonda2 I’m sure if they do it everyday they would be able to work off of a drawing. Take them some sketches of what you want or a picture of a boat hull you like and see what they say. Where are you located?

[@renerusso3332]

"Transom should be at least 1/4" thick, not 1/8" thick. Ok😮

[@renerusso3332]

"Hey Buddy, leave the" Boat Building " to the "Pro's!" That boat is worth $Millions" because of the time you wasted and could have bought a better boat! OK?😅

[@lamineladdi9596]

Instead shoing the boat you put your face on screen all the Time . Why men?