Homemade Filipino Kali Dummy

[@KenpoMoogy]

Man, at first I said what the hell. Once you demoed it I get it! I love it and it can be applied to boxing wing Chung so much. Nice job!

[@philipmcrowsr7528]

The Black Knight Training dummy that fights back with broomstick throwing capability, nice. looks simple enough, good practice, a rubber sleeve with hose clamps should work for holding the spring & stick together.

[@alfredoalmencion7615]

Thank you Ervin for showing me how I to use the spring of the car antenna. In my turn I suggest you install old bicycle tires around the 4x4 post you're using.

[@franciscogomez6279]

Hey Ervin great Idea, I would say turn the stand diagonally about 45 degrees and cut out a flat spot to set the base, set some tire padding above and below as well as extend it or not cut it off at 5 foot but cut it at 6 foot tall!! OK now Im acting crazy! again great job.

[@repillager]

Great start! Excited to see how it continues. Might want to add a tennis ball to the end to help reduce head hits. When I can I'll make one of these or mount to the fense haha!

[@gmee123]

Stick that post into a buck of cement, so you better practice maneuvering around and circling :) Duct tape around the spring and stick would do wonders too :D

[@nareromero8969]

Gracias por compartir tus conocimientos. Saludos hermano desde VENEZUELA. Namasté 🙏

[@ervin.quintin]

🙏🏽

[@seanbautista2606]

Great idea! I’m going to make myself one. Thank you!

[@BayaniWarrior]

My friend I just saw this now and I’m inspired. Great work! Looking forward to making one myself

[@ervin.quintin]

BayaniWarrior Let me know how it works! Good to hear from you

[@jonbowles508]

Thanks for turning me on to this I built my own with multiple springs so I can move arms to different positions works great I added rubber tires to the post so that I can also beat on something you're the man

[@RoninZDojo]

Great piece of equipment. I definitely will try to make one myself following your instructions.

[@poginurse]

Very Cool video. Thanks for sharing. Can I asked what type and size of tools did you use to remove that piece?

[@wheelchairluke9463]

Glad you posted this, I’ve been looking for something like that barrel spring for ever! I will be building one of these!

[@nycesl]

Very nice. Did you do anything more with this? Did you ever make another version or have other people made other versions that you have links to?

[@peterjohnson5268]

Love this concept I will be making it and posting a video soon after thank you so much the barrel spring idea was the best trick I'm seeing so far

[@nycesl]

Did you ever make one and post a video?

[@michaelmouser8256]

Good job, check out PEX pipe, it’s way tougher than PVC, it will last longer. If the diameter is too big on the pipe, I’d recommend filing the inside of the coil, so it doesn’t weaken your pipe. Best wishes.

[@saburwolf2792]

Very Creative👍👍👍👍👍👍🥋🥋🥋🥋🥋🥋💯💯💯💯💯💯 I'll keep that as a food for thought. Thank you for sharing.

[@soheibbenchikhlehocine1530]

Smart work my friend

[@mmarco8743]

Really nice.

[@ericjude8618]

Not bad for a first build

[@crossfitpittsburgh1542]

Well done.

[@Internalflow33]

Bit of rubber strip under legs will lessen any rocking. Top work. You could put another arm on rear then you can step off and work your way around whole dummy...

[@jarrodpelrine7229]

Definitely super cool 😎

[@burachattanpradit4450]

very good idea...

[@ИринаРябова-ф6л]

Good for you,Sir!

[@cliffordr.gregorio1890]

Nice idea, thanks for posting. What exactly is the name of the spring and the ball thing? Thanks.

[@gjeetkunedo8170]

I like the concept but trying to figure out how you got the bottom flush against the wood?

[@cheyneorejuela4640]

Great work . perfect for home self training

[@chriskeele]

Definitely round off the centre column

[@slatham8616]

Awesome!

[@denden01161]

Use garage spring, made this 15yrs ago, build my own full set up. Bags dummy hands, n sticks vertical n horizontal.

[@TuhonHarold]

Great idea!!!

[@colinbuhler3860]

you could put on some pads, so there are areas to strike empty handed aswell, or even knees, elbows. nice thing. wish i had one.

[@stickdog5428]

Great bro. I was thinking of this 20yrs ago, cant think how 😂 considering at time just a simple kid and just have yo use what i can see in the backyard 😊

[@stanleywallace3759]

A breakthough in sports equipment. Any thoughts on padding the lower portion of the stand?

[@ervin.quintin]

Stanley Wallace Good idea! I’ll have to try a few things out

[@yurisavchenko4032]

thanks nice Idea!

[@johnmisanes7986]

This is a great idea. Thanks for sharing the video

[@operater43]

Cool design brother, looks like it could also be translated into bo and jo staff. Love the foot support idea.👌🏽

[@paulmanogue6519]

great vid, thanks. love the spring arm hardware.

[@thewarriorsway1084]

Genius idea

[@elconquistador9921]

I built something similar but with 5 sticks at different angles. The first one I did was years ago and I showed it to Guro Dan Inosanto. They don't have springs though. Might have to upgrade. Ha

[@mikepidler4824]

Awesome

[@theo9845]

You can adapt your device to Wing Chun training dummy, I would think. A sturdier pole, stiffer spring action, etc. Good idea my friend and great potential for development.

[@alcosmic]

terrific

[@azothamenti3378]

Great idea

[@GBlues1]

Nice! I like it!

[@marchaire5911]

How did you pry the end off of the spring?

[@ervin.quintin]

I used a vice to hold it still, then used a flat head screw driver to wedge it out slowly. Eventually when it was far enough out, I took some pliers and pulled the rest of the way. A bit of patience and elbow grease. It was worth it at then end, though.

[@doktordanomite9105]

You ever think of mounting it with a square peg and multiple square holes so that you can vary its guard.

[@nycesl]

Very cool

[@phaniinvincible919]

Do some padding with foam Ervin it will give safety to both dummy and stick that's pretty cool dummy you made keep rocking

[@raysian7751]

Where did you buy this spring set?

[@richardwest2505]

Nice job love it however stay away from using PVC pipe if you get too vigorous it could break, shatter, and turn into shrapnel

[@pekestyxx6674]

Maybe if they wrap it in duct tape it will help keep that to a minimum when it does break

[@bobpickens1]

Nice

[@sherylcastro5688]

Great job!!!! I like it. I’d order one if it’s shippable.

[@rossroble2605]

how did you pry the end off the spring? I got the exact one you have and I can't get it off haha.

[@ervin.quintin]

I used a vice to hold it still, then used a flat head screw driver to wedge it out slowly. Eventually when it was far enough out, I took some pliers and pulled the rest of the way. A bit of patience and elbow grease. It was worth it at then end, though.

[@ktugaoen]

That's awesome.

[@KrishnaSingh-yt3rq]

Impressive

[@harvestblades]

I know this was a prototype,& over a year old now, but throwing on some adjustable feet like what you can put on furniture would give you the ability to easily, & quickly adjust the dummy so it is level, & eliminate wobble especially on rather uneven ground. It will also help keep untreated wood off of the ground so it will last longer. Treated material would also be more durable though it is pricier, & heavier.

[@internationalhiphopscreenw7866]

Nice job

[@schattenkrieger4355]

COOL, Nice Idee 👍👍👍 you have a new abo

[@Rami7605]

Could improve the stability using a concrete filled bucket as a base

[@bristol132]

I like it.

[@arc3075]

Great idea, don’t do the pvc pipe. PVC can shatter and it will have sharp edges to it. That someone or yourself can be injured. Other than that, Excellent!!

[@cathedralofsmile]

I will watch your career with a great interest.

[@karakoshzee5326]

😎

[@FRANZTONI123]

Hello. Unfortunately, I can't find the right accessories on the internet. Can you kindly tell me the source of the "spring system" from the "Homemade Filipino Kali Dummy" ? Thank you for your reply. Greetings Henry

[@carllubrin8518]

What is that thing called holding the stick I want buy one and do a tkd pad holding

[@robertwomack8653]

I might do one but cement it into the ground.....make it about six foot and add a leg lol

[@ryanward4819]

I CAN NOT GET THE TOP OF THE SPRING OFF! : ( How did you do it?

[@ervin.quintin]

I used a vice to hold it still, then used a flat head screw driver to wedge it out slowly. Eventually when it was far enough out, I took some pliers and pulled the rest of the way. A bit of patience and elbow grease. It was tough to wiggle it out but worth it at then end, though.

[@ilpjr1]

Nice..

[@emilyedwardsgyf4100]

Hi I can't buy jbc986 what can I replace it with?

[@arcadia09]

I want one

[@hvyduty1220]

nice job.............!

[@ritchellagumbay2782]

How to by the materisls?

[@panther_mountain]

Exelente !!!🤜🤚☯️

[@AjaychinuShah]

PVC is good for everything. Even a Bo , but that’s Liberal.

[@davidsno3501]

Do you live in Atlanta? I’m in Suwanee. Would you be willing to meet up for a session?

[@ervin.quintin]

Actually I live in Virginia Beach. I got the Atlanta shirt from a grappling tournament a few years ago

[@chitlinray]

Very cool