Homemade Off-Road Go Kart Project - Full video

[@mopeooo]

Bless your heart. Reminds me of the first time I saw a Mexican put jelly on a tortilla. I asked him why he did that. He told me "before we had jelly, we had nothing".

[@brianjohnson9368]

This thing looks super sketchy but I take my hat off to anyone that can think up a plan and see it through to fruition. You got a hell of an imagination and amazing dedication to task. Good job.

[@ازهر-ط7ن]

❤❤❤❤😂

[@donellmuniz590]

I've seen a lot of these DIY, low buck builds, but the guy will have a plasma cutter, a vertical mill, a lathe, a frame table, a water jet, a TIG welder, etc! LOL

[@jlgonthebeat]

Fr man 😂 I got none of that. I’d have to go to a shop or something to be able to build anything

[@Vinlaell]

Yeah I know another good KZbinr is homemade madness he doesn't have no fancy tools I mean he does have a lathe but he built that himself and he also does a lot of work without the lathe shows you how to get by also doesn't spend $1,000 on square tube to make a jig uses wood

[@Its_Me_Wheelz]

@@Vinlaell Rather be Welding you are speaking of?

[@MasonCarroll26]

Erm actually he had a STICK welder 🤓

[@trevorward85043]

This was raw, improvised genius. Nothing scripted in the way you wanted to build it and it works. Great job. Loved watching this build.

[@MyLife-lg6tg]

Your aptitude and creativity will greatly benefit yourself when you work for yourself, and NOT some one else! Go for it! Dan S. Michigan & Texas

[@BlindmanValley]

Kudos for making due with what you have available and it turning out as good as it did. I think the only thing I would really suggest is using bearings or at least a pillow block set up where your main drive axle is because it appears you have run the axle through square tubing only and that won't last very long.

[@geraldlaurin9289]

Like the simplicity of the build. Good work!

[@beanosmanyes9050]

DID YOU REALY WATCH THE WHOLO VIDEO!?!?

[@НиколайНеверов-з8ш]

То что вы делаете достойно внимания многих людей это реально круто

[@CHERALAUTO]

thank you very much it's nice of you

[@andrew030588]

Outstanding creativity and guts to turn a thought into something tangible. Your aptitude and and creativity would be a value to anyone who's intelligent enough to employ you. Great seeing young adults prove they can build a better and more creative world.

[@CHERALAUTO]

thanks for your positive feedback

[@porky379]

Shut up andrew your poor

[@daichimax]

Thank you for sharing your project! ... Something that I miss from your video was the brakes.

[@saidaouadi6613]

Excellent, young man. But you have to protect yourself from accidents. And you know the mountain roads are very dangerous. You have to build a protective cage. And that the brakes support the car with front disc brakes. I wish you health and well-being ... Your brother, who lives in Algeria

[@bl00dh4nd5]

literally blood and sweat went into this build, props man

[@CHERALAUTO]

thank you for your support

[@bl00dh4nd5]

@@CHERALAUTO thank you for the good content keep it up bro

[@JeffreySiler]

Build something bigger than what you have we no that you can build something more massive than this please show us your skills and good ideas thank you very much so far 👍👍👍 buddy

[@jdw7092]

คันนี้โครตชอบ เบาะกับเครื่อง เยี่ยมจริง..คันนี้มีปีกนกล้อหน้าแร่ะ ส่วนล้อหลังไม่ชุดดิเฟอร์เรนเชี่ยน..เล็กคล้ายเอจีวีเว้ย..โดนจริงๆทำแต่ละคันออกมา ใส่ซัสเปนชั่นอีกอย่างเด่ว ขายได้..👍👍👍💖💖💖

[@victor440_]

I give him a A+ look at the tools he's using and what he came up with is awesome, and it works he is having fun. That just makes me want to go do something in the garage. Awesome job 👍👏🙌 that is bad ass for stuff laying around.

[@CHERALAUTO]

thank you so much

[@eulogiodelacerna7699]

@@CHERALAUTO Good day, Are from the philippines? If yes, HM ?

[@eulogiodelacerna7699]

@@CHERALAUTO Good day, Are from the philippines? If yes, HM ?

[@pisthtp9130]

ខ@@CHERALAUTO

[@alhakeemalfarsi]

me 2 i give him A+

[@LordDirus007]

Great build Terrible welds Awesome design

[@mattleggett5609]

May not have been the best welds but give the guy credit for having the idea and doing it, regardless it be fun to ride around on so nice job

[@CHERALAUTO]

thank you

[@moderator896]

who cares as long as they hold

[@mattleggett5609]

@@moderator896 yep idc it aint mine but hopefully it does hold!!

[@АлександрФилатов-ъ4п]

Вот капец изобреталь❤❤❤ красавчик

[@jairoalfaro7057]

Muy bueno saludos de Argentina 😀

[@HomeScanRollouts]

I'm impressed this guy works fast

[@FOOKYOUTUBENUMBERS]

Is this the guy who restores all them 80s & 90s cars to perfection?????

[@happinessisnotfortheservan9524]

Nice👍 good luck

[@kevinchanel5026]

Bagus sekali kreatif sekali saya terinspirasi

[@walshwheels]

Well done mate considering you used the most basic tools.

[@brucewald4078]

I need to get a welder. This is way cool. Turned out really well. Very inspired.

[@adambartholomew6703]

what kind of welder is that?

[@mr.braapalicious]

Great job in using what ya have. Looks like a fun kart...

[@morgang5509]

except for the wheel base about to flip at any second

[@rubendelgado5510]

Sos un capo mi hno.muy lindo su trabajo .siga a delante con esto.

[@JoaoBatista-zr8tq]

Parabéns pelo seu trabalho e incrível. Deixei o 👍🏼também

[@danielelohim5819]

Nice! I'm building a street kart using a welding machine I made and a lawnmower engine I converted to horizontal shaft.

[@haisupercar]

You make a great car and you love making cars, I am like you but I have to study in your place a lot

[@quatzio5828]

Very entertaining to watch just like the previous videos :) please keep them coming

[@CHERALAUTO]

it's nice of you to say that

[@baandiy6928]

งานนี้ได้เลือดเลย สุดยอด

[@epicmaster9831]

e uno dei veicoli più fantastici del secolo il prossimo video lo voglio vederlo al MCdrive

[@stevenjennings8347]

Awesome informational educational video experience Y'alls God Bless Ya 🙏

If that rear subframe does not brake in half I really need that stick welder!!!

[@SirChevy]

I bet the stub he welded onto the end of the crankshaft breaks first.

[@so_enganado1043]

@@SirChevy haters em pleno 2020 é foda.

[@so_enganado1043]

Faz melhor. Kkkkkkkkkk

[@arthurwessel3226]

this is awesome! Nice build

[@CHERALAUTO]

thanks

[@johnhumphrey7223]

Nice job man. Can't wait till the next video. Keep them coming.

[@g86jn1]

Awesome job dude ! That’s something to hand down to your kid .

[@wijayacanel4062]

Keren mobil nya kreatif👍

[@celsosu2992]

Que Chingon .... Buen soldador, buen mecánico... Excelente trabajo muy buen artesano.... Saludos

[@ivanabregu1]

Tiene que mejorar muchisimo en la parte de soldadura, en realidad deveria tomar un curso. El proyecto es buenisimo!

[@مصريبيحبالموسيقي]

I know that relieving smile you got there, Believe me you deserve it, and own it! :)

[@CHERALAUTO]

thank you so much

[@asethembekhumalo3789]

Wow

[@dabosssr24]

Good job buddy! Looks great. 💪🔧

[@CHERALAUTO]

thanks

[@juanmercado138]

Bongbong marsos to presedent

[@FloridaMan0561]

Gotta love home builds.

[@jimmyjackass1805]

Sweet making something useful with limited resources shows great skill and determination .

[@CHERALAUTO]

thank you for your attention

[@pathbelow6652]

@@CHERALAUTO very sturdy frame. Nice build for an adult. Build a body and fenders for it. All weather usage. Cool. 😎

[@so_enganado1043]

Parabéns pelo trabalho excelente. Me distraio muito olhando esse tipo de coisa.👏

[@Vinlaell]

I love how your wire brush is actually a grill cleaner

[@paulorodrigues6727]

Muito bom vc é fera. Ficou muito bom mesmo parabéns

[@эдуардуспенский-н4х]

Харошая тачка получилась😀

[@RizaOriga]

Good job bro

[@BMW_XORAZM]

Very good work bro👍✊

[@marioguerra2036]

Excelente trabajo mi amigo 👍👍

[@CHERALAUTO]

Thank You

[@hrasif2209]

Nice video 👌👍

[@CHERALAUTO]

thank you

[@LordBandit]

Wow 👏 bravo!

[@زيدالعراقي-ذ7ب]

طارق نت

[@juanramonfajardohn3849]

UN EXPERTO SEÑOR LO FELICITO!

[@makingcookingfixing]

Nicely done! It looks a little long and narrow though.

[@CHERALAUTO]

thank you for your attention

[@theflytyer2742]

You have some good craftsmanship

[@jonathanbharat3420]

Great work

[@CHERALAUTO]

Thank you for your support

[@jonathanbharat3420]

Your welcome

[@Sergeifoodj]

Очень интересно и потрясающе , правда не совсем понятно зачем делать сначала сзади одну пружину , а затем сразу же на этапе финальной сборки блокировать её трубой) И прикол, что по итогу на последних видео покатушек передняя пружина расположена иначе) Я так сразу и подумал на начальной сборке что та первая конструкция будет не совсем удачна, вот и автор работы после заездов понял , что что-то не то))

[@charlesdefrancisco5056]

Very clever...and well done

[@CHERALAUTO]

thank you

[@omlette447]

Beautiful!!! Go kart👍👍

[@newenglander4513]

This was never going to be a precision build and it wasn't meant to be. The use of triangles throughout adds the strength needed. All up, a great job and one to be proud of. Double welding over flux is not a good idea though, I don't think I saw a chip hammer in use at all. Great video.

[@omkarmore763]

Nice 👍👍👍👍 vidio

[@justinleonard3162]

That geometry on the suspension though 😂

[@anthonybautista305]

Can be improve its kinematics and suspension by right selection of shock absorber

[@LeonUnger]

@@anthonybautista305 Yes. to much hard for the actual load.

[@calholli]

22:50 .. Who needs bearings anyway.

[@jayyouel8804]

@@calholli love the axle through the scrap metal square tubing

[@ansarakram3171]

@@anthonybautista305 نڵدسدلڕەعەەەهەەەەەiiuuyu

[@muhammadhasanol3023]

Nice work...👍👍

[@CHERALAUTO]

thank you

[@moumounibamba4707]

Génial 👏👏👏

[@CHERALAUTO]

thanks

[@kwjuggernaut6755]

The ad rate on this video is wild

[@kenthorne9705]

It should have a 6 speed 1000cc engine, may have to use larger shocks. For what you did I commend you

[@vampiregirl32]

Is that will be badass 😎🔥😎 what's a 1000cc

[@damonhardy6793]

@@vampiregirl32 Motorcycle engine

You do know that it’s already a death trap even if he changes the gearing. It does not need a larger engine.

[@vampiregirl32]

@@damonhardy6793 with turbo two of them 😻💯💋😈🥰☠️😈

[@vampiregirl32]

@ I know there's a deathtrap but you can make it safe if you want to add a roll cage to it or other stuff to it 😉🤣

[@timstewart567]

Welding on a stump. Now that is cool!

[@itahadsteelweldingwarkassh9313]

Good❤

[@harryburford6629]

put some bearings in back where your drive pullies are other wise they will slog out and sooner or later they will cause your chain to come off

[@jayyouel8804]

If you can roll that chain on, it can roll itself right off haha

[@abdoulayetellydiallo]

C'est formidable

[@neliohenrique9285]

Parabéns pelo seu trabalho bom demais mesmo villl eee.

[@vampiregirl32]

I omg do love a 👨 know how to build awesome stuff 🥰🥰

[@CHERALAUTO]

thanks

[@shaikmabu5612]

🔥,beautiful

[@shaikmabu5612]

Work

[@njmxjunkie3128]

What did your suspension components come off of?

[@maheshchavan637]

Nice 👍👌

[@CHERALAUTO]

thank you so much

[@Jaguartmb]

A man after my heart. Built better than mine though! Well done. Does the jackshaft have bearings?

[@bolsonaro9437]

O Tião ficaria orgulhoso

[@calholli]

22:50 .. Who needs bearings anyway.

[@krejziks3398]

lmao, actually my dad my first buggy back in 2002 without bearings, it's fine, the engine was i think some beat up 49cc tomos, so it didn't run more than 40kmh, lol. Probably not even that much.

[@oscar-wf6si]

Excelente tutorías de amigo

[@Datboi-fv3pl]

@@krejziks3398 i have a 350 small block im gonna try to put on a go kart😂

[@jakechunasamy9642]

@@Datboi-fv3plI have a 420 predator with a torque converter and performance air filter and exhaust and I bypassed the governor I’m trying to fit it on my go kart

[@manuelmendonca8482]

Well done mate , but you really need bearings on that slave shaft , it wont last long. Apart from that nice job something from near nothing I take my hat off to you.

[@octanedemon5548]

Man I wish I'll make a buggy someday Exelent project but it's a many ways to improve it ... Like do an Ural motorcycle swap And btw I'm sorry 4 my English

[@stephangeagea6151]

Your work is good, well done. I congratulate you on this ingenious skill. I love you. I will support you with a like and a subscription to the channel, and I tell you to continue.

[@achmadjauhari859]

Sehat selalu sukses Aamiin

[@frederiquerijsdijk]

We've seen the production progress, we've seen the live demo, we've seen the catalogue shots, where's the price!

[@witosarlaw]

Mantap bang .🙏😊

[@SuperJimbell]

Really great job...and welding too : )

[@raymonddam6587]

Great job man! I really enjoyed your video!

[@arabellajan3316]

that was awesome bro

[@CHERALAUTO]

thank you so much

[@EmersonAntonio-s6h]

Está bien práctico y funcional

[@CarlosGonzalez-kt5be]

Yooouuu!! What SAP??,GOOD JOB BROO .. SALUDOS FROM: "THE BRONX " NEW YORK .

[@myscoretop8363]

mil respetos es excelente tu go kart sigue así :3

[@CHERALAUTO]

thank you

[@cenkkursad6323]

Nice work, you should widen the driver area and must add a roll bar.

[@shaikhabdulmalik4680]

I will also try to make in future .please tell me the names of all the parts of the buggy .Congratulations and thank you for such a informative video

[@puridade1]

beautiful work

[@captainaleouse]

100% positive comments, sus'

[@nightwalker5278]

How cool is this? Thanks for sharing :)

[@sononobyson1184]

Mantap 👍

[@muhammadsteinberg]

For decades I've had a reoccurring thought to take on a project like this. Maybe one day...Very enlightening and informative video. Lots of steering wheel movement. Is it due to terrain, torque problems requiring frame tuning or the steering system itself? Thanks for sharing.

[@CHERALAUTO]

Thanks, because of the terrain.

[@oshpunit987]

To me, it looks like it needs a front end alignment.

[@LeonUnger]

@@oshpunit987 YES the front end is completely unaligned.

[@michaelkrause4803]

Do you have a blue print for it is so can you share it?

[@IkeTomas2010]

Cool,wonder where the rack come from. Been thinking about building a mini bike and watching a lot of this stuff. To me it'd be easier to use square tubing I think. All though I could adapt and learn to use round tubing. I don't have the tools to bend it measure the angles yet.

[@johndalessio3876]

There’s a video in the ads