you can get plastic tip cover for framing nailer often called "no mar pads" for doing siding
@simidhel6 жыл бұрын
You may not regard yourself as a professional but one thing I love about your tool series is the obvious depth of your product knowledge, highlighted by the benefit of your hands-on experience when you're explaining each tool. :) _(versus the reviews from some folk, even well known ones, where it sometimes feels like they only just learned it...)_
@LumnahAcres6 жыл бұрын
I don't like giving a review until have had some serious hands-on time. Otherwise, it's not a review!
@frameriteairdrie5784 жыл бұрын
To me, the biggest reason I got a siding/fencing gun instead of just putting shorter nails in my framing gun, is because the siding nails are a much thinner gauge which means they are less likely to split apart Hardi-Board and for fence boards it's less likely to spit the end grain open. Also, the framing guns are much more powerful. They hit with a much harder punch that could cause damage, even if the depth setting is adjusted.
@johnnybarbar74355 жыл бұрын
I chose the N75C-1 for framing, sheathing, siding and fencing. Dewalt and Bostitch have identical guns in the N66, N75 and most other versions due to being under the same corporation but the N75 can use 1-1/2" to 3" nails that are slightly heavier gauge. They both weigh the same and have removable rubber tips for siding and interior planking. The N75 excels at framing and sheathing over foam board, which requires longer nails. My old 3-1/2" strip nail framing gun weighs 12 lbs so this 5 lb'er is a pleasure to use and holds 3 times the number of nails.
@kathybluxome55145 жыл бұрын
Thank you SO much, Al, for explaining how to choose an air tool, what each are for and how to maintain them! Awesome videos!!!
@richardbohlingsr34906 жыл бұрын
Good information. 1- framing nailer, 2 - roofing nailer, 3- siding nailer, for a frame carpenter. Lots of houses use different types of siding and we used vinyl most so I put the roofing nailer first. If your a trim carpenter then the fininh nailer first and the pinner next. I did a lot of cabinet work and the narrow crown stapler works great and for soffit and fascia it works great with stainless steel staples. In reality if your going to build houses, you need them all.
@darangemaster16 жыл бұрын
you can buy a sky hook and add it to the framing nailer they also have them for the worm drive saws as well. my hitachi framing nailer has a siding foot i added on so you don't mar siding and it controls depth as well.
@1wolfpup6 жыл бұрын
This is a really good comparison and tutorial. Blessings for your family. Stay warm.
@50shadesofgreen6 жыл бұрын
Good day to you All !! Another fantastic tool time talk on the difference between framing nail gun and siding nail gun !! 👍😁🔨🔫
@lenmorris91644 жыл бұрын
I find now with the new building codes and hurricane construction I am lucky to get 2 houses out of a framing gun. With the older all metal ones I could triple that. s I even had a few older ones rebuilt and they lasted longer than a new ones.
@deborhasmith77466 жыл бұрын
Don't throw away the curtain rod holders. Use them for a surprise give away. I know I would like them, and I bet others would too. I love all of your videos. A lot of great info. Stay warm and safe this winter. Thanks for sharing.
@simidhel6 жыл бұрын
I would be tempted to turn them into little critters by adding a couple of googly eyes at the top and a red felt tongue into the gaping mouth or some-such :P
@LumnahAcres6 жыл бұрын
I never thought about that! Good to know. We might just have to do that! :)
@107retired6 жыл бұрын
Just in case Deborah failed to mention...she meant to say give away to ME!!! All set now Deborah....😉😁
@FarmFreshIB6 жыл бұрын
Really learned a lot. I have never had a nail gun. If I have that kind of project I always call my BIL who did construction professionally for years. After learning more I think I should be buying myself a brad nailer at the least.
@fooddude99216 жыл бұрын
Al - BIG thanks for making this video. I'm just getting ready to purchase some of these and this vid answered all of my questions - thanks again!
@LumnahAcres6 жыл бұрын
Glad I could help!
@LumnahAcres6 жыл бұрын
What are you building?
@fooddude99216 жыл бұрын
First up is a mobile chicken coop, later on this year a possible remodel of our walk-in closet
@gregkahle90466 жыл бұрын
Cool curtain rod holders! Nice job explaining the tools for the everyday guy or gal, keep up the good work Al!
@suesheane36716 ай бұрын
Great video! The information you've provided is awesome. Learned so much! THANKS
@lengthmuldoon5 жыл бұрын
Very useful for a newbie like me considering buying a used framer and brad gun
@BraxxJuventa6 жыл бұрын
From the looks of it, I would only buy the De Walt one. Because it's versatile enough and smaller and therefore lighter. :)
@offgridsweden6 жыл бұрын
Great video on nail guns. A really nice tool to have. Greetings from Andreas on Off Grid Sweden
@seanoreilly65514 жыл бұрын
Now I know what I have in my garage. I was wondering why a collection of nail guns. The framing gun is a monster.
@SirWilhelm462 жыл бұрын
Didn't know about these videos. Thanks, as I am wanting one of guns, and the Dewalt is what I am looking for. Saw you using in from Outdoor kitchen and onto the off grid cabin. Keep it up. Bill in WTx
@mondospark5 жыл бұрын
First let me say I proud to see yall living the American dream Will a 3 gallon compressor be enough air volume for a framing nailer Thank you for your videos
@Alex-qe2lf3 жыл бұрын
I am building a DiY vertilap fence and considering a pneumatic nail gun to fasten the panels to the 2x4 top and bottom rails. I was set to trigger on the metabo framing gun NR90AES1 for less than $200 then I learnt from your video that there is such a thing as a siding nail gun. Hitachi has a siding nail gun too but it is way too expensive for a weekend warrior like myself. If I had to buy just one nail gun for this project, would you say a framing gun is the one? Great video - informative and entertaining.
@charlesvaughn50556 жыл бұрын
great explanations on the tools. thanks have a great day
@simidhel6 жыл бұрын
It looks like you just surpassed the 18,000+ subscriber mark, so congratulations and very well deserved! :)
@LumnahAcres6 жыл бұрын
We just did Thanks!
@TheRedhawke6 жыл бұрын
Dewalt makes good stuff but I'm a Senco guy for siding and framing guns.
@keithrayeski31476 жыл бұрын
I KNEW there was a good story that went along with those wood dowels on the back of the bench!! Thanks....they are good looking rod holders! How about air compressors for the larger framing and siding guns vs., the brad nailers and staplers? Or did I miss that part? Seems the larger guns would need a larger compressor? And how about the angle differences on the framing gun? I know there are different angle degrees but I don't understand why. Great video brother....as usual!! Off to bed now....WAYYY past my bed time!!!! Tip of my hat to Gina and Miss Olivia!!
@LumnahAcres6 жыл бұрын
Last weeks video we talked about the air compressor.
@107retired6 жыл бұрын
So, the pancake compressor you have, carries enough pressure and recovers fast enough for the larger tools?
@BrianBriCurInTheOC6 жыл бұрын
Use three drops of oil BEFORE you use the tool. When the air compressor compresses air, moisture builds up in the air tank. This moisture harms the tools, the oil helps to reduce the damage.
@woodchipful6 жыл бұрын
Thanks Al !
@robotsmoke2044 жыл бұрын
If you push the safety nose back and spin that wheel by the trigger you’ll notice that it just sets the depth of the nail by adjusting the nose not the airflow. That’s on your compressor.
@RickMitchellProvenanceAndRoots6 жыл бұрын
18K! Yahoo! Keep it going! I really do appreciate your tool videos. Thanks!
@suzisaintjames6 жыл бұрын
You used the band saw when making the soil block, but you haven't talked about it yet. xoxo from Arizona
@dennisst.germaine34976 жыл бұрын
Al, you definitely are a gifted man when it comes to using tools and building projects! If you lived nearby I would definitely hire you for building projects or just consultations! Love Lumnah Acres with coffee in the Morning. Have a Blessed Day
@LumnahAcres6 жыл бұрын
Thanks!
@Underthreesuns2 жыл бұрын
Framing nailers also come with the non marring tip that slips on.
@suzisaintjames6 жыл бұрын
Those curtain rod brackets are pretty cool. If you let Olivia paint faces on them, they'd make pretty cute dolls. xoxo from sunny 🌞 Arizona
@DieselTjuv6 жыл бұрын
Great write up. I just bought a (completely different) coil gun with zero operating instructions, but this video solved all my coil gun mysteries. Thanks!
@JP-kg6wn Жыл бұрын
Good video 👍 thank you.
@evarsonazevedo53214 жыл бұрын
Can you install vinyl siding with this gun?
@pianobar78014 жыл бұрын
Great video. Thanks for posting.👍
@jc16086 жыл бұрын
Curtain rod holders , great , neeeext
@Downeastwaves6 жыл бұрын
Thank you!
@Randopic764 жыл бұрын
I know this is not a framing gun, but would it be good enough to build a small shed like a 10X10
@akrealestatebroker6 жыл бұрын
Good information. Thanks for sharing!
@evephillips67016 жыл бұрын
Very interesting video Al....Nice!
@jrmexi285 жыл бұрын
Good video...Do you have the part number for the case of the siding nail gun?
@lningzhang6655 Жыл бұрын
is it heavier when the coil nailer is fully loaded?
@eddiekytia5 жыл бұрын
Can you recommend a electric compressor that would have no problem running 2 Roofing guns or 2 framing guns if there is nothing Electric that would have the power to run them what about just one framing gun or one roofing gun and be able to do that easily thank you for your help
@atheanicholls21996 жыл бұрын
🏡🔨🔩🔧🚜🔌🐕🐓🐔🐔🐖🐖💕💕💕👍👍👍👍 enjoyed as always till the next Video God bless beautiful family bye Gina and Olivia. 👍👍👍👍👍👍👍..
@Kentucky-ev7bd4 жыл бұрын
Question - why are these guns all at an angle?
@nickmaclachlan5178 Жыл бұрын
I have one of these that I use for fencing. It's a great product and works fantastically the only complaint I have is that mine refuses to feed and fire the last 5 nails off a roll. I don't know if this is just mine or whether they all do it, but it kinda infuriates me as it's wasting my money. Only a very small amount of money for sure, but it's a waste none the less.
@parrot3404 жыл бұрын
Do u have the model number for the Dewalt plz. plz no Amazon links in the UK and cant get on US site ☹
@woodstream6137 Жыл бұрын
Can this be used for vinyl siding?
@jesseparris65075 жыл бұрын
Didn't see your Amazon link mentioned. I've got cedar shakes to install and I need a coil siding nailer.
@johnnybarbar74355 жыл бұрын
try tools-plus.com for the N66C-1 and N75C-1 guns. They have some of the best prices I've found and free shipping. If you ever might need a framing gun go with the N75C-1. It can shoot 1-1/2" to 3" nails. The N66C-1 shoots 1-1/4" to 2-1/2". Both have depth adjustment and rubber tips for delicate work. I highly recommend you use the single fire ( sequential) triggers that come with them instead of the bump fire for anything but sheathing jobs.
@Downeastwaves6 жыл бұрын
I seem to remember DeWalt sponsors SkillsUSA VICA good company.
@thecoin80425 жыл бұрын
What size of cement fiber siding nail do you need to use with a framing nailer?
@MrTkshiu6 ай бұрын
where do you get the case?
@loucifer3234 жыл бұрын
Dewalt makes a cordless roofing nailer now
@RiverPlaid5 жыл бұрын
Thank you 🌸
@historyofplacesandpeople43664 жыл бұрын
I’m looking for HART 20-Volt Cordless nail gun guys?!!!!!!! With Charger + battery 18
@MichaelJordan-hn4zd6 жыл бұрын
Is the head of the siding nail smaller than the small framing nail heads?
@ketolifestyle685 жыл бұрын
brad nailer for a fence with pine wood,.. or ?
@Downeastwaves6 жыл бұрын
Oh!! 17,999 subs!!!
@dlynnfrazier52165 жыл бұрын
Would the siding nail gun work on cedar shakes as siding? I am going to be replacing a couple of courses to redo some porch roofing, and it will be vastly easier (as you surely know) to use a nailer. Also, what sort of compressor do you use? I have a small one for my finish nailer, and I am not sure if it is good for much. (I am not at home and forget the rating.)
@LumnahAcres5 жыл бұрын
You will have to get the right nails
@jameslopez71506 жыл бұрын
Air up the nose has me laughing, nice video
@ddsbackyardcoop68146 жыл бұрын
Great video! Tfs 🐔
@R7Romeo3 жыл бұрын
I didn't know the gun came with a carrying case..
@FromThe3PointLine4 жыл бұрын
Dewalt will always have superior tools
@marktaylor36303 жыл бұрын
Siding gun is more like a roofing gun then a framing gun
@cmc71066 жыл бұрын
👍👍
@AmericaFirst1776_6 жыл бұрын
18k!!!!
@luiszaragoza37214 жыл бұрын
Xlnt video!!
@santososoriovicente60714 жыл бұрын
Ablas mucho amigo
@selador116 жыл бұрын
LOL
@mikozuna6 жыл бұрын
First!. WhooHoooo
@timedis74 жыл бұрын
Does more talking and getting to the point everybody knows what a nail gun is but get to the point of maintaining it