Рет қаралды 90,087
👉✅We build the HAMMER and I reveal the cut sheet and everything needed to build a hammer of your own. The cost of this DIY Subwoofer is around $500-550 not including the finish you choose. It hits far far above it's price point. DIY Sub Hammer for your living room or dedicated Home Theater.
For room plans, building and design consultation contact me at @
Elitehomecinema.sales@gmail.com
Check us out on Facebook
/ 474147883205616
For Flat Packs of the Hammer enclosure with or without the optional isolation platform contact
hometheatergurus.sales@gmail.com
For version 2 cut sheet look in the Home Theater Gurus community tab.
Parts
I'll put this one first as I forgot to mention it. You will see them on the next episode.
Cabinet feet.
www.amazon.com...
The undisputed Champion in it's price range Dayton UM12
amzn.to/3tIEAz4
I know the Ultimax is currently backordered and I've been asked several times about an alternative. The HO also models quite well in the hammer enclosure.
www.amazon.com...
The Amp used in the build. Other amps can be used including amps like the Behringer NX3000 with one Hammer per channel.
OPtional . amzn.to/3Q3c1nv
The screws used. Great screws with a nice clean look and a great bite. I have these in all sizes.
amzn.to/46IHFxM
PL premium. Use either the 3x or the 8x.
www.amazon.com...
Digital protractor shown in video to align table saw blade
www.amazon.com...
45 degree router bit
www.amazon.com...
1/4" straight router bit for cutting the driver hole
www.amazon.com...
1/2" Straight router bit if you need a wider cut than the above 1/4"
www.amazon.com...
If you don't like my redneck router Jig here ya go. High roller router jig!
www.amazon.com...
Here's the video I mentioned PL premium 3x vs Titebond 2 wood glue. There's plenty of others showing actual hold strength.
• Loctite PL glue vs tit...