Home Office Makeover [Part 1] | HomeWithStefani

[@vzgsxr]

Awesome work Stefani. A few little tips from a carpenter here in Australia, invest in a some longer spirit levels. You want to use a level as close as possible in length to the work piece, this will ensure the most accurate results. Also don't assume your floor is level and continue to take measurements from it, if the floor is out of level - then your finished product will be too. Instead, work out your starting height/point and then reference all your levels off that one point. A laser level is a brilliant tool for this type of work.

[@HomeWithStefani]

Thank you!! Great advice 👍

[@golddiamondsgdpc3035]

I recently got some storage shelves from a second hand store to turn into a craft cubby but i couldn’t figure out how to add a work table without it sticking out and looking “ugly”so i went to sleep to let my subconscious work it out but still nothing I hopped on KZbin this AM and ran across your office DIY and it gave me the work table I was looking for….. the shelves came in 4 tall pieces so I can add the work space to the middle of two of the shelves. You are awesome and it doesn’t cost a lot to get from Home Depot… now I can finish my craft cubby thank you for your video 🥰🥰🥰🥰

[@patriciamolony8251]

Ahhh have it many thanks love this channel

[@lulukuhn]

Omg! I love it

[@brookie.elena11]

Came across your channel tonight and I’m so glad I did. You are so handy and explain everything so well.

[@Rimkassem_]

You should do a garage makeover like a diy storage space in the garage

[@HomeWithStefani]

Good idea, maybe in the future!

[@joeheilm]

The kitchen cabinets are an oustanding idea. Cheers

[@HomeWithStefani]

Right?! Thank you for watching!

[@pamelafox7677]

Amazing work.

[@eazygfx4815]

One tip; caulk your tape and paint over it while its wet. Peel off the tape before it dries, this will assure a crisp clean sharp edge.

[@FIXMYHOMEShawn]

I like the way you making your video.

[@chrisbalducci8849]

Stefani, you mentioned a Home Designer Program, where can I get something like that.

[@yvonnezyirek5167]

This looks awesome!! On to the 2nd part!

[@HomeWithStefani]

Thank you, Yvonne!!

[@sarikapore9558]

Great project! Amazing results! Do you have carpet that you removed before you installed the cabinets?

[@muhammedsafeero]

Awesome, and Stefani, could you share about the tools that your used for this setup ... thanks

[@monicaboston8123]

I love your videos and designs. Question, can you paint the desks and shelving pieces before installing? I’m working on my skill set so I can tackle some of these advanced projects as they are way more cost effective and you get what you truly want in the end! Thanks for the great content!

[@moniquethe0G]

You're a pro. Also love your closet-looks like you had it professionally done. Great style. One question on the desk-did you finish the base cabinet sides under the desk with matching plywood to cover mdf, or were they wood already?

[@chetnash5991]

Nice job

[@stevengreene5166]

Hey The Salty Dog! Like the shirt in the previous video..

[@Stevieboy7]

So awesome! Wish you would show the process for building the cabinets themselves. Those are not easy to make!

[@JenniferWoellert]

Looks like stock cabinets from home depot

[@kaymccurry3431]

Can you tell me what color green paint you used. It's beautiful!

[@hectorcobos8879]

wow

[@dabrowskifamilyvideos757]

Is this a different house than your current house because you also have the home office you just built out the closet for?

[@raaviaishwarya752]

Can you please mention where you buy the cabinets and size you are building that would be helpful... I see even your wood you use is perfect size and I need that measurements as well and where you buy

[@loupertech]

Great video! I noticed that when you use the measuring tape you bend the end of the tape fo get your measurement. If you look at the tape casing, you should see the length of the tape casing denoted. Instead of bending the tape for your measurement, just butt the casing up to your endpoint and add the casing length to the length you see on the tape.

[@lemm1388]

Where did you get the cabinets. What did these cost?

[@thekeystonejack8445]

Stefani, what is the height of the desk in the middle? You mention the width and depth but not height. Thanks!

[@elias.a263]

EXCELENTE TRABAJO SOLO USÉ JAFAS O LENTES DE PROTECCIÓN SE LO RECOMIENDA UN TÉCNICO EN URGENCIAS MÉDICAS Y MUCHAS FELICIDADES 👍😉

[@artemarchand4842]

muito bom, parabéns!

[@tonyoaguon8683]

Nice. Just started woodworking as a hobby. 12H?

[@HomeWithStefani]

Awesome! 12W 👍

[@JessShontrelle]

New subscriber!

[@HomeWithStefani]

Yay welcome!!😍

[@davidtoney9933]

New to your channel - you are a DIY Machine! Love your videos - #newsubscriber

[@JenniferCuiPage]

Does the desk sink in the middle? I did something similar and the middle will sag when you put weight on it

[@HomeWithStefani]

Oh bummer! The desk is holding up really well but I try not to put a lot of weight on it.

[@michaelroberson2546]

2:24 "drop cloths" aka was that water or bleach that spilled on that towel?

[@cort733]

What design program do you use? And can you do a tutorial on how you use it?

[@HomeWithStefani]

I use either SketchUp, or Home Designer Suite. For the office I used the program Home 😊Designer Suite. I don't have a tutorial yet, but maybe in the future!! Thanks for watching!

[@debloui]

I’d love a tutorial too! I’m trying to decide which program to get. It looks amazing.

[@legominiman11]

Good job! Lot of paint waisted, you should have only painted middle section of wall.

[@Mrs_Dale]

👍🏻👍🏻 💖💖💖💖💖

[@ابوعبدو-ق5ف]

👍🏽👍🏽👍🏽👍🏽

[@milt7348]

Please do not use a chair as a step stool. Please, please get yourself a solid wide step stool. Ask me how I know it's a good idea.

[@فوزيعلي-ق8م]

👍❤🌹