honda 3.5 vtec solenoid (p2647 code)

[@lawrencesanchez8904]

It would help to pan in from a full frame so we can tell what side/top/bottom of the motor it's on. Because from a close up angle you can't tell. Everything looks the same.Plus if you disconnected a hose to get to it. That info would help. I think most people who look at the video are newbs. Being a newb, the hardest thing to find is location, location,, location.. Other than that the video was good.

[@RobertDickens2002]

Agreed

[@VetTrax]

Is this the top, center or bottom of the engine, which bank also

[@latafairam]

Exactly.! So annoying. Newbie!

[@blakewright7337]

Excellent! Just what I needed to know to fix the issue. You can get a new screen and gasket at your Honda Dealer.

[@RobertDickens2002]

Actually we don't know where it's at because you stay zoomed in the whole time

[@ayearetee3342]

Staring straight at your engine on the right side of the back valve cover

[@ChrisMeirose]

Oil quality will kick the P2647 in our 07 Odyssey. If my wife hits about 4500 miles (full sythetic, Wix filters) we begin to get into the range where it triggers. A quick oil change and reset and we're good, but eventually I'm going have to replace this valve assembly because the number of miles before it pops the code again is slowly decreasing.

[@Inocente530]

So it’s better just to replace the solenoid correct? Or switching the gaskets work too? Help please

[@johnhunter5699]

Thanks for the excellent video. I got P2647 code on my 2010 Honda Odyssey EX but couldn’t locate the rocker arm oil pressure switch bank 1. Do you have an idea about its location.

[@GSnip3]

Why couldn't you show how to get there? I need to know exactly where I need to open up the hood at and find it. You being right up on it is cooling on but it's not what I needed

[@luissantin2478]

Hey do you have a part number having trouble buying this

[@kimberlydrozda4260]

Hey there! I was getting 2646 code, changed the solenoid. Honda ran great for 2 days then started acting up again and I got 2647 this time. Any idea what I did wrong?

[@uglyhp8225]

did you change the oil with it ive recently found out that its a good idea to change the oil anytime your doing these solenoids and use the correct specs

[@kimberlydrozda4260]

@@uglyhp8225 I did. I’m wondering if I might have just gotten a bad part? Trying to run through all ideas before buying another

[@Travis-t8s]

you kept saying the wrong code number

[@rolysosa7777]

Made my day! 🤣🤣🤣 Don't drop the bolt and dont get covid

[@thaochou7376]

So why do 4wd pilot dont have that

[@brandonmalcom2174]

What if you already changed that part and still getting the same code

[@uglyhp8225]

then you have a different problem either blocked screen, bad oil quality, or possible break in the circuit

[@brandonmalcom2174]

@@uglyhp8225 the plug going to the solenoid wouldn't light my test light but the other one did

[@brandonmalcom2174]

@@uglyhp8225 I thought about running a jumper wire from the battery to it to see if that fixed the problem and get a new plug if it does

[@kangokidkidd4037]

Rusty....where did you get your part please 🙏

[@uglyhp8225]

ADVANCED AUTO

[@raymonddickson1414]

I changed mine now car won't start any help would work

[@nay6727]

What side of van is it..thanks

[@uglyhp8225]

driver

[@littlealex5709]

get a better angle next time

[@luissantin2478]

Hey do you have a part number having trouble buying this

[@luissantin2478]

Hey do you have a part number having trouble buying this

[@luissantin2478]

Hey do you have a part number having trouble buying this