Honda Accord Fan Replacement

In this video we replace the A/C condenser fan on the 8th Gen 2010 Honda Accord V6. It started making a lot of noise like it has a bad bearing or bushing right before reaching 100K mikes. I removed this fan just a few months ago because it has to be removed to replace the alternator on the V6 version. If it would have been making noise then I could have swapped it while I had it off already, but that is how it goes sometimes. I hope you find the video helpful and thanks for watching.
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
Link to Cheap A/C Condenser Fan if needed: amzn.to/3uQFGJr
Link to Similar 1/4" Drive Socket set if needed: amzn.to/47QMRjH
Link to Similar Plastic Rivet Kit if needed: amzn.to/41hfcNA
Link to Similar Flex Head Ratchet Wrench Set if needed: amzn.to/3RAXQIe
Anti-Corrosion Felt Washers if needed: amzn.to/45X6vcB
Brush Holder Kit if needed: amzn.to/3PJEjEz
Push Pin Rivet Kit if needed: amzn.to/3sZFU02
Belt removal tool if needed: amzn.to/45a7eWY
Cliff Quick Test Tester if needed: amzn.to/3Leff5W
Peak ESR70 Cap Tester if needed: amzn.to/44OGnPH
ProStormer Hot Air Station if needed: amzn.to/3XIiKEY
Cheap Hot Tweezer set if needed: amzn.to/3sKc8fH
Rosin Flux if needed: amzn.to/45KKWLT
Bottle for Flux if needed: amzn.to/3sv0x45
150W Load Tester if needed: amzn.to/30i8sn8
Weller 200W Iron if needed: amzn.to/30nzhT2
LiPo Voltage Monitor/Alarm if needed: amzn.to/3OxLJKy
DeWalt Cordless Gyroscopic Screwdriver if needed: amzn.to/3Eevk8f
TOMLOV DM202 MAX Microscope if needed: amzn.to/3Uy0RIF
Cheap Spot Welder Board if needed: amzn.to/3WcRwWA
JST-XH Connector kit if needed: amzn.to/3OgW1yg
200MHZ Rigol DS1202Z-E scope if needed: amzn.to/35UVTLI
Hakko 888D Iron if needed: amzn.to/36TDWyv
Conical Bent Hakko Tip if needed: amzn.to/3B57IjD
Desoldering Gun if Needed: amzn.to/2SOTVIM
Extra Long Security bits if needed: amzn.to/3KVQNGQ
0-60V 0-5A Power Supply if needed: amzn.to/4158YzL
Similar to Drok DC-DC Converter if needed: amzn.to/3eUJZYk
OFLA Locking Blade knife if needed: amzn.to/3BxMbSO
Pair of 3S 5.2Ah 60C LiPo batteries with XT-60 Connectors if needed: amzn.to/3UAl40e
GM328 if needed: amzn.to/30rBFrJ
WD-40 Contact Cleaner (Plastic Safe): amzn.to/2Yjo6e5
FlirOne USB C if needed: amzn.to/36VX1jn
Rigol DS1102E Scope if needed: amzn.to/35UVLvI
Atlas ESR-70 if needed: amzn.to/2QR1z4W
Northridge Fix Affiliate Links. Any purchase you make with below links helps support the channel. Thanks for your support!
NF AMTECH NC-559-V2 Flux 10mL if needed:
northridgefix....
NF Low Melt Solder PK of 6 sticks if needed:
northridgefix....
NF Premium Desolder Braid Wick if needed:
northridgefix....
NF Dual Head ESD Safe Hard Cleaning Brush if needed:
northridgefix....
NF Mechanic Tweezers if needed:
northridgefix....
500 Port Charging Port connectors if needed:
northridgefix....
Solder wire 100g 60/40 if needed:
northridgefix....
NF.Mini Soldering Pen if needed:
northridgefix....
NF Microscope Anti Glare Light if needed:
northridgefix....
NF.Short Voltage Injection tool if needed:
northridgefix....
NF Universal Board Holder if needed:
northridgefix....
NF Atten ST-862D Hot Air Station if needed:
northridgefix....
NF Grinding Pen with 7 tips if needed:
northridgefix....

[@stanlee922]

gr8 video!

[@brentnearhood8874]

Thanks for the links!🔗

[@brendonharp931]

Why can’t all “how to” videos be this kind of quality! Clear cut and thorough, thank you sir

[@ThriftyToolShed]

Thanks so much for your kind comment!

[@sneedsfeedandseed2]

Good video

[@jdmccorful]

Just a thought, do you think you might be able to repair/replace the old fan bearings; keep it as a spare? Looking at what you got to replace, I wouldn't put much faith in its longevity. Nice work, thanks for the look.

[@ThriftyToolShed]

Exactly, I have indeed replaced the bushing and have the old one as a spare unit in case I do need it. 👍

[@sneedsfeedandseed2]

Thank you for this splendid video