Honda Accord power steering pump reseal (teardown)

Honda Accord power steering pump reseal. The pump used for the video was out of a '97 Honda Accord LX, 2.7L V6. This video covers the tear down of the unit, as well as things to look out for while disassembling.
I've put together a revised video on the disassembly of this pump. The video series is listed below.
********Video Series********
Part 1: • Power Steering Pump Re... . **REVISED**
Part 2: • Power Steering Pump Re...
Part 3: • Power Steering Pump Re...
Help this Channel Grow: • Help This KZbin Chan...
****Automatic Transmission Videos****
Pump: • 4L60E Pump: How Does I...
PR Valve (Part 1): • 4L60E Pressure Regulat...
PR Valve (Part 2): • 4L60E Pressure Regulat...
PR Valve (Part 3): • 4L60E: PR Valve (Part ...
AFL Valve (Part 1): • 4L60E: AFL Valve (Part...
1-2 Shift Valve + Solenoid (Part 1): • 4L60E: 1-2 Shift Valve...
1-2 + 2-3 Shift Solenoid (Part 1): • 4L60E Shift Solenoid -...
Planetary Gearset: • Planetary Gearset - Ho...
Power Flow (OD Gears): • 4L60E Power Flow (1st,...
Power Flow: (Manual Gears): • 4L60E Power Flow - Man...
Teardown: • 4L60E Rebuild: Teardow...
Teardown Time-Lapse: • 4L60E Teardown (TimeLa...
Output Shaft Swap (2WD to 4WD Conversion): • 4L60E Output Shaft Swa...
RESOURCES:
1) Safety-Wear: 😷
A) Comfortable Safety Glasses (3M):
amzn.to/2JguhZN
B) Great Work Boots (Ariat): 👟
amzn.to/2GD9eP7
C) Awesome Nitrile Gloves: 🧤
amzn.to/2Y6XwSN
3) Power Steering Tools: 🔧
Craftsman 230-Piece Tool Set: amzn.to/2L0AtWv
Snap Ring Plier Set (Pump Circlip Snap Rings): amzn.to/2IUxpdu
Palmgren 3-Ton Arbor Press (12 inch working height): amzn.to/2Reqmyx
5) Power Steering Parts: 🔩
Reseal Kit: amzn.to/2EriR25
Note: Be sure to verify that this kit will work with your vehicle. This can be done on Amazon...upper left side of the website.
6) Shop Supplies: ✏️
Assemblee Goo (LubeGard): amzn.to/2WrN7nT
Thread Locker (Permatex) (Blue): amzn.to/2YLtmFk
Brake Parts Cleaner (3M): amzn.to/2HxQ1Pz
MY FILM GEAR: **Some substitutes are used**
🎥 Camera: amzn.to/2TZWhEg (paid link) **Features numerous settings geared for video recording**
🔭 Lens:
A) Canon EF 50mm f/1.8 STM Lens: amzn.to/2NtJKaY (paid link) **My favorite, and most-used, lens**
B) Canon EF-S 24mm f/2.8 STM Lens: amzn.to/2ZpZwWz (paid link)
C) Canon 18-135mm Zoom: amzn.to/2HjvrSv (paid link)
🛤 Camera Slider: amzn.to/2ZnefSh (paid link) **Great for a one-man crew. Use for video & time-lapse**
🔺 Tripod: amzn.to/320LU5L (paid link) **I highly recommend this. Strong and tall**
💡 Lighting: amzn.to/33XhWS9 (paid link) **If you can afford it, get a light that offers "bi-color"**
Light Diffusion: amzn.to/2zkVvbn (paid link) **Do not overlook diffusion. It's affordable and a must-have**
🎤 Microphone: amzn.to/2Zc2LWt (paid link) **Built-in camera mics are terrible...trust me**
💻 Video Editing Computer: amzn.to/2ZlNrSt (paid link) **Ask for more VRAM for better editing performance**
Recommended Upgraded: amzn.to/3arFiRQ (paid link)
🎬 Video Editing Software: amzn.to/2Zq2YVl (paid link) **Tons of online support for this software**
MY WISH LIST:
🎥 Camera: amzn.to/2VOMF0y
🔭 Lens: amzn.to/2XXgu1x
DISCLOSURE: 🕵
Links provided are affiliated links with the associated websites. While there is no extra cost to the purchaser, a small portion of the sale goes to support this KZbin channel.

[@SouthpawAutoworks]

Thank you for being here! If it feels right to you, help me spread the word about this channel… 1 Handed Transmission Rebuilder (60 sec): kzbin.info/www/bejne/kIKrpaWMe7p7ms0

[@blackericdenice]

Dude, I love your video and I just rebuild my 1st. PSP on my sister 96 accord. Got the kit off Ebay for $13 free ship.1 thing was different. The pump ring had 2 dots facing the cover and I put it back that way. It working just fine and she can't believe I fixed it for $26. ($13 for snap rings tool) A mechanic told her $250.

[@SouthpawAutoworks]

***** This is what is so great about posting these videos. It empowers all of us who watch and learn. It's an awesome free tool.

[@Konzine]

This saved me. Thanks man! Also you did this considerably faster with 1 less hand.... Soo thanks for that!

[@SouthpawAutoworks]

Konzine A reseal job that's so easy, a guy with one hand can do it. ;)

[@Konzine]

+guitargube a year later and still replying to comments.. you're awesome. also I've rebuilt 3 of these this year and rebuilt my h22 from the ground up. Your video was my first ever messing with a car so you gave me the confidence to move forward. Sorry for rambling just know you inspired some guy to work on his own rig.

[@SouthpawAutoworks]

Konzine Dude, this is awesome!!! Mission accomplished. *sigh* Thank you.

[@SouthpawAutoworks]

guitargube Post some pics of your builds on your KZbin profile, as I'd like to see what you've been doing.

[@robertkochou5412]

This is how to make a Good repair video ,thank you man.

[@SouthpawAutoworks]

Thank you for the comment. I updated this video with a new one. If you have time, check it out. Thanks. kzbin.info/www/bejne/l4KTn5KvpZabh5Y

[@LongNguyen-mu7bb]

Thank you .

[@SouthpawAutoworks]

Long Nguyen You're welcome. Thanks for the comment.

[@whisper7373]

Thanks for sharing. I was going to attempt this myself, but think I'll leave it to the pro's!!

[@SouthpawAutoworks]

Thanks for watching, and commenting.

[@DavidLish]

This is a fantastic video thanks! I imagine if you have not posted video 2 at this point you will not be planning to at this point? Keep up the great work!

[@SouthpawAutoworks]

David Lish thanks for the comment. Part 2 is in the works, right now. If you haven't done so already, hit the notification bell, so you will be automatically notified of the new video.

[@SouthpawAutoworks]

It took longer than expected, but the series did get completed. Actually revamped the whole thing, for a better viewing experience. kzbin.info/aero/PLMK9OC5NGhbgubxA0x4rsky_Ivv3AJ_ay

[@importadoraeferre9978]

Very helpful and illustrative, thanks a lot man.

[@SouthpawAutoworks]

Thank you for the comment Importadora Eferre.

[@joejoe188]

very detailed! Thx so much!!!

[@SouthpawAutoworks]

Thank you for the comment Joe Joe.

[@Scientwisted]

This pump is for the 4 Cyl model accord, the V6 pump is mirrored (backwards). Both pumps for the V6 and 4 Cyl are basically identical inside and if you pay EXTREMELY close attention parts can be interchanged, but only a few. (vanes, center rotor, springs, pressure relief valve) And only on model years 94 through 97 as the design was heavily changed.

[@SouthpawAutoworks]

Right on! Might have to make a trip to the junk yard to pick up some other model years. Thanks for dropping me a line!

[@Scientwisted]

@@SouthpawAutoworks You're very welcome.

[@amatureskater15]

likely....90-97 are all the same. just fyi

[@mauricio9019]

excellent video friend👍. Greetings from Argentina

[@SouthpawAutoworks]

Thanks. Currently working on part 2. Better lights, better camera, etc. Stay tuned...

[@zakiboy4505]

Thanks very much brother

[@SouthpawAutoworks]

Thank you for the comment.

[@OldIsGold4U777]

Thanks

[@SouthpawAutoworks]

Ranjit Singh you're welcome. Thanks for the comment.

[@hectorcardenas6616]

Great job!

[@SouthpawAutoworks]

Thank you for the comment.

[@SouthpawAutoworks]

Hello everyone, thank you for your patience. I'm still new to posting videos on here. Honestly, I do not realize that anyone had posted any comments, until just now. Been away from this for quite a while. Too many distractions. =/ At any rate, I'm going to post "part 2" soon. In the mean time, I have posted a new automatic transmission video. You are welcome to check that out. Take care.

[@ANIMATIONSYTBB]

Very good

[@SouthpawAutoworks]

Thank you.

[@WorseThanChiggers]

Great part 1! When can we expect part 2?

[@SouthpawAutoworks]

Part 2 is still in the works....5 yrs later. ***Shaking my head***

[@gbengaakindele1851]

Hi, I've watched all your four videos on pump rebuild and they are very amazing. Especially the honest advice and encouragement you gave in the last video. I however want to ask, what are the expected damages I should expect if the pressure of my pump has reduced? Thanks.

[@SouthpawAutoworks]

Thank you for watching, and for dropping me a line. Much appreciated. That's a hard one for name to answer, as it could be number of things (vanes and cam ring wore out, internal seals hardened and causing internal leakage, worn out flow control valve, contaminated flow control valve, etc). Your best bet is to tear it down and conduct a thorough examination of all parts. Look for signs of wear on metal parts. Look for rubber seals that are no longer soft. The proof is somewhere in there...waiting to be discovered. I was hoping to answer your question in a more direct manner...but, I gotta be honest. Can't know for sure, without taking a look inside of the unit.

[@gbengaakindele1851]

@@SouthpawAutoworks You've actually answered my question and for that I'm grateful. I noticed some leak in one of the pressure hose. I just changed it and tried to pump out almost all the oil in the whole line. I put fresh oil, not expecting to see much difference but lo and behold, there was a big improvement in the steering system. It occurred to me that, I might have some air trapped or oil clogged in my system before. Thanks so much because I wouldn't have gone that far if not for your video.

[@SouthpawAutoworks]

Right on!

[@marvinarchila6060]

muy buen video

[@SouthpawAutoworks]

Thank you marvin archila.

[@tonys9731]

You're amazing.

[@SouthpawAutoworks]

Tony S thank you for the positive comment.

[@TheTheCrewing]

this video saved me 600 over

[@SouthpawAutoworks]

Right on! David Bronshtein thank you for your comment.

[@rayoostoo]

nice vid, thank you.

[@SouthpawAutoworks]

Thank you for the comment.

[@vfr661]

Not sure why the pump slide on your ps shows the one dot on facing out when the service manual states the opposite. The two dots face out. I installed per your instructions and it was hard to steer the steering wheel.

[@SouthpawAutoworks]

I'm really bummed to hear that. However, I really appreciate you bringing it to my attention. I updated this video with a brand new one. kzbin.info/www/bejne/l4KTn5KvpZabh5Y

[@axenz1]

Thanks for the video... btw where is the part 2 ?

[@SouthpawAutoworks]

Thank you for the comment. Part 2 is still in the works....5 yrs later. ***Shaking my head***

[@cck1496]

Excellent video. At 1:20 of the video, what valve is that, I mean, relief valve etc? Thanks for your excellent work.

[@SouthpawAutoworks]

It's called the Sub-Valve. I created an updated video. It's night-and-day better than this one. Here's a link to it. kzbin.info/www/bejne/l4KTn5KvpZabh5Y

[@cck1496]

@@SouthpawAutoworks Thanks for your prompt reply. Keep it up.

[@SouthpawAutoworks]

Appreciate you being here.

[@eaglehigh-h3e]

hi bro, you said the witness marks are on the left of the vanes in this video. In your other part 1 video, you showed it's on the right. I am confused now. Which one should I follow?

[@SouthpawAutoworks]

The only way to know for sure is to make note of the orientation of the vanes prior to disassembling this part of the pump. I recall you mentioned that "all the vanes fell off from the rotor by accident." What a bummer... Unfortunately, I can't say one way or the other on these vanes.

[@eaglehigh-h3e]

@@SouthpawAutoworks Roger that. thank you bro

[@cristianroca2868]

Hola soy de Chile quería saber si tienes el manual de reparación del honda accord 1996 v6 2.7l nesecito mucha información del motor y su armado, etc.. Se lo agradecería que nos pongamos en contacto en algún correo por si lo tiene en pdf o formato digital o en fotos, gracias!!!

[@SouthpawAutoworks]

Lamentablemente, no tengo esos materiales

[@TheTheCrewing]

great video but unable to find 2 part. thx guitargube

[@SouthpawAutoworks]

I have filmed part 2....just haven't had time to edit it, and post it. It's in the works.

[@TheTheCrewing]

THx

[@andrescanales7383]

De nada 4 44558

[@SouthpawAutoworks]

Thanks for dropping me a line, Andres Canales. PS If you're, by chance, interested in learning about automatic transmissions...that's our primary focus with this channel. 1 Handed Automatic Transmission Builder: kzbin.info/www/bejne/r2S5mquXlKqWZ6c

[@juanperezmireles9963]

Traductor

[@blackericdenice]

Talk louder next time.

[@SouthpawAutoworks]

Hey man, I really appreciate your comment/feedback. I posted a revised version of this video. Would love to hear your thoughts. Here's the link: kzbin.info/www/bejne/l4KTn5KvpZabh5Y