Honda CBR 600 RR fork seal replacement Howto

A little howto on fork sleals replacement for a honda cbr 600 RR 2003-2004.
I am no expert, this is how i did mine and worked out fine.
Tools for the job:
Gloves
Towels
Oil catcher / container
new seals
new dust covers
8mm hexagon LONG
2x 14mm wrench
24mm wrench or socket
pliers
vice can be usefull

[@22veteranflyfishing]

Love the video I will be doing mine forks next weekend. I'm getting the tools and stuff I need to do it with. I do love the tape trick.

[@donnieflame]

How hard was it? Gotta do it on my buddies bike

[@user-jh8pi6yi4c]

About to do mine. Let the fun begin ! Cheers

[@strich765]

Its fun :)

[@DK-nv9zu]

This was so helpful, thank you!

[@mihaipitu9172]

Awesome,thank you, help a lot!

[@pepegrillox249]

Just what i needed, gotta change my seals tomorrow lol, do we have to torque the last bolt ? Once we put it all back together or is it just tightened enough ? Also great video this view was the one i needed personally !

[@strich765]

The blue cap? Needs to be torqued, one extra tip, the slider bushes need to be installed with electrical tape trick before the seals!

[@PuraLeche6942]

Do i need to buy seals and what kind of oil it needs. Thank in going to do mine this weekend. 🎉🎉😂

[@strich765]

Yes, you need to buy seals. Also fork oil specified in your manual. Or oil depending on your riding style

[@its_me-o7o]

Ik heb helaas ook een lekkende/zwetende keerring.. Dus dit is een hele mooi Tut. Thnx.. Motor staat alleen op een krik?

[@strich765]

Ik heb hem in een takel hangen, er moet officieel meer dan 0,5 per vork in en de onderste inbusbout moet nog geloctite worden

[@user-jy9wg5fr9m]

Done this as well... but im stuck at the place where i insert the rod and tight the bolt down at the bottom. The rod spins in the tube... manual says that is okay and you can tighten it later. Next step is filling the oil and it starts leaking from the bolt on the bottom... I tried to hold the rod and get the bolt as far as possible in for 5 minutes straight.... what to do,...

[@strich765]

Try removing the rod, and try to just screw the bolt in, maybe the threads are screwed up.

[@strich765]

They also need to be aligned correct

[@Gabriel-wu1wt]

hey man, where did you get that manual from? I'm looking for one for the CBR 500R and I'm having trouble finding one online.

[@strich765]

Hiho, you can try a search on carlsalter google it!

[@Doubledeepfried]

Phew, Ik ga hem toch maar naar een werkplaats brengen 😅

[@strich765]

Kom maar langs :)

[@Doubledeepfried]

Als mede 765rs en cbr600rr eigenaar zou dat helemaal niet verkeerd zijn. Maar volgens mij woon je noordelijk?

[@strich765]

@@Doubledeepfried Nee, noord brabant