Honda civic hub and wheel bearing replacement

[@meaganhope6213]

Yesssss finally someone who doesn't talk endlessly about dumb shit, thank you sir for just getting right to the point....🤩

[@carlosLopez-ku2jd]

this guy ....wow he doest talk much,.but he know what he is doing.. i will give him a 10..he deserves 10... very good guy... you are the best...ive learned a lot from you... thank you much...

[@italosuarez8641]

Excellent job, congrats 👏 🙌 👍 😀

[@shaam32]

very informative and useful . Thanks

[@dillonbledsoe7680]

Nervous when ur under the car without a jack stand 😐

[@jiehao5021]

Thanks for the detail

[@eliazarjimenezc5546]

E visto muchos videos de los profesionales ellos no le ponen grasa en el bearing yo le doy un 6 de calificasion

[@tonistarks2874]

Great video broski😎👍🏼...detailed and to the point.bery clean video

[@mikethompson3534]

Ensure bearing is pressed in correct side as for the anti lock brakes one side is magnetic

[@junnlee8102]

I'm thinking of doing this. Kind of nervous. I'm no mechanic

[@yandel11210]

Great job

[@peterpirog3089]

Great video

[@balasubramanianp6956]

It looks good.... But can you tell whats the bearing number for honda civic 1.8V 8th gen 2007 model?

[@Doomzdayxx]

Holy shit. Like the easiest bearing retaining ring ever to remove. mine is completely rusted/welded to the spindle

[@avpautomotive6337]

The advantage of California weather, where do you live?

[@Doomzdayxx]

@@avpautomotive6337 haha no doubt, paradise weather! Yeah I live in Ohio. It gets worse as you move up north of course.

[@martinsemrok]

Thanks for mentioning "magnetic side of bearing". Is this for the ABS sensor?

[@avpautomotive6337]

Yes, its for the ABS sensor.

[@farid7968]

hi AVP automotive! thanks for your vid! my questions: 1/ where did you get that piece of metal that you used with the press to insert your ball bearing into the hub? 2/ what is the reference of your Milwaukee torque impact wrench (is it a 18, a 20 a 12 volt? wht is the working torque? wht is the peak torque? how long does it last before changing battery?) i need one before doing my clutch but do not know which torque impact wrench to buy? obviously the more expensive kit is good but do not have the money, need one handy not that expensive but not the first price with bad torque! THANKS FOR YOUR TIME Farid :-]

[@avpautomotive6337]

Hello, I am using bearing pressing kit M21-1 from Harbor freight. The impact is the Milwaukee Fuel M18, 1400 ft-lbs of nut-busting torque and 1000 ft-lbs of fastening torque.

[@martinsemrok]

Excellent presentation! Well photographed and precise. Did you mean "Loctite" on brake caliper bolts (or silicone in the caption)?

[@avpautomotive6337]

I use silicone on the caliper bolts so it doesn't come loose with the vibration. I don't use loctite because silicone is more practical to me. Can also use a little bit of spray paint.

[@1981shaw]

When pressing the hub back in are you supporting the bearing on the back side to keep the center of the bearing from pushing out or just supporting the hub assembly

[@avpautomotive6337]

Supporting the hub, but I put a stopper where I want the bearing to stop. This way I don't press the bearing pass the speed sensor.

[@samuelponce6066]

I'd only everyone had a press like that I need to do mine soon I know how to do it but $300 for the tool itself it's horrible

[@avpautomotive6337]

Press is $169 at harbor freight, that is as much as paying for someone to do it for you.

[@Alex1997626]

How far in did you press the bearing? Just until it reaches so the hole stays open for the ABS sensor?

[@avpautomotive6337]

Yes

[@martinsemrok]

How long did the actual repair take in real time?

[@avpautomotive6337]

It took me about one one hour.

[@italosuarez8641]

I ❤ love milwaukee

[@avpautomotive6337]

I feel the same way, makes every job easier.

[@italosuarez8641]

@@avpautomotive6337 you rigth.

[@FD-rh6tr]

The slide hammer couldn't take the hub off so I now have to buy the damn press smh. $140 but its whatever.

[@avpautomotive6337]

Yeah I had tried slide hammer from autozone before and couldn't take it out.

[@paulbiado9014]

Will this affect the alignment of the car?

[@avpautomotive6337]

Yes, this will affect the alignment of the car because the knuckle is being remove. You would have to mark the position of the bolts and put it back at the same location to keep it somewhat aligned.

[@luis7164]

Why is he replacing the wheel hub? Doing the bearing is ok.

[@avpautomotive6337]

Personal preference, if i am already there why not replace it.

[@sopretty43vr]

bro if i buy a moog hub assembly do i still have to press?

[@avpautomotive6337]

Yes, still has to be press.

[@MaxMax-fb5dv]

Where did you buy the round plates/spacers?

[@avpautomotive6337]

Harbor freight

[@MaxMax-fb5dv]

what is the part numer from harbor freight?

[@avpautomotive6337]

@@MaxMax-fb5dv MC21-1

[@toy4tao]

what if i only want to remove the hub?

[@avpautomotive6337]

Rent the hub remover from autozone, no need to remove the knuckle. Move knuckle to the side, take the axle out of the knuckle and use the hub remover.

[@toy4tao]

@@avpautomotive6337 nvm took it to the shop instead :/ -$300

[@meaganhope6213]

How long would you say this took you?

[@avpautomotive6337]

About an hour.

[@Thendwill]

What year is the car?

[@avpautomotive6337]

2007

[@Evoque09]

are you near a formula 1 track? :)

[@avpautomotive6337]

Lol, its the freeway.