Honda Clutch Master & Slave Cylinder Replacement + Braided Line + How to Bleed a Clutch!!!

[@leetos.4915]

This is the only clutch tutorial i found the most detailed and helpful for DIY educational purposes…now I have confidence to work on my 2013 Honda accord MT…props to this Man aka Jason Statham! ❤💪👏🏻👍

[@hondaresource]

Thank you

[@myeyes7501]

5th gen owner, saved a some hard earned money buying a master cylinder and following your guide a lil while ago, back at the slave today again to grease the pivot and once again watching the vid! appreciate it, ludes need the love!

[@hondaresource]

I wish I had more come through the shop

[@realtimez597]

Such a well detailed video! Thank you very much, doesn’t get any better then this. To bad all videos weren’t like this one

[@hondaresource]

Glad you liked it!

[@jacoblowder6270]

Thank you for making this tutorial, great instruction and quality! I will need to do this on my Honda Civic this week.

[@hondaresource]

Essentially same process for the Civic

[@gabrielheard2287]

Just used this to replace the master and slave cylinder for my prelude, thanks!

[@hondaresource]

Heck yeah man!

[@gabrielheard2287]

@@hondaresource Works perfectly, unfortunately the heat gasket just blew this morning, so I’m gonna be having more fun later on this week replacing it and a whole bunch of other seals

[@zackj272]

Honestly I cannot thank you enough! You have making this video has helped me in a jam beyond belief and giving me a genuine idea of how to go about things. Now I just gotta go do it. Again thank you so much

[@hondaresource]

You can do it man

[@haleybug1682]

Thanks a lot. I just changed my clutch out and I’m about to do the master and slave cylinder. Ur video helped.

[@hondaresource]

heck yeah!

[@AtharianMithra]

Thank you for this. I own aa 5th gen and my clutch lost pressure after letting it sit this past winter for 2-3 months. I needed to bleed the clutch and was looking for a DIY on the 5th gen. You came in clutch! (Pun intended)

[@hondaresource]

😬🤟

[@99BravoZulu]

Thank you for the video! Used it as a step By step guide to do the exact same thing and everything went smooth.

[@hondaresource]

Heck yeah! That's great man!

[@itsMBWAAA]

Prelude gang 🤘🏻🤘🏻

[@FiddyAutomotive]

hey man thank u for the video and explaining everything and showing everything. i got a 2000 prelude im building and getting ready for when i turn 16 and my master is bad. imma order the parts and fix it myself. thank u for saving me some money

[@FiddyAutomotive]

update i got the master installed and bled but it’s still the same lol now time to the slave ig

[@FiddyAutomotive]

update i installed the slave and still nothing lol time for a new line😂

[@hondaresource]

You got this man, process of elimination

[@FiddyAutomotive]

@@hondaresource yessir i rlly hope it’s the line lol i just want my 3rd petal back😂

[@damo1140]

WOW bro, mechanics over here in oz want to charge me $800au just for the slave cylinder in my Honda CRV 01. They rekon its 6hrs work at $100 an hour. looks like u did all that within 2hrs. Your awesome bro n ty for this vid

[@samgreenwood9617]

damn this vid saved me some money ty man

[@hondaresource]

Hell yeah! Awesome man!

[@stivkrunic8612]

nice job 👍

[@leechungpewching]

thank you for the vid. im just waiting on my green valex line to show up and ill get to work

[@hondaresource]

Heck yeah 🤟

[@hondaresource]

@@malakaibraylon669 no one cares

[@jayconte5718]

how long does it take for the shipping in united states area

[@fishboi8050]

I can’t properly put in my slave cylinder because that clutch fork won’t move so I can’t line up the slave cylinder to bolt on. Do you know what could be the issue?

[@michelesmith458]

did you get the C E L to go out?

[@timbarbknecht659]

Great video, appreciate the help!

[@hondaresource]

Glad to help!

[@The1972Cutlass]

Hey jus changed out my clutch cylinder on my 1997 Honda prelude but it still stuck in gear , didn't change the master cylinder since I couldn't find any leaks , any suggestions on what else could it be , the clutch shifter is stuck in 4th gear

[@MrDomsTask]

is the braided clutch also apply on civic es 2001?

[@hondaresource]

Yes, not the fitting size for the master cylinder is different

[@keithjose4579]

im currently doing this to my 97 Honda Prelude, I was told a Ktuned B series clutch line would work too, but now that im in the middle of it, it does not have the same fitting from the clutch line to slave, any chance u know what the correct fitting i need would be? awesome video, very helpful

[@hondaresource]

I think it's m10x1.0 to -3an most braided clutch lines are -3an

[@keithjose4579]

Yaa but its an inverted flare, so hard to find it, i know the one from the master is a 12mm and the slave is a 10mm, but to find the correct one for both sides seems so impossible@@hondaresource

[@hondaresource]

@@keithjose4579 I just bought this car today. I can pull it off this week and tell you for sure

[@keithjose4579]

Awesome, thaaannk youuu@@hondaresource

[@francobonaparte]

That mic is fire

[@tsztungchau2294]

Very nice how-to video!! But did you bypass the clutch damper? How does it feel?

[@hondaresource]

This felt just like every other Honda 🤣

[@caseyscarberry3447]

Help, I have an 05 Civic si. I replaced my master and slave about a year ago, but not my line. I believe it's in the process of deteriorating. My fluid is black with chunks. Needless to say i have very little clutch pedal. I also used luk brand cylinders. I was hoping someone knew of the fittings that I should use to convert to 3AN. And where i can purchase a braided teflon coated line.

[@hondaresource]

you should be able to find a replacement setup for anywhere like chasebays, hybrid, ebay, etc. The fittings and hose would be the same for any civic with k swap. EG/EK/DC/EP3/DC5/FG2/FA5

[@HardKnocks160s]

Would this kit work for my f23a in my 2001 honda accord manual?

[@hondaresource]

It should.

[@Rumplemctumblebum]

Man thanks for this. Ive noticed that I've had to refill my clutch fluid far too much and this afternoon after work noticed what I thought was water on my floorboard... Nope. Brake fluid. Is there anyway you can post part number on the parts you used? Thanks in advance. Great video!

[@hondaresource]

I'll post them tonight when I get to work

[@hondaresource]

www.ebay.com/itm/Master-to-Slave-Cylinder-Complete-Clutch-Line-1992-2001-Honda-Prelude/361378936082?fits=Model%3APrelude%7CMake%3AHonda&hash=item5423dcf512:g:hSUAAOSwHlhfOpU9

[@dipster14]

Brooooo ....the gnats are crazy where u at bud!

[@hondaresource]

They are terrible!

[@hondaresource]

I'm in West Blocton AL

[@jamesstewart1794]

Does the pat on the butt help with the reinstall step ? I know those 2 nuts are a pain in the ass to get to tho.

[@hondaresource]

absolutely lol

[@ericlindsey1708]

Great tutorial! I'm converting the hard line to steel braided on my Civic along with new master & slave and this will be my go to reference video 👍. Also, I ordered some extra Russell AN conversion fittings and the new ss line also came with a banjo bolt. I test fitted it all and it looks like it'll all fit. To your knowledge, is there any advantage/disadvantage to using the banjo bolt style like your calipers...vs just straight threaded style? I can run it both ways no problem but was just curious.

[@hondaresource]

I've done it both ways, both yielded the same results

[@BubblesAdventures17]

Will this work on a 92 Honda prelude ?

[@hondaresource]

if it's hydraulic clutch, then yes

[@nathanyoung9123]

I replaced the slave cylinder and kept the old master cylinder, it had pressure now it completely has none, now the device that pushes the slave piston isn’t moving anymore why is that? Please help!!!

[@hondaresource]

I'm confused. what are you talking about pushes the slave piston? It sounds like you need a new master cylinder and to bleed the system. The master cylinder provides fluid to the slave to move the piston.

[@elhatch2503]

I added a new clutch hydraulic line and master cylinder and when i bleed it the clutch still stays down and wont go up. What am i doing wrong?

[@hondaresource]

Open the bleeder screw, Pump the pedal by hand 5-10 times, leave pedal in down position, close bleeder screw, lift pedal by hand, check fluid. You should be good to go

[@balloney2175]

Where did you buy that braided clutch line?

[@hondaresource]

Ebay

[@masternaze1025]

If Jason Statham was a mechanic

[@hondaresource]

rofl

[@Logan-Whatsittoya]

The 2 dislikes are the people who wanted to smack his butt too and are jealous.

[@hondaresource]

hahahaha

[@Logan-Whatsittoya]

@@hondaresource glad you liked that haha gonna be replacing my Slave Cyl. Today I lost my clutch on my imported 95 Si saddly popped the hood and there was a big puddle of brake fluid under my slave so problem child was found lol. Got the parts yesterday so will be replacing shortly wish me luck! Didn't seem to bad from what I seen in your video!

[@hondaresource]

@@Logan-Whatsittoya definitely an easy job

[@francobonaparte]

😂😂😂