Honda Cr 125 Dirt Bike NEW Parts Installed!!!

[@2vintage]

Hey guys Hope you are enjoying the 1990 Honda Cr 125 Build!!! Please SUBSCRIBE and LIKE the video if you have not already! It helps me out a lot! Check out www.Laptwo.com for motorcycle, dirt bike, ATV, and scooter parts! Instagram: 2_vintage_

[@user-lx1zg2qo3c]

Can't wait to hear it run

[@richardmccracken9180]

Oh yeah definitely and cannot wait for next video on this bike

[@zackcalfee4844]

That exhaust is why the rings was stuck and gaulded on the piston lol love the videos bro, when I seen you put that gocart engine (650) back together and time it and etc. I gained so much respect for u. #youarelearning

[@2vintage]

Also I made a mistake in the video. The 1990 Honda cr 125 has an exhaust bridge on the cylinder. This means that the piston needs to be drilled out with two small holes going vertical along the piston where the exhaust bridge would be. I do this step next video! I did not skip over it! Just wanted to clarify before people start to comment about it!

[@jorenayer7724]

2vintage I was about to comment about that lol

[@bryansalgado87]

I was about to comment about that as well brought it up in a comment in last video

[@mikelwmc]

Make sure to measure the ring end gap also.

[@AUSTIN_457]

Good job on the bike so far. Idk if it was mentioned in the video but I would sand the cylinder head down a bit just to make sure everything is even and it's not warped. If it is warped all this work will be for nothing! Looking forward to the next video

[@wd-40everything65]

@bryan salgado Your right Bryan very good tip bud!

[@Mr410sg]

I bought a 1997 cr125 and I’m doing a full rebuild on it, I enjoy your channel and content.

[@jthalbig6505]

I like how you guys are working on the engine’s

[@raywalsh5822]

check ring gap of new piston in the cylinder before fitting

[@bikefixbuilds2139]

Who else goes to the comments first?

[@hoopkoop2083]

Yessir

[@trtagar723]

Ulike Atv unfortunately yes

[@allonpets3327]

Oof

[@wd-40everything65]

That is why so many leave comments that don't make sense! Because They Didn't Watch The Damn Video!!!! 🤔🤔

[@lolzu7797]

@@wd-40everything65 or they just know about engines unlike him

[@Cavem9n]

Hey Joe, I just repacked my silencer on my sx 125, and put in a uni air filter with thinner oil, the thing added so much hp I feel like I’m on a 150! They are suck cheap add ons and are so helpful for low en torque and power! You should try it!

[@zook_291]

Working on my 98 CR125 for this year’s race season.

[@wheelietime_]

Cant wait for that thing to be ready

[@gtisid]

exact same thing happened to a wiseco i purchased from ebay, lunk head DHL driver dropped it over my fence onto concrete. chipped the piston skirt . i did get a full refund from the seller though. But you really have to blame the sellers for inadequate packaging on such a precision part.

[@MootzLifeJourney]

Great progress on the Cr125! I was just suggesting to maybe do a video on a Yamaha Raptor. Thanks!

[@dylisa]

Slammed that like button love these videos bike is coming along nice can't wait to see how that super buggy turns out

[@jasonwildey9362]

Loving that you and chuck are working together again, would be ace for you to get a trx 400ex or a raptor 700 also a ktm 380sx. Love the videos keep up the great work and videos guys from jase in the UK

[@scottskipper1823]

this is so awesome im rebuilding my 1990 cr125r currently

[@yinz_fishin3002]

Had the same bike, those cr’s had balls and pulled hard ✊🏼💨

[@Ethan-Martinez2003]

Love your vids, learn a lot from them👌

[@juliandick3766]

I realy enjoy watching your videos. Greets from Germany

[@kylewallace2650]

Cant wait to see this thing rip ..and as for the reeds i highly suggest the carbon fiber v force reeds..i use em on my rm 125..they r a littlr pricey but the power u get from them is worth it

[@Junior-fd8ux]

Kyle Wallace good call v force reed cages def ad some to these bikes. I run boyesen rad valves with there carbon reeds on everything an its worth the buck 50. That with a pipe an silencer goes a long way

[@rowangrayvlogs5355]

Cr content is my favourite content

[@phillmitchelllpool2092]

Can't wait for the next video should be up and running 👍🏻👍🏻👍🏻👍🏻🤞🏻🤞🏻🤞🏻🤞🏻🤞🏻🤞🏻

[@rigguyjt]

Usually when I have the right side cover off, I take a couple more steps and change right side crank seal. I know I sound like a broken record but it could be part of the reason for lack of oil in the gearbox.

[@wd-40everything65]

Lucky on this model you can change that seal without splitting the case. Some models the cases have to be split.

[@yeedos61]

Another great video guys.......Jesus I would of struggled with that piston not being perfect.You paid $109,I would of demanded a replacement.Anyway asever you produced a great video,till next time !-Chris

[@danthedirtbikeman4274]

I just woke up and now watching this

[@smallenginekid6252]

I use the handle bars as a leverage bar too!!!

[@jorenayer7724]

I’m so glad that the engine was savable, and i remember you saying that you got the bike for $600 last vid. Did you get 100 off for taking the worse exhaust?

[@alexkirchoffner9749]

Where did you get those plastic

[@WheelieFreak]

Whats up with the flip flops all the time? is that Brasil or what?

[@kylecamsel5227]

I'm new to your channel. New to dirt bikes. Do you dirt bike have racing headers???

[@thelifeofyoungmatt8274]

I bought a cr85 it wont start has little compression and also when i try to kickstart some type of fluid comes spitting out by the head and beginning of exhaust pipe?any recommendations what could be wrong?

[@aitosuomalainen7283]

Uuuh, have you guys still got any packing for your cr 85, because it REALLY would need some new packing in the silencer...

[@2vintage]

Yeah just repacked it today!

[@jamesbanks9573]

Can you jam the power valves open constantly so it's faster all the time ?

[@Cavem9n]

James Banks would bog insanely, not sure that’s a good idea, might not even be able to not not stall it if ya l kw what I mean

[@wd-40everything65]

The Honda engineers would like to have a serious talk with you son!

[@jamesbanks9573]

@@Cavem9n yeah true but alot of people used to do it to the yamaha dtr 125s and a think they seemed fine

[@jamesbanks9573]

@@wd-40everything65 ha ha why is that

[@wd-40everything65]

Your bastardizing their design!

[@wyattsmith3044]

I bought parts for my scrambler 500 and they sent the parts back when they got to my area didn’t get my parts for 2 months the carona is really messing with people who ride

[@954ethan3]

Corona is messing with everyone genius

[@ryanhill97]

Hi I love the vids!

[@supersparks4742]

You should put newer plastics on it too like the front

[@divergent2619]

Where you two talking about how tight the rear axle bolt was?? I would guess 90ft lbs and you are using a small crescent wrench and channel locks lol

[@carterkey9476]

Please keep this bike so it can be apart of ur cr family

[@joenatoli715]

Oh noo, the old 2 vintage music Is gone 😢

[@Junior-fd8ux]

Hey brother by the color of the oil you might have a leaking going on with the water pump..i know its buttoned up now. Also idk if you checked the seals but also that water pump gears shaft wears out on them. If your oil turns grey again that is prob what it is.. Hopefully not tho.. Keep up the good work

[@baileyturner1396]

Get some gasket paper you can make your own quick and easy when they brake like that just a thought guys 👍🏻

[@wd-40everything65]

Pick up a gasket punch set and different thickness gasket material.

[@hunterkamp64]

I cant find a decent priced cr125 anywhere I've been looking on marketplace and craigslist for months😕

[@2vintage]

Yeah the prices are inflated right now

[@brycerouzie2037]

I guess I’m not the only one who uses handlebars as a breaker bar

[@jacko3841]

I used a chair before for a breaker bar 😅😂😂

[@wd-40everything65]

It would have been more entertaining if they were still attached to the bike

[@wd-40everything65]

@Jacko thanks for the tip I'll try a chair next time! lol

[@joeyraharaha1793]

Never understood the black pipes.. instead of spraying the exhaust black... Wire brush and heat gun it so it looks like a pro circuit

[@leviprice7215]

Sick vid

[@HUSKY7-1]

Why does Chuck always wear his mum's slippers?

[@Cavem9n]

Probably because they are super comfy, I wear flip flops to work on mine😂👍

[@wd-40everything65]

She won't give up her army boots!

[@Josephbustamante641]

Should of got like a 45 tooth because u would have more top end for ur style of wide open riding

[@bogginhiillbillsendit6193]

First start coming in a day or so I assume !!!

[@bike_life_full_energy1534]

Do more I love this

[@jack_hodorowski2279]

You should do a kx100

[@brianbaird3]

I grew up on my dad’s kx100 when he got it as a teenager sadly the bike is no more but will live on in my memories

[@m8fusion712]

Good video

[@usmcchet1]

If i had oil that came out that dark and then made a milky circle in the middle. the first thing I would be thinking is rebuild the motor that thing has problems boss you have coolant in the motor

[@furcifer9717]

rly nice chanel

[@MrRossm2523]

Please do something about the white frame ! Don't understand why people do that! Offensive to the eyes! Haha

[@camc7187]

When’s the next giveaway?

[@twisted-xh6066]

Why would you waste money repackaging the silencer? It's not necessary. Also remember how to correctly measure the chain tension. You make your measurements at about the mid-point of the swingarm length, just to the rear of the chain guard. First, push the chain down, toward the swingarm and measure the distance between the bottom of the chain and then on top of the swingarm. Then, pull the chain up and make the same measurement. The difference between your two measurements shoud be about 1.25". Normally, measure around 0.75" when pushing the chain down and around 2" when pulling it up. I don't think I need to say this should be done with the tire off of the ground.

[@shaunsavage1726]

My buddy spray painted his Yamaha blaster then tore the hell out of it. He can't figure out why I won't sell him my 96 cr250 lol.

[@nicoperalta4160]

me ! :) love 2 vintage

[@jordansbikes819]

So then when we gunna see you racing chuck? Cr Vs cr your brother gunna smoke you😂👌

[@PureLogic.]

🔥🔥

[@sandmanbub]

Whoop!

[@matthewperkins3148]

New video!!

[@usmcchet1]

why in Gods green earth is the reason you are not using Loctite on the sprocket screws

[@glynroberts3005]

Brand new oil no way was that brand new why do you save old gaskets your just asking for something to fail in time there cheap enough just replace them. Did you use the old small end bearing to. And the tyres are dry rotted. And that piston if it was me I'd of rather send it back then take a Dremel to

[@jodyhakamaki5602]

You take the back ram off and do not replace the tire please explain to us... Those tires need to be replaced... That's why you're avoiding Showing them on the video....

[@jamest4383]

I can’t believe you put that exhaust back on. It’s junk, WTF?

[@machines1431]

U can file it

[@usmcchet1]

Dude a new shorty procurcuit silencer is 160 bucks just buy a new one.

[@polosatiboss7049]

👍👍👍👍

[@divergent2619]

ughh no prep work... just painting over shit

[@kadend2669]

Why on earth would you put that front fender number plate setup on a 30 year old bike🙄🤦‍♂️