Honda PCX 150 - Spark Plug Change | Mitch's Scooter Stuff

[@newaccountz9978]

Nice! Sparkplug torque value is very important. I wonder how to do that to my Honda Click 125 v3.

[@lurpakshakur8743]

Mitch i've just discovered and subscribed yesterday your PCX videos have helped me in my research so much, I'm looking to become a self-sufficient PCX 125 rider next week, so thank you for these videos, especially the torque settings! can I donate to you somehow? I'd love to see you do more videos on the new PCXs, would you ever do vids on valve clearance/clutch/breather/front suspension? Take care man x

[@hamradiotimes5586]

Great video you are a blessing for the do it yourselfer. Thx

[@kaylondelarosa3130]

I have 2013 Honda PCX 150 and your videos helped me a lot with maintenance Mitch. Thank you!! 🙏 and also do you have a link for tuning parts and any other aftermarket parts?

[@moniruddin4188]

Thanks for this video

[@catfish24]

Thanks for posting this video. It's very helpful.

[@MrSgtau]

Thanks for this video! I was having trouble with my PCX150 sputtering during acceleration, so I changed out the spark plug (which was rusty from the ethanol). Now, it runs like new!

[@MitchsScooterStuff]

Glad it helped!

[@housemasterjkm6332]

what ratio of ethanol you put in tank?

[@СиротинСергей-ж5л]

1. Спасибо большое за видео очень полезные! 2. Подскажи что за свеча подходит? не могу найти....(

[@TEREK1]

Он оставил под видео в описание вот этот: NGK (3901) CPR7EA-9 Standard Spark Plug

[@clivecarrington8814]

is the 125cc 2017 model in a different location panel, as I dont remember seeing this on my bike. I love your videos and only recently discovered you. Thank you

[@robertbleeswa8291]

Hey, I love your videos. Thank you very much for all the help. I have a 2019 PCX 150 and the fuel pump is only getting 7 V to it. I’ve checked the battery is fully charged and I’m just not getting any fuel in the pumping into the engine, I have the whole thing taken apart. I’ve checked the relays. They’re all fine. I don’t know if you’ve had any experience or could help. I appreciate it. Thank you.

[@Lalo__5555]

bro i'm having the same issue, what fixed it for you?

[@robertbleeswa8291]

Its was a bad fuel pump. I installed a new one and all works great.

[@marcelobybike]

Hi, I discovered your channel and I love it. Congratulations. Can you tell me if on the PCX 160 the spark plug socket is still 16mm? thanks.

[@FREEZER4000]

I have a 2017 PCX 150 , I tried to change spark plug , I've forgotten what prevented me from finishing.>(senior moment ). Any way I stumbled on your video and I'm re- inspired Thank you ! wish I had gotten the white color nice scooter! I love mine .

[@MitchsScooterStuff]

Right on! You’re welcome! 😁🙌🏼

[@disguyjordan]

Been watching a few of your videos. You've Been a huge help. ( I got a 2017 pcx)Just pulled out the spark plug to replace it. But then it got me wondering about the spark plug wire. Can it be removed and replaced through the same spot without removing the panels?

[@AiMR]

You make the best videos Mitch! Hey, what scooter do you think is the best value these days?

[@MitchsScooterStuff]

Thank you so much! Vespa for sure!

[@keith23uk]

On my 2021 (71 Plate) PCX 125 the spark plug installed by Honda is an NGK LMAR8L-9 as stated on the plug. Am I correct in assuming code NGK CPR7EA-9 has the same dimensions? The spark plug Honda installed is more expensive but can find little info if its better quality.

[@na666zar]

Follow the manual

[@EB1156]

I've watched a few of your videos and appreciate them. I will point out, however, that you are using the torque wrench slightly incorrectly. When using that beam-type torque wrench, neither end of the handle should be touching the bar. The handle should be "floating" so the torque is transmitted from the handle pivot point. That is how that wrench was designed and calibrated. Granted, for this type of work, it is definitely close enough. But thought I should mention it for others' benefit. Thank you.

[@mortaltombat4740]

I'm glad that someone else noticed this too. Otherwise, nice video!

[@kenzeno21]

If your having a hard time getting to the spark plug after removing the cover take the bike off the center stand ... use the side stand

[@FREEZER4000]

how does that change anything ? I have a 2017 PCX 150 THX

[@pilyomotoride7781]

Mitch can you do a video how to remove all fairings on the pcx . This is the only hard part of maintaining pcx 😆

[@DailyMotor1]

Well done.

[@giovannirizzi9124]

Hi there, thank you for your videos, they are very helpful. I have installed a denso iu22, a iridium spark plug and torqued it at 12 Nm. Do you think I should tighten it to 16 nm?

[@ducnguyenminh6165]

you should torque the plug to 16Nm for the best spark, too tight the plug may hit the piston and damage the engine. otherwise you'd get weak spark and the plug may come off the engine due to compression

[@TheRk1969]

Very useful. Thank you 👍

[@rubenpineyro7969]

Gracias amigo desde ARGENTINA, tengo una por eso me interesa. 😊

[@1WEEBLE1]

Another great video 👍👍👍👊👊👊

[@MitchsScooterStuff]

Thanks 👍

[@filosofolowcost]

hi. I've torqued my sparkplug at 24Nm instead 16. can I have any problem? the scooter works perfectly

[@nicktran6996]

Thank you very much

[@brendanstorey7005]

Hi Mitch what's the mark on the spark plugs cap, looks like a 7 or l?

[@MitchsScooterStuff]

Hey, I am not sure... the factory did that for some reason?

[@brendanstorey7005]

@@MitchsScooterStuff thanks Mitch🤩

[@paddyj2011]

I changed the spark plug there's a spark but when I release either the start button or the break the scooter just cuts out..also a battery warning light cane on..I jump started it and still won't stay idling what should I do ? Maybe leave the battery on charge overnight ? I

[@kennynhannguyen8666]

Good job

[@siukeikwok82]

Thank you

[@MrRasMalai007]

My pcx 125 goes so slowly from 1st gear, like when i start or when i am traffic lights and i accelerate it takes few seconds to gain speed. Its not how it used to be. What do u think? Should i change plug or the cap. Because the mechanic added some liquid to clean cap few days ago and i think he forgot to dry it and attached to the plug and since then i have had this issue. Please help.

[@happymclovin2628]

why did you change it?

[@jasonga]

Fit an Iridium (CR7IEX) They hardly need touching and engine runs slightly more crisper

[@Abhishek-C92]

stock condition plugs are better then aftermarket iridium ones.

[@moza260]

what happen when the gap is too wide?

[@lafonsopresley6024]

What kinda spark plugs you use

[@MitchsScooterStuff]

Link is in video description !

[@kazenukezu06]

is this applicable to honda adv 150?

[@samcrxking]

Yes

[@barneykennett9282]

Nice...👍.

[@MitchsScooterStuff]

Thanks 😊

[@mulefish6423]

hiiii what is the namber of the key

[@田仲てろりん]

車載工具でプラグ交換の工具あるでしょ？何故使わん ちなみに 車載工具使う時は メインスタンドでは無くて サイドススタンドで やると 交換出来ます。 メインスタンドだと フレームにぶつかり交換できない

[@zubeydesen6166]

👍👏👏👏

[@ياسرعمار-ذ2ش]

سلام عليكم

[@lordracula2461]

No phillips screwdriver, use JIS! Phillips will damage the screws

[@ovidiurisco1251]

Jis?

[@lordracula2461]

@@ovidiurisco1251 Japanese Industrial Standard - looks the same as Phillips but they are not fully compatible with the phillips screwdrivers. It's ok if you have no other option but you will chew up the screws if they are more than a little tight.

[@andrewbozhozr]

@@lordracula2461 and they are easy to find....

[@jaywinters2483]

It’s just a sheet metal screw going into plastic. Don’t be a know-it-all.