Honda Pressure Washer Engine Disassembly (

[@mk8530]

Anybody with me , when I say - "I rue the day I bought a Pressure Washer". :🙄 A long haul trucker has less maintenance.

[@vc.la.sucvathosucvat6483]

Very helpfull video !!! Thank you so much...

[@philc9305]

My oil seal under the fly wheel pops off shortly after starting. The crank case valve isn't clogged. Do I have a bigger issue going on, or should I just replace the seal? It seems like there should be a retainer clip for the seal but it just holds via friction?

[@dsalaz04]

Helpful video! Does anyone know the torque spec for the valve cover bolts?

[@threewheelerdonuts8284]

I jest tighten them till there snug. They don't need to be very tight.

[@bryanstock281]

108 in lbs. / 9 ft lbs.

[@dsalaz04]

@@bryanstock281 Thanks

[@rolandomartinez1980]

En español x favor

[@dabomboo7o]

had a stuck valve on my power washer, tapping with a hammer and using carb cleaner freed it.. put in cam the wrong way without checking the piston on top.. fixed that and now it works great.!! saved and didnt get scammed by going to the shop! thanks!

[@repairclinic]

+dabomboo7o Thank you for sharing.

[@florintamas4439]

Don’t clean the carburetor the old way! With GumBuster, let the carburetor clean itself: kzbin.info/www/bejne/d3bTZntrfd9qhKc

[@wildsmooth9201]

Good luck removing the long exhaust bolts without them breaking off in the engine block. What a hunk of shit this motor is.

[@PompilioBarrio]

Pregunta en la bomba de agua qué tipo aceite lleva puedes ayudarme en otro vídeo como darle mantenimiento?

[@danielsefair6258]

Necesito un carburador para hidrolavadora marca honda referencia GVC 160, igual a la del vídeo, urgente. Ubicado en COLOMBIA..

[@hendrikvanderhorn1650]

I would like to get publications on the repairs and tools and specs

[@repairclinic]

+Hendrik van der Horn You may want to contact the manufacturer for something like that. We sell parts and create how to videos.

[@captainmikek6172]

Good Video, Thanks..

[@danielsefair6258]

Necesito un carburador para hidrolavadora marca honda referencia GVC 160, igual a la del vídeo.

[@danielsefair6258]

Necesito urgente un carburador para hidrolavadora Honda Gcv 160, el carburador es igual al del vídeo.

[@metallitech]

1:38 Shouldn't it be a breaker bar instead of a ratchet?

[@lurkin_z7128]

metallitech thats what i thought to

[@flightscapeaviationphoto]

Brilliant and THANK YOU ... had a 2 yr old unit used perhaps 7 or 8 times in that 2 yrs. Went to fire it up and for the first time ... refused to start . Tried at least 20 times ... nothing. Went straight to the carburetor bowl as you described, pulled out the nozzle and the perforated intake tube and BAM...full of debris ... blew it out with canned compressed air made sure I could see light though all openings. Installed it back in place, put the aluminum bowl back on. ... opened fuel valve and FIRED RIGHT UP. 🙌😎. Thanks sir !!!

[@repairclinic]

Awesome great job!

[@TheDoRightDudley]

You need to edit the title...

[@nelsonmartinez2907]

I have this same washer. I finally cleaned the the carb out and got it running after a year of sitting in shed and after being flooded during hurricane harvey. I got it started and it works fine but do you recommend I do anything else to it?

[@sammie9074]

How much did you get it for

[@themowerman]

Cool

[@roquetorres7427]

Porquen contestan lo q uno pregunta

[@metallitech]

So am I right in thinking that on these engines we don't control the throttle directly, we give a setting to the governor and then the governor controls the throttle?

[@sammie9074]

How much is this pressure machine?

[@tomwilson4156]

Pump replacement

[@roquetorres7427]

,porqun

[@GIOVACOLOMBIA]

GOOD VIDEO,TKS

[@felipetorres6701]

ok

[@NT-bm5sj]

GOOD VIDEO