I like how fast you are and how simple your explanations are.
@CarbonXe12 жыл бұрын
Thanks for the video, this is exactly what I was looking for. I bought a set of new wheel bearings/hubs for my 2000 Accord and wanted a heads up of what to expect before just diving in. Great work and much appreciated!
@michaelelindsey8 жыл бұрын
Thank you for posting this. My inner race was stuck on the spindle and it was easy to remove after watching your video.
@BB420INC11 жыл бұрын
Finally someone on KZbin that knows what they're doing. Nice video
@shambop19 жыл бұрын
I sincerely thank you for doing this. I just completed a replacement thanks to you. The chisel and punches worked well. Most appreciative
@technodance_me11 жыл бұрын
Sweet. I'm getting growl from the rear too on my 99. Now I know how to get this fixed. Cheers mate!!! Nice clean video too.
@andrewthomas58979 жыл бұрын
Thank you very much! I'm replacing the rear hub assembly on a 2003 Acura TL, and yes, these are the exact same parts and steps used to get the job done. You saved me a lot of time and extra hassle.
@ewetoob2tube10 жыл бұрын
Thumbs up to this video. Really accurate walk through. Replaced rear bearings on 2003 accord and it went relatively easy. Be sure to use a tongue wrench to tighten them down. Believe specs are 134 lbs.
@MrFryco2011 жыл бұрын
Dude, you saved me about $250 plus tax. Thanks and God bless you.
@A_SEGA_Dremcast11 жыл бұрын
Thank you! I'll be replacing them on my Integra soon, and this is exactly what I'll have with me as reference. Thanks again!
@straightshooter60319 жыл бұрын
Great viedo! I had trouble "walking" the inner bearing race off so I used a Dremel tool (cutting disk) to cut a slot in the race to have a place for my chisel to bite...then it pounded right out. Thanks !
@TheJuan_N_0nly8 жыл бұрын
thanks bro, helped me out tremendously.... you are a good teacher...
@Mrblablabla7211 жыл бұрын
Thanks with your video i have to do this and you save my life...Thanks for the answer of the 32 mm to the other fellow it help a lot as i need to get that socket. Thanks again for that.
@simbo9msn10 жыл бұрын
Great video. Helped me with my 2000 Acura TL.
@kizito88883 жыл бұрын
I also have two bolts stuck on the dust shields. Thanks for the tip.
@728641212 жыл бұрын
@sbakar Thanks for the feed back, it's good to see people enjoying my videos.
@mrrobot18411 жыл бұрын
Nice video. Looks like it will help with the 1997 acura as well.
@728641212 жыл бұрын
On the front you can change just the bearing, but auto parts stores dont carry just the bearings for the rear. If you can press the old bearing out of the hub and find the proper bearing then I would say yes.
@stopper2012 жыл бұрын
Great Video, easy to follow thank you!!
@songsyluc9 жыл бұрын
Hello Michael, I have a question. what is the easiest way to remove the Bearing from the Hub ? because i want to keep my old hub that has extended studs on.
@VAroute669 жыл бұрын
Great video. Thanks.
@slimm73010 жыл бұрын
Awesome video... Is this the exact same method for rear wheel bearing on a 95 accord @Micheal Thornberry
@m----12 жыл бұрын
so you replace the entire assembly, hub and all. couldnt the old bearing be removed from the hub and just that part be replaced?
@timrichardson199012 жыл бұрын
Yeah buddy!!! Also what's the size of the hub bolt
@zbinawhitetee11 жыл бұрын
Nice video. Thanks
@Nabila.9 жыл бұрын
My inner bearing race is stuck, besides the chisel, what else can I do to remove it
@SyFyBry8 жыл бұрын
+Nabila Doupo What did you end up doing? I have that issue
@Nabila.8 жыл бұрын
The new bearing comes with a new bearing race, so use a chisel to separate the race. I Also used Pb blaster and a big hammer.
@SyFyBry8 жыл бұрын
+Nabila Doupo Got it. Cool, thanks! I'l try that next. Pb blaster has come up 3 times this weekend. I better get some LOL
@armandogarza830110 жыл бұрын
Does the gear/pulley for the ABS come with the whole hub assemblly or do you have to pull it off to place it on the new hub?
@luisparamo94024 жыл бұрын
Did you ever find out ?
@90ls19 жыл бұрын
Is this the same for a 2004 Honda Accord rear wheel hub/bearing??
@rmg23447 жыл бұрын
TrailLIFE should be this video i think covers 03-07
@javiderek3111 жыл бұрын
Just replaced my rear wheel bearing and the noise is still there it's a humming noise gets louder as I accelerate and when im at highway speeds and slightly turn left it gets louder. And ideas?
@kizito88883 жыл бұрын
Looking for a 1998 Honda accord lx v6 rear dust shields. Been looking for 3 weeks and can't find the right part. Mine broke down from rust. If anyone could help. Thanks
@RamRam-mz9gj9 жыл бұрын
What size is the axle nut?
@zendannyy10 жыл бұрын
Is that axle nut reusable?
@hakaking50058 жыл бұрын
How can i replace rear wheel bearing honda crv bj 98?
@garysmart15 жыл бұрын
mine sound like " pattern "CHUGGING" noise
@728641212 жыл бұрын
it's a 32mm.
@scottshires73947 жыл бұрын
American History
@lgttb112 жыл бұрын
honda just charged me $386.00 to replace one rear wheel bearing !
@Titan-qd9rg10 жыл бұрын
🎉Thank You 🎊sooooo😱 fucking much dude I've been trying to fix🔧dis 4 a long time I'm doing this to my maximum