Honda XL1000 Varadero - Removing the cam chain

  Рет қаралды 10,495

The Amateur Bike Builder

The Amateur Bike Builder

Күн бұрын

Пікірлер: 19
@dansouthby4259
@dansouthby4259 4 жыл бұрын
Great work Keith bought a varadero 6 months ago and it really does help watching your videos. In the last 40 years my enthusiasm for bikes has always outweighed my ability it really gives me and others the confidence to have a go. Thanks Dan
@TheAmateurBikeBuilder
@TheAmateurBikeBuilder 4 жыл бұрын
Thanks Dan, Appreciate your comment, glad you enjoy the video's, that the basis of the channel, to learn and have a go, most of the things i do are my first time, armed with a manual, the internet and forums, the channel is growing as a lot of like minded people are finding me, i am just a normal bloke in a normal garage, nothing flash, doing what i enjoy
@Duc1198
@Duc1198 Жыл бұрын
Just bought one of these as a project bike and it's great see the info.
@TheAmateurBikeBuilder
@TheAmateurBikeBuilder Жыл бұрын
Thanks, glad it helped
@thompam57
@thompam57 4 жыл бұрын
Wow, so many parts you’ve had to remove! Looking forward to se you smile when you are finish. I could never do this to my bike. Bravo👍 /Thomas 🇸🇪
@TheAmateurBikeBuilder
@TheAmateurBikeBuilder 4 жыл бұрын
Thanks Thomas, if i can do it so can you, its just research / forums and reading the manual and practice, that is the basis of my channel that you can have a go/ learn, i am not a qualified mechanic, but i enjoy a challenge and like pushing my knowledge boundaries
@midlife666
@midlife666 4 жыл бұрын
Great video , loads of useful information . Keep them coming
@TheAmateurBikeBuilder
@TheAmateurBikeBuilder 4 жыл бұрын
Thanks, will do, glad you enjoyed it
@ΝίκοςΨυλλιάς
@ΝίκοςΨυλλιάς 4 жыл бұрын
Hello again. Tell us if you remember the measurements from the valves of each cylinder. It would be a good opportunity to adjust them to finally have a brand new engine You can count now if you have not already done so. I am waiting to see the engine ready for the ride again and to hear the sound of your engine again. Well done for the work you do.
@TheAmateurBikeBuilder
@TheAmateurBikeBuilder 4 жыл бұрын
Hello, appreciate your comment i will not be doing the valve clearances, as they were done only a few months ago, new shims were fitted then,
@marshallcollins8634
@marshallcollins8634 4 жыл бұрын
I just found your channel and I sent you some info on the KZ650 air box video. I don't know how this works but I thought I might let you know . Just in case you don't get some type of notifications.
@TheAmateurBikeBuilder
@TheAmateurBikeBuilder 4 жыл бұрын
Thanks for the info!
@ΝίκοςΨυλλιάς
@ΝίκοςΨυλλιάς 4 жыл бұрын
Good Evening. I watched your videos and I can tell you that I envied you that you have the time and space to build your motorcycle. I hope everything goes well. I would like you to tell us at the end if this would not cause you a problem the total amount of money needed for the repair. Also if you have ever changed the tensioners or if you had any indication before that something was wrong
@TheAmateurBikeBuilder
@TheAmateurBikeBuilder 4 жыл бұрын
Hello, thank you for your comment, i wish i had more time, i get about 6-7 hours a week at the moment and yes it is nice to have a garage to work in, i will be doing a video at the end of the series, explaining where the parts came from and how much they cost, i have never changed the tensioners and they was not much indication other than a loud rattle and loss of power, i bought the bike 7 years ago with 19.0000 miles on it, it now has 93,000 miles on it
@gino1340
@gino1340 4 жыл бұрын
Mate question have you ever had the pan European on the ABBA sky lift
@TheAmateurBikeBuilder
@TheAmateurBikeBuilder 4 жыл бұрын
Thanks Gino, yes i have, here is the link to that video - kzbin.info/www/bejne/bJfbdIeXmZydppo
@gino1340
@gino1340 4 жыл бұрын
Thanks mate appreciate it cheers
@leszekm4414
@leszekm4414 4 жыл бұрын
when is the next part with the left side? What is the cost of the alternator remover?
@TheAmateurBikeBuilder
@TheAmateurBikeBuilder 4 жыл бұрын
Thanks Leszek. that will be in the next episode on Wednesday, there will be a link in the description of that video to the to where you can get the puller
Honda XL1000 Varadero - Removing the rotor and cam chain
21:48
The Amateur Bike Builder
Рет қаралды 3,4 М.
Honda XL1000 Varadero  - Engine Rebuild  Part 2 of 2
18:26
The Amateur Bike Builder
Рет қаралды 8 М.
小蚂蚁会选到什么呢!#火影忍者 #佐助 #家庭
00:47
火影忍者一家
Рет қаралды 126 МЛН
Бенчик, пора купаться! 🛁 #бенчик #арти #симбочка
00:34
Симбочка Пимпочка
Рет қаралды 4 МЛН
Honda XL1000 Varadero karbantartás / maintenance part 2
28:14
KaoszGarage
Рет қаралды 9 М.
Honda XL1000  Varadero - I'm going In - Part 1 of 2
14:29
The Amateur Bike Builder
Рет қаралды 10 М.
Honda Varadero bad cam chain tensioner replacement
8:48
MotorSocial
Рет қаралды 13 М.
Honda XL1000 Varadero  - Engine Rebuild Begins Part 1 of 2
16:22
The Amateur Bike Builder
Рет қаралды 5 М.
5 Things I Hate about the Honda Varadero (English)
6:48
2 Greek Wheels
Рет қаралды 38 М.
Honda XL1000 Varadero  - Refitting the Clutch / Water pump
18:38
The Amateur Bike Builder
Рет қаралды 8 М.
Gabelservice bei Honda XL1000V SD02 Varadero
11:37
Doc Freeman
Рет қаралды 78 М.
How to remove carburetors from a Honda xl1000v varadero.
8:06
mastorakos
Рет қаралды 11 М.