Honda XL750 Transalp 2023 - OEM ENGINE GUARD AND SKIDPLATE INSTALL - Complete Video Tutorial

🔴 JOIN IN OUR MEMBERSHIP COMMUNITY FOR EXTRA BENEFITS:
/ @idealbike
🔴 JOIN US ON:
👥 FACEBOOK / idealbikemoto
📸 INSTAGRAM / ideal.bike
🔔 Subscribe for more videos: kzbin.info?s...
👥 OUR FACEBOOK COMMUNITY GROUPS:
/ idealbikemoto
/ 1339974263528992
We've installed the Rally Pack for the new 2023 Honda Transalp XL750, in this video tutorial you will see all the required installation procedures.
#xl750transalp, #hondatransalp, #transalp2023
🔴 To prevent burns, allow the engine, exhaust system, radiator, etc., to cool before installing the accessory. Because it requires specialized knowledge and special tools and equipment, it is recommended to install it at a dealer with qualified
automobile maintenance.
🔴 Honda Motorcycle Service by ASKO GROUP
honda.asko.ro/motociclete/
🔔 ALAMI BAHA (Director Service Moto)
0752.762.662
[e-mail]
Șos. de Centură 57, Chiajna
🔔 Schedule
Mo-Fr: 08:00-17:00
Sa: Closed
Su: Closed

[@IdealBike]

🔴 JOIN US ON: 👥 FACEBOOK facebook.com/idealbikemoto 📸 INSTAGRAM instagram.com/ideal.bike 🔔 Subscribe for more videos: kzbin.info We've installed the Rally Pack for the new 2023 Honda Transalp XL750, in this video tutorial you will see all the required installation procedures. 🔴 To prevent burns, allow the engine, exhaust system, radiator, etc., to cool before installing the accessory. Because it requires specialized knowledge and special tools and equipment, it is recommended to install it at a dealer with qualified automobile maintenance. 🔴 Honda Motorcycle Service by ASKO GROUP honda.asko.ro/motociclete/ 🔔 ALAMI BAHA (Director Service Moto) 0752.762.662 [e-mail] Șos. de Centură 57, Chiajna 🔔 Schedule Mo-Fr: 08:00-17:00 Sa: Closed

[@kpappa]

Very hard work to do it by yourself. At least the tricky part is to mount the first two symmetrical plates on the chassis. After that, I believe it is easy for someone to install the rest of the pieces by himself. I'll wait to do it on the first 1000KM initial service on an authorized service, not void the warranty by me !

[@alsacs3635]

Thanks for posting. I installed mine without issue except I dropped one of the nuts for the engine bracket and it disappeared. I I am not kidding, my garage floor is spotless but somehow the nut vanished into oblivion so I had to buy a new flange nut.

[@IdealBike]

I know that feelings, sometimes it can happen....greeetings

[@bluevalkyrie2517]

Right side bar, compare 3:30 to 17:34.

[@IdealBike]

It's debatable because it's different in the video Honda commercial, in the manual it's different left to right... Anyways it really does not make any difference.

[@fvmmotovlog145]

Hi Ideal Bike Nice tip about the water 👌 My favourite videos 😎✌️

[@IdealBike]

Hello 👍 Yes the service guys are thinking about all these details, it's coming from experience

[@aGentleUser]

1400 is a lot, aftermarket stuff for my freewind was about 300. But the oem parts look and fit really great!

[@IdealBike]

Yes, only aftermarket option at this time it's SW Motech... They look too bulky, but for example the SW Motech skidplate has 4mm instead of 3mm OEM.. The rest seems the same. Also for the Handguards we have SW Motech BB STORM and Acerbis these are much better than the OEM

[@yubtypin]

Looks really good.

[@yoni207]

Hi. Thank you for the excellent videos you uploaded on the topic of mounting protection for the Transalp and the quickshifter. The videos are really good and helpful for a person who wants to assemble these parts by himself. I wanted to draw your attention to the original skid plate, which is produced by the Honda company and mounted on the Transalp, the thickness of the aluminum is very thin and stands at only 2.5 millimeters. This thickness will not protect the bottom of the engine in rocky terrain and the bottom of the engine can crack. It would be better to install a thicker material of at least 3-4 millimeters, as other manufacturers do. Also, it would have been better to have all the screws with Loctite so they wouldn't loosen due to the vibrations while driving.🎉

[@IdealBike]

Hello, thanks for the comment! The thickness of the skidplate it's from 2,8 up to 3,5mm maximum measured precisely, on the bottom it's 3mm and on the bolts area it's 3,5mm, I consider enough for normal gravel roads. If you want extreme Off-road then a 4mm thickness would be better (this is the one from Sw-Motech). All the bolts have special locktite solution applied especially the important ones. Greetings!

[@seanschabatka4439]

Great video Really appreciate the time and effort 👍

[@IdealBike]

Thank you for the comment

[@echoalphatango9945]

New subscriber in the philippines

[@IdealBike]

Thanks a lot, appreciate it !

[@eralpdemirkazik9142]

Vov this iş a great video thank you son much. Also can we use loctite like nut locker on screws near the engine

[@IdealBike]

Thanks for the comment, appreciate it. Yes, it's recommended it 👍

[@stathisandrianakis7814]

On the manual, the connection of the engine guard on the right side next to the brake lever, is shown to be from the inside of metal. Here you show it connected to the outside

[@IdealBike]

It's really doesn't matter, in the Honda manual it was like that, but on the commercial it was the other way 😅

[@tech-travel101]

Not sure if there is a difference but the instructions said the right engine guard the end of it should install behind the frame. You installed on top of the frame.

[@IdealBike]

It makes no real difference honestly. It's like in the Honda service manual. But in the commercials it's behind.

[@tech-travel101]

@@IdealBike Thanks

[@IdealBike]

@tech-travel101 you're welcome

[@nevangelos9277]

Arthur measure the ground distance with skid plate on.

[@IdealBike]

I will

[@nevangelos9277]

@@IdealBike Αrthur you must think twice if you plan to put the Upper Side Pipes cause the Transalp will lost its beauty. Its protection VS beauty.

[@IdealBike]

I have to put them... Unfortunately the look will be not so nice... It will cover the Transalp logo from the side. I will sacrifice the look for the protection.

[@godowskie]

Also interested in ground clearance with skid plate

[@IdealBike]

Need some help to measure correctly. I guess it's at least 50mm less than 210 mm standard

[@TheBl4zon]

Hi, I'm installing engine guard this weekend by myself. Please let us know what exactly is the torque for 10x75mm flange bolts. Thank you 😊

[@IdealBike]

Hello, for the main bolts it's 44 Nm.

[@TheBl4zon]

@@IdealBike thx 👍

[@irarabesc]

Does anyone know the exact weights of the OEM skid plate, engine guard and front side pipe?

[@IdealBike]

The complete RALLY PACK has 10 Kg, this I've measured. Front side pipe has at least 3,5 Kg, Engine Guard about 2,5 Kg, skidplate 1,5 Kg (these are the approximate weights

[@AmeriMutt76]

What's the ground clearance under that guard now?

[@IdealBike]

From 210mm it goes down to 3 mm plus another 7mm at least. It's maximum 200mm

[@fabricefauconnier4617]

Can we install this system on the Hornet?

[@IdealBike]

For the Hornet need to ask

[@niospartan]

I hate when companies offer oem parts that shoulda just been on to begin with.

[@IdealBike]

Imagine that some basic accessories just for start they cost about 2000 EUR, which is more than 15% of the bike's retail price

[@thodoris3790]

no no,not this one ,its ugly.the hepco-becker....

[@IdealBike]

It was not an option at the time I bought the bike, needed to mount it. greetings